ATSAM4SA16BA-ANR

32-bit MCUs SAM4S Microcontroller Family Scalable Performance, Memory Density and Power Efficiency Based on the powerful ARM® Cortex®-M4 processor, the SAM4S series extends the Microchip Cortex-M-based microcontroller (MCU) portfolio to offer: • Increased performance and power efficiency • Higher memory densities up to 2 MB of Flash and 160 KB of SRAM • Rich peripheral set for connectivity, system control and analog interfacing. The SAM4S series offers pin-to-pin compatibility with SAM4N, SAM3S, SAM3N and SAM7S devices, facilitating easy migration within the portfolio. Memory SAM4S Flash 128 KB/256 KB/ 512 KB/1 MB/2 MB Optional Dual-Bank Cortex -M4 120 MHz SRAM 64 KB/128 KB/160 KB MPU ® External Bus Interface BootROM 2 KB Cache Connectivity 4-layer AHB Matrix FS USB Device 21 ch DMA HS SDIO/SD/MMC Package Options 64-pin QFP/64-pin QFN/ 100-pin QFP/ 100-pin BGA/ 100-pin VFBG 3 SPI, 2 I2C, I2S 2 USA RT, 2 UA RT System 1.8V Regulator POR, BOD 2 Xtal OSC, 2 RC OSC, 2 PLL WDT, RTT, RTC CRC Unit Control 16 ch 12-bit ADC 2 ch 12-bit DAC Temperature Sensor Analog Comparator 4 x 16-bit PWM 6 x 16-bit Timers up to 79 IOs Key Features Improved Performance Level Built around the ARM Cortex-M4 core, the SAM4S operates at 120 MHz and integrates the Flash read accelerator and optional cache memory to increase system performance. The SAM4S features a multi-layer bus matrix, multi-channel direct memory access (DMA) and distributed memory to support high data rate communication. Low Power Consumption The SAM4S series achieves 180 µA/MHz in dynamic mode and 1 µA at 1.8V in back-up mode with the Real-Time Clock (RTC) running. Offering some of the best power consumption/performance rates on the market for standby mode, the SAM4S series reaches 120 MHz operating frequency with a RAM retention mode below 25 µA. Safety and Security Integrated best-in-class hardware code protection: • Prevents access to on-chip memory to protect your intellectual property • Supports secure device reconditioning (chip erase) for reprogramming • A unique 128-bit ID and scrambled external bus interface ensure software confidentiality while the hardware CRC checks memory integrity www.microchip.com/32bit Microchip QTouch® Capacitive Touch Support The SAM4S series is touch-ready, offering native support for Microchip's market-leading QTouch technology so you can easily implement buttons, sliders and wheels in your application. Ease of Use Accelerate your development cycle with Atmel Studio, a seamless, easy-to-use Integrated Development Environment (IDE). Get a jump-start on your design with dedicated evaluation kits and software packages. For rapid evaluation and code development, Microchip and industry-leading third parties provide a full range of development tools, Real-Time Operating System (RTOS), middleware and support services to reduce time to market. Application Areas • • • • • • • Consumer goods and toys Industrial control Metering Medical Test and measurement 802.15.4 wireless networking PC, cell phone and gaming peripherals Design Tools and Ecosystem Microchip offers a full suite of hardware tools for evaluation and prototyping with the SAM4S devices. All SAM4S evaluation tools are supported by Atmel Studio IDE and integrate QTouch library support for buttons, wheels and sliders. They are backed by a worldwide support ecosystem of industry-leading suppliers of development tools, real-time operating systems and middleware products to make your design process easier and reduce time to market. SAM4S Xplained Pro SAM4S-EK2 The Xplained Pro platform consist of a main board with multiple expansion ports plus extension boards, including OLED LCD displays, buttons, sensors and more. The board is available standalone or as part of a starter kit. The extension boards can also be purchased separately. A full-featured board to quickly evaluate and develop code for applications running on Microchip SAM4S microcontrollers. Evaluation Kit: ATSAM4S-XPRO ATSAM4S-EK2 Starter Kit: ATSAM4S-XSTK SAM4S Xplained SAM4S Wireless PIR Reference Design Kit The Xplained platform is for early evaluation of the capabilities offered by the SAM4S MCU which contains QTouch button sensors, LEDs, a USB port. The Xplained expansion headers provide easy access to analog and digital I/O pins. The board is powered by the USB cable and integrates a JTAG emulator with USB interface for programming and debugging. The SAM4S-WPIR-RD Reference Design Kit is based on the SAM4S16C device. Thanks to this reference design, you will be able to develop your own PIR motion detector camera. ATSAM4S-XPLD ATSAM4S-WPIR-RD SAM4S Ordering Information Part Number Flash SRAM Cache Package Part Number Flash SRAM Cache Package ATSAM4SD32CA-CFU 100-pin VFBGA ATSAM4S8CA-CFU 100-pin VFBGA ATSAM4SD32CA-CU 100-pin TFBGA ATSAM4S8CA-CU 100-pin TFBGA 100-pin LQFP ATSAM4S8CA-AU 64-pin LQFP ATSAM4S8BA-AU ATSAM4SD32BA-MU 64-pin QFN ATSAM4S8BA-MU 64-pin QFN ATSAM4SD16CA-CFU 100-pin VFBGA ATSAM4S8BA-UUR 64-pin WLCSP 100-pin TFBGA ATSAM4S4CA-CFU 100-pin VFBGA 100-pin LQFP ATSAM4S4CA-CU 100-pin TFBGA 64-pin LQFP ATSAM4S4CA-AU 100-pin LQFP ATSAM4SD16BA-MU 64-pin QFN ATSAM4S4BA-AU ATSAM4SA16CA-CFU 100-pin VFBGA ATSAM4S4BA-MU ATSAM4SA16CA-CU 100-pin TFBGA ATSAM4S4BA-UUR ATSAM4SD32CA-AU ATSAM4SD32BA-AU ATSAM4SD16CA-CU ATSAM4SD16CA-AU ATSAM4SD16BA-AU 2 x 1 MB Dual-bank 2 x 512 KB Dual-bank 160 KB 2 KB 2 KB 512 KB 256 KB 128 KB 64 KB – – 100-pin LQFP 64-pin LQFP 64-pin LQFP 64-pin QFN 64-pin WLCSP 100-pin LQFP ATSAM4S4AA-AU 64-pin LQFP ATSAM4S4AA-MU 48-pin QFN ATSAM4SA16BA-MU 64-pin QFN ATSAM4S2CA-CFU 100-pin VFBGA ATSAM4S16CA-CFU 100-pin VFBGA ATSAM4S2CA-CU 100-pin TFBGA ATSAM4S16CA-CU 100-pin TFBGA ATSAM4S2CA-AU 100-pin LQFP ATSAM4S16CA-AU 100-pin LQFP ATSAM4S2BA-AU 1 MB 160 KB 2 KB ATSAM4SA16BA-AU ATSAM4SA16CA-AU 1 MB 160 KB 128 KB – 64-pin LQFP ATSAM4S2BA-MU ATSAM4S16BA-MU 64-pin QFN ATSAM4S2BA-UUR ATSAM4S16BA-UUR 64-pin WLCSP ATSAM4S16BA-AU 48-pin LQFP 128 KB 64 KB – 64-pin LQFP 64-pin QFN 64-pin WLCSP ATSAM4S2AA-AU 48-pin LQFP ATSAM4S2AA-MU 48-pin QFN The QFP package has a –40°C to 105°C option. Also available upon request for any other package type. To order: replace the final letter ‘U’ by an ‘N’ (ex: ATSAM4S16CA-AN). The Microchip name and logo, the Microchip logo and QTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and other countries. All other trademarks mentioned herein are property of their respective companies. © 2017, Microchip Technology Incorporated. All Rights Reserved. 7/17 DS60001419B www.microchip.com/32bit