APT60D60BG

600V APT60D60B APT60D60BG* 60A APT60D60S APT60D60SG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching -2 4 7 D 3 PAK 1 2 • Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current • PFC 2 1 2 1 • Increased System Power Density 1 - Cathode 2 - Anode Back of Case - Cathode All Ratings: TC = 25°C unless otherwise specified. MAXIMUM RATINGS Symbol VR Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 135°C, Duty Cycle = 0.5) IFSM TJ,TSTG TL UNIT 600 Volts Maximum D.C. Reverse Voltage VRRM IF(RMS) APT60D60B_S(G) 60 RMS Forward Current (Square wave, 50% duty) 132 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 600 Amps -55 to 175 Operating and StorageTemperature Range °C 300 Lead Temperature for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS VF Characteristic / Test Conditions Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V MIN TYP MAX IF = 60A 1.6 1.8 IF = 120A 1.9 IF = 60A, TJ = 125°C 1.4 Volts VR = 600V 250 VR = 600V, TJ = 125°C 500 Microsemi Website - http://www.microsemi.com 90 UNIT μA pF 053-6001 Rev K 5-2011 Symbol DYNAMIC CHARACTERISTICS Symbol Characteristic Test Conditions trr Reverse Recovery Time trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM Reverse Recovery Time Qrr Reverse Recovery Charge trr Qrr IRRM IF = 1A, diF/dt = -100A/μs, VR = 30V, TJ = 25°C IF = 60A, diF/dt = -200A/μs VR = 400V, TC = 25°C Maximum Reverse Recovery Current trr IRRM APT60D60B_S(G) IF = 60A, diF/dt = -200A/μs Maximum Reverse Recovery Current VR = 400V, TC = 125°C Reverse Recovery Time IF = 60A, diF/dt = -1000A/μs Reverse Recovery Charge Maximum Reverse Recovery Current VR = 400V, TC = 125°C MIN TYP MAX - 40 - 130 - 220 - 4 - 170 ns - 920 nC - 10 - 80 ns - 1900 nC - 38 Amps MIN TYP UNIT ns nC - - Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .34 RθJA Junction-to-Ambient Thermal Resistance 40 WT Torque Package Weight oz 5.9 g 10 lb•in 1.1 N•m Microsemi reserves the right to change, without notice, the specifications and information contained herein. 0.7 0.20 0.5 Note: 0.15 0.3 0.10 t1 t2 t 0.05 0 053-6001 Rev K 5-2011 D = 0.9 P DM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.35 0.25 0.1 SINGLE PULSE 0.05 10 -5 10 Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION -4 °C/W 0.22 Maximum Mounting Torque 0.30 UNIT APT60D60B_S(G) 200 180 180 160 140 120 100 TJ = 125°C 80 TJ = 25°C 60 TJ = 150°C 40 TJ = -55°C 20 0 0 0.5 1 1.5 2 2.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 2500 T = 125°C J V = 400V R 2000 120A 60A 1500 1000 30A 500 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 160 60A 140 30A 120 100 80 60 40 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/μs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 40 35 T = 125°C J V = 400V 120A R 30 25 20 60A 15 30A 10 5 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 160 Qrr Duty cycle = 0.5 T = 175°C J 140 120 trr IRRM 0.6 100 80 60 0.4 Qrr 0.2 0.0 R 0 1.0 0.8 T = 125°C J V = 400V 120A 20 IF(AV) (A) Kf, DYNAMIC PARAMETERS (Normalized to 1000A/μs) trr trr, REVERSE RECOVERY TIME (ns) 200 IRRM, REVERSE RECOVERY CURRENT (A) IF, FORWARD CURRENT (A) TYPICAL PERFORMANCE CURVES 40 20 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 600 500 400 5-2011 300 200 100 0 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-6001 Rev K CJ, JUNCTION CAPACITANCE (pF) 700 APT60D60B_S(G) Vr APT60M75L2LL diF /dt Adjus t +18V 0V D.U.T. 30μH trr/Q rr Wavefor m PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 I F - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 I RRM - Maximum Reverse Recovery Current 4 e diode trr - Revers e R ecovery Time, measured from zero crossing wher current goes from positive to negative, to the point at which the straight line through I RRM and 0.25 I RRM passes through zero . 5 1 4 Zer o . 5 0.25 I RRM 3 2 Q rr - Area Under the Curve Defined by I RRM and trr. Figure 10. Diode Reverse Recovery and Definitions D3PAK Package Outline TO-247 Package Outline e3 100% Sn 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) 6.15 (.242) BSC 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05(.632) 1.00 (.039) 1.15(.045) Cathode 20.80 (.819) 21.46 (.845) 0.40 (.016) 0.65 (.026) 5-2011 0.40 (.016) 1.016(.040) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.90 (.075) 2.10 (.083) 1.20 (.047) 1.40 (.055) 5.45 (.215) BSC (2 Plcs. ) Anode 2.21 (.087) 2.59 (.102) Cathode Anode Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches ) 13.30 (.524) 13.60(.535) 12.40 (.488) 12.70 (.500) 18.70 (.736) 19.10 (.752) 3.50 (.138) 3.81 (.150) 4.50 (.177) Max . 053-6001 Rev K Cathode (Heat Sink) e1 SAC: Tin, Silver, Copper Dimensions in Millimeters (Inches ) 2.40 (.094) 2.70 (.106) (Base of Lead) Heat Sink (Cathode) and Leads are Plated