APTM50AM35FTG

APTM50AM35FTG VDSS = 500V RDSon = 35m typ @ Tj = 25°C ID = 99A @ Tc = 25°C Phase leg MOSFET Power Module VBUS NTC2 Q1 G1 S1 OUT Q2 G2 S2 0/VBU S NTC1 Application  Welding converters  Switched Mode Power Supplies  Uninterruptible Power Supplies Features  Power MOS 7® FREDFETs - Low RDSon - Low input and Miller capacitance - Low gate charge - Fast intrinsic reverse diode - Avalanche energy rated - Very rugged  Kelvin source for easy drive  Very low stray inductance - Symmetrical design - Lead frames for power connections  Internal thermistor for temperature monitoring  High level of integration Benefits  Outstanding performance at high frequency operation  Direct mounting to heatsink (isolated package)  Low junction to case thermal resistance  Solderable terminals both for power and signal for easy PCB mounting  Low profile  RoHS Compliant Absolute maximum ratings ID IDM VGS RDSon PD IAR EAR EAS Parameter Drain - Source Breakdown Voltage Tc = 25°C Tc = 80°C Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25°C Max ratings 500 99 74 396 ±30 39 781 51 50 3000 Unit V A V m W A mJ These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1–7 APTM50AM35FTG – Rev 3 October, 2012 Symbol VDSS APTM50AM35FTG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic IDSS RDS(on) VGS(th) IGSS Zero Gate Voltage Drain Current Drain – Source on Resistance Gate Threshold Voltage Gate – Source Leakage Current Test Conditions Min VGS = 0V,VDS = 500V Tj = 25°C VGS = 0V,VDS = 400V Tj = 125°C VGS = 10V, ID = 49.5A VGS = VDS, ID = 5mA VGS = ±30 V, VDS = 0V Typ 35 3 Max 200 1000 39 5 ±150 Unit Max Unit µA m V nA Dynamic Characteristics Symbol Ciss Coss Crss Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VGS = 0V VDS = 25V f = 1MHz Qg Total gate Charge Qgs Gate – Source Charge Qgd Gate – Drain Charge VGS = 10V VBus = 250V ID = 99A Td(on) Tr Td(off) Turn-on Delay Time Rise Time Turn-off Delay Time Tf Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Min Typ 14 2.8 0.2 nF 280 nC 80 140 21 Inductive switching @ 125°C VGS = 15V VBus = 333V ID = 99A RG = 1 38 ns 75 93 Inductive switching @ 25°C VGS = 15V, VBus = 333V ID = 99A, RG = 1Ω 2070 Inductive switching @ 125°C VGS = 15V, VBus = 333V ID = 99A, RG = 1Ω 3112 µJ 1690 µJ 2026 Source - Drain diode ratings and characteristics trr Reverse Recovery Time Qrr Reverse Recovery Charge Test Conditions Min Typ Tj = 25°C Max 99 74 1.3 15 270 Tj = 125°C 540 Tc = 25°C Tc = 80°C VGS = 0V, IS = - 99A IS = - 99A VR = 333V diS/dt = 200A/µs Tj = 25°C 5.2 Tj = 125°C 19.2 Unit A V V/ns ns µC  dv/dt numbers reflect the limitations of the circuit rather than the device itself. IS  - 99A di/dt  700A/µs VR  VDSS Tj  150°C www.microsemi.com 2–7 APTM50AM35FTG – Rev 3 October, 2012 Symbol Characteristic IS Continuous Source current (Body diode) VSD Diode Forward Voltage dv/dt Peak Diode Recovery  APTM50AM35FTG Thermal and package characteristics Symbol RthJC VISOL TJ TSTG TC Torque Wt Characteristic Junction to Case Thermal Resistance Min RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz 4000 -40 -40 -40 2.5 Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight To Heatsink M5 Typ Max 0.16 150 125 100 4.7 160 Unit °C/W V °C N.m g Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K RT  Min Typ 50 3952 Max Unit k K R25 T: Thermistor temperature   1 1  RT: Thermistor value at T exp  B25 / 85     T25 T   See application note APT0501 - Mounting Instructions for SP4 Power Modules on www.microsemi.com www.microsemi.com 3–7 APTM50AM35FTG – Rev 3 October, 2012 SP4 Package outline (dimensions in mm) APTM50AM35FTG Typical Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 0.18 0.16 0.9 0.14 0.7 0.12 0.1 0.5 0.08 0.06 0.3 0.04 0.1 0.05 0.02 Single Pulse 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) Low Voltage Output Characteristics ID, Drain Current (A) VGS=10&15V 7V 200 6.5V 6V 100 5.5V 150 5 10 15 20 VDS, Drain to Source Voltage (V) VGS=20V 0.95 0.9 40 60 80 100 2 4 6 8 DC Drain Current vs Case Temperature 1 20 TJ=-55°C VGS, Gate to Source Voltage (V) VGS=10V 0 TJ=125°C 0 25 Normalized to VGS=10V @ 49.5A 1.05 50 0 RDS(on) vs Drain Current 1.1 TJ=25°C 100 5V 0 0 200 120 ID, Drain Current (A) www.microsemi.com 100 90 80 70 60 50 40 30 20 10 0 25 50 75 100 125 TC, Case Temperature (°C) 150 4–7 APTM50AM35FTG – Rev 3 October, 2012 300 VDS > ID(on)xRDS(on)MAX 250µs pulse test @ < 0.5 duty cycle 250 ID, DC Drain Current (A) ID, Drain Current (A) 8V RDS(on) Drain to Source ON Resistance Transfert Characteristics 300 400 1.2 1.1 1.0 0.9 0.8 0.7 -50 -25 0 25 50 75 100 125 150 ON resistance vs Temperature 2.5 2.0 1.5 1.0 0.5 0.0 -50 -25 Threshold Voltage vs Temperature 25 50 75 100 125 150 Maximum Safe Operating Area 1000 1.2 1.1 ID, Drain Current (A) VGS(TH), Threshold Voltage (Normalized) 0 TJ, Junction Temperature (°C) TJ, Junction Temperature (°C) 1.0 0.9 0.8 0.7 100 us limited by RDSon 100 1 ms 10 Single pulse TJ=150°C TC=25°C 10 ms 100 ms 1 0.6 1 -50 -25 0 25 50 75 100 125 150 TC, Case Temperature (°C) Ciss 10000 Coss 1000 Crss 100 10 0 10 20 30 40 VDS, Drain to Source Voltage (V) 10 100 1000 VDS, Drain to Source Voltage (V) Gate Charge vs Gate to Source Voltage VGS, Gate to Source Voltage (V) Capacitance vs Drain to Source Voltage 100000 C, Capacitance (pF) VGS=10V ID=49.5A 14 ID=99A TJ=25°C 12 VDS=100V VDS=250V 10 50 VDS=400V 8 6 4 2 0 0 50 100 150 200 250 300 350 Gate Charge (nC) www.microsemi.com 5–7 APTM50AM35FTG – Rev 3 October, 2012 BVDSS, Drain to Source Breakdown Voltage (Normalized) Breakdown Voltage vs Temperature RDS(on), Drain to Source ON resistance (Normalized) APTM50AM35FTG APTM50AM35FTG Rise and Fall times vs Current 160 70 140 td(off) VDS=333V RG=1Ω TJ=125°C L=100µH 60 50 40 30 VDS=333V RG=1Ω TJ=125°C L=100µH 120 tr and tf (ns) td(on) 100 80 tr 60 40 20 20 10 0 0 20 40 60 0 80 100 120 140 160 20 ID, Drain Current (A) 10 VDS=333V RG=1Ω TJ=125°C L=100µH 5 4 Eon 3 Switching Energy (mJ) Switching Energy (mJ) 40 60 80 100 120 140 160 ID, Drain Current (A) Switching Energy vs Gate Resistance Switching Energy vs Current 6 Eoff 2 1 VDS=333V ID=99A TJ=125°C L=100µH 8 6 Eoff Eon 4 Eoff 2 0 0 0 20 40 60 0 80 100 120 140 160 ID, Drain Current (A) Operating Frequency vs Drain Current 350 ZVS 300 250 IDR, Reverse Drain Current (A) 400 VDS=333V D=50% RG=1Ω TJ=125°C TC=75°C 200 ZCS 150 Hard switching 100 50 0 10 20 5 10 15 20 25 Gate Resistance (Ohms) 450 Frequency (kHz) tf 30 40 50 60 70 ID, Drain Current (A) 80 Source to Drain Diode Forward Voltage 1000 100 TJ=150°C TJ=25°C 10 90 www.microsemi.com 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 VSD, Source to Drain Voltage (V) 6–7 APTM50AM35FTG – Rev 3 October, 2012 td(on) and td(off) (ns) Delay Times vs Current 80 APTM50AM35FTG DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. www.microsemi.com 7–7 APTM50AM35FTG – Rev 3 October, 2012 Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part.