APTM50DDAM65T3G
Dual Boost chopper
MOSFET Power Module
Application
AC and DC motor control
Switched Mode Power Supplies
Power Factor Correction
13 14
CR1
CR2
22
7
23
8
26
4
27
3
29
15
Features
Power MOS 7® MOSFETs
- Low RDSon
- Low input and Miller capacitance
- Low gate charge
- Avalanche energy rated
- Very rugged
Kelvin source for easy drive
Very low stray inductance
Internal thermistor for temperature monitoring
Q2
Q1
30
31
32
R1
VDSS = 500V
RDSon = 65m typ @ Tj = 25°C
ID = 51A @ Tc = 25°C
16
Benefits
Outstanding performance at high frequency operation
Direct mounting to heatsink (isolated package)
Low junction to case thermal resistance
Solderable terminals both for power and signal for
easy PCB mounting
Low profile
Each leg can be easily paralleled to achieve a single
boost of twice the current capability
RoHS Compliant
All multiple inputs and outputs must be shorted together
Example: 13/14 ; 29/30 ; 22/23 …
All ratings @ Tj = 25°C unless otherwise specified
Absolute maximum ratings (per MOSFET)
IDM
VGS
RDSon
PD
IAR
EAR
EAS
Tc = 25°C
Tc = 80°C
Continuous Drain Current
Pulsed Drain current
Gate - Source Voltage
Drain - Source ON Resistance
Power Dissipation
Avalanche current (repetitive and non repetitive)
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
Tc = 25°C
Max ratings
500
51
38
204
±30
78
390
51
50
3000
Unit
V
December, 2017
ID
Parameter
Drain - Source Voltage
A
V
m
W
A
mJ
These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
www.microsemi.com
1–7
APTM50DDAM65T3G – Rev 3
Symbol
VDSS
APTM50DDAM65T3G
Electrical Characteristics (per MOSFET)
Symbol
IDSS
RDS(on)
VGS(th)
IGSS
Characteristic
Zero Gate Voltage Drain Current
Drain – Source on Resistance
Gate Threshold Voltage
Gate – Source Leakage Current
Test Conditions
VGS = 0V,VDS = 500V
VGS = 10V, ID = 25.5A
VGS = VDS, ID = 2.5mA
VGS = ±30 V, VDS = 0V
Min
Typ
65
3
Max
100
78
5
±150
Unit
µA
m
V
nA
Max
Unit
Dynamic Characteristics (per MOSFET)
Symbol
Ciss
Coss
Crss
Characteristic
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Qg
Total gate Charge
Qgs
Gate – Source Charge
Qgd
Gate – Drain Charge
Td(on)
Turn-on Delay Time
Tr
Td(off)
Rise Time
Turn-off Delay Time
Tf
Fall Time
Eon
Turn-on Switching Energy
Eoff
Turn-off Switching Energy
Eon
Turn-on Switching Energy
Eoff
Turn-off Switching Energy
RthJC
Junction to Case Thermal Resistance
Test Conditions
VGS = 0V
VDS = 25V
f = 1MHz
Min
Typ
7000
1400
90
pF
140
VGS = 10V
VBus = 250V
ID = 51A
40
nC
70
Inductive switching @ 125°C
VGS = 15V
VBus = 333V
ID = 51A
RG = 3
21
Inductive switching @ 25°C
VGS = 15V, VBus = 333V
ID = 51A, RG = 3Ω
1035
Inductive switching @ 125°C
VGS = 15V, VBus = 333V
ID = 51A, RG = 3Ω
1556
38
ns
75
93
µJ
845
µJ
1013
0.32
°C/W
Max
600
350
Unit
V
µA
A
Chopper Diode ratings and characteristics (per diode)
Test Conditions
Typ
VR=600V
VF
Diode Forward Voltage
IF = 80A
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IF = 80A
VR = 300V
di/dt = 4500A/µs
RthJC
Min
Tc = 40°C
Tj = 25°C
Tj = 125°C
80
1.45
1.35
Tj = 25°C
95
Tj = 125°C
Tj = 25°C
Tj = 125°C
115
5.2
8
Junction to Case Thermal Resistance
V
ns
µC
0.8
www.microsemi.com
December, 2017
Characteristic
Peak Repetitive Reverse Voltage
Reverse Leakage Current
DC Forward Current
°C/W
2–7
APTM50DDAM65T3G – Rev 3
Symbol
VRRM
IRM
IF
APTM50DDAM65T3G
Thermal and package characteristics
Symbol
VISOL
TJ
TJOP
TSTG
TC
Torque
Wt
Characteristic
RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz
Operating junction temperature range
Recommended junction temperature under switching conditions
Storage Temperature Range
Operating Case Temperature
Mounting torque
To heatsink
M4
Package Weight
Min
4000
-40
-40
-40
-40
2
Max
150
TJmax - 25
125
125
3
110
Unit
V
°C
N.m
g
Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information).
Symbol
R25
∆R25/R25
B25/85
∆B/B
Characteristic
Resistance @ 25°C
Min
T25 = 298.15 K
TC=100°C
RT
R25
Typ
50
5
3952
4
Max
Unit
k
%
K
%
T: Thermistor temperature
1 1 RT: Thermistor value at T
exp B25 / 85
T25 T
See application note 1906 - Mounting Instructions for SP3F Power Modules on www.microsemi.com
www.microsemi.com
3–7
APTM50DDAM65T3G – Rev 3
December, 2017
Package outline (dimensions in mm)
APTM50DDAM65T3G
Typical Performance Curve
Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration
Thermal Impedance (°C/W)
0.35
0.3
0.9
0.25
0.7
0.2
0.5
0.15
0.3
0.1
0.1
0.05
Single Pulse
0.05
0
0.00001
0.0001
0.001
0.01
0.1
1
10
rectangular Pulse Duration (Seconds)
Low Voltage Output Characteristics
ID, Drain Current (A)
VGS=10&15V
160
7V
120
6.5V
80
6V
40
5.5V
0
100
5V
0
5
10
15
20
VDS, Drain to Source Voltage (V)
75
TJ=25°C
50
25
TJ=125°C
TJ=-55°C
0
0
25
2
4
6
8
VGS, Gate to Source Voltage (V)
DC Drain Current vs Case Temperature
RDS(on) vs Drain Current
1.1
VDS > ID(on)xRDS(on)MAX
250µs pulse test @ < 0.5 duty cycle
125
60
1.05
VGS=10V
1
VGS=20V
0.95
0.9
50
40
30
20
10
10
20
30
40
50
60
ID, Drain Current (A)
www.microsemi.com
25
50
75
100
125
TC, Case Temperature (°C)
December, 2017
0
0
150
4–7
APTM50DDAM65T3G – Rev 3
Normalized to
VGS=10V @ 25.5A
ID, DC Drain Current (A)
ID, Drain Current (A)
8V
RDS(on) Drain to Source ON Resistance
Transfert Characteristics
150
200
1.2
1.1
1.0
0.9
0.8
0.7
-50 -25
0
25
50
75 100 125 150
ON resistance vs Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-50 -25
Threshold Voltage vs Temperature
25
50
75 100 125 150
Maximum Safe Operating Area
1000
1.2
1.1
ID, Drain Current (A)
1.0
0.9
0.8
0.7
100 us
limited by RDSon
100
1 ms
10
10 ms
Single pulse
TJ=150°C
TC=25°C
1
100 ms
0.1
0.6
1
-50 -25 0 25 50 75 100 125 150
TC, Case Temperature (°C)
Ciss
10000
Coss
1000
Crss
100
10
0
10
20
30
40
VDS, Drain to Source Voltage (V)
Gate Charge vs Gate to Source Voltage
VGS, Gate to Source Voltage (V)
Capacitance vs Drain to Source Voltage
100000
10
100
1000
VDS, Drain to Source Voltage (V)
50
14
VDS=100V
ID=51A
TJ=25°C
12
VDS=250V
10
VDS=400V
8
6
4
2
0
0
25
50
75
100 125 150 175
December, 2017
VGS(TH), Threshold Voltage
(Normalized)
0
TJ, Junction Temperature (°C)
TJ, Junction Temperature (°C)
C, Capacitance (pF)
VGS=10V
ID= 25.5A
Gate Charge (nC)
www.microsemi.com
5–7
APTM50DDAM65T3G – Rev 3
BVDSS, Drain to Source Breakdown
Voltage (Normalized)
Breakdown Voltage vs Temperature
RDS(on), Drain to Source ON resistance
(Normalized)
APTM50DDAM65T3G
APTM50DDAM65T3G
Rise and Fall times vs Current
160
70
140
td(off)
VDS=333V
RG=3Ω
TJ=125°C
L=100µH
60
50
40
30
VDS=333V
RG=3Ω
TJ=125°C
L=100µH
120
tr and tf (ns)
td(on)
100
80
tr
60
40
20
20
10
0
10
20
30
40
50
60
70
80
10
20
ID, Drain Current (A)
70
80
5
VDS=333V
RG=3Ω
TJ=125°C
L=100µH
2.5
2
Switching Energy (mJ)
Eon
1.5
Eoff
1
0.5
VDS=333V
ID=51A
TJ=125°C
L=100µH
4
3
Eoff
Eon
2
Eoff
1
0
0
10
20
30
40
50
60
70
0
80
5
10 15 20 25 30 35 40 45
ID, Drain Current (A)
Gate Resistance (Ohms)
Operating Frequency vs Drain Current
400
350
ZVS
300
250
IDR, Reverse Drain Current (A)
450
VDS=333V
D=50%
RG=3Ω
TJ=125°C
TC=75°C
200
ZCS
150
100
hard
switching
50
0
10
15
20 25 30 35
ID, Drain Current (A)
40
Source to Drain Diode Forward Voltage
1000
100
45
TJ=150°C
TJ=25°C
10
1
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
December, 2017
Switching Energy (mJ)
30 40
50 60
ID, Drain Current (A)
Switching Energy vs Gate Resistance
Switching Energy vs Current
3
Frequency (kHz)
tf
VSD, Source to Drain Voltage (V)
www.microsemi.com
6–7
APTM50DDAM65T3G – Rev 3
td(on) and td(off) (ns)
Delay Times vs Current
80
APTM50DDAM65T3G
DISCLAIMER
The information contained in the document (unless it is publicly available on the Web without access restrictions) is
PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted,
transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the
recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement
will also apply. This document and the information contained herein may not be modified, by any person other than
authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property
right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication,
inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by
Microsemi in writing signed by an officer of Microsemi.
Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime
without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi
disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or
warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other
intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or
user must conduct and complete all performance and other testing of this product as well as any user or customers final
application. User or customer shall not rely on any data and performance specifications or parameters provided by
Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi
product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all
faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims
any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product
is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp
Life Support Application
Seller's Products are not designed, intended, or authorized for use as components in systems intended for space,
aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other
application in which the failure of the Seller's Product could create a situation where personal injury, death or property
damage or loss may occur (collectively "Life Support Applications").
Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive
testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees,
subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and
expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage
or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations
that Seller was negligent regarding the design or manufacture of the goods.
www.microsemi.com
7–7
APTM50DDAM65T3G – Rev 3
December, 2017
Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with
Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the
new proposed specific part.
