CDLL4135C/TR

1N4614UR-1 – 1N4627UR-1e3, 1N4099UR-1 – 1N4135UR-1e3 Available on commercial versions Qualified Levels: JAN, JANTX, JANTXV and JANS 500 mW Metallurgically Bonded Glass Surface Mount Zener Diodes Qualified per MIL-PRF-19500/435 DESCRIPTION The 1N4099UR-1 through 1N4135UR-1 and 1N4614UR-1 through 1N4627UR-1 series are 500 mW, Zener voltage regulators in the surface mount, glass DO-213AA package. Voltages from 1.8 to 100V in 5%, 2%, and 1% tolerances are available. They are constructed with an internal metallurgical bond and are mil-qualified up to the JANS level for high reliability applications. DO-213AA Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • Surface mount equivalent to JEDEC registered 1N4099 through 1N4135 and 1N4614 through 1N4627 series. Internal metallurgical bond. Max noise density 40 μV / √Hz for 6.8 V and up. Falls quickly to 1 μV / √Hz at lower voltages. JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435. This series is also available commercially with the CDLL prefix (CDLL4099-1 – CDLL4135-1 and CDLL4614-1 – CDLL4627-1). This CDLL prefix also replaces the MLL prefix on prior devices. RoHS compliant versions available (commercial grade only). Also available in: DO-35 package (axial-leaded) 1N4099-1 – 1N4135-1 and 1N4614-1 – 1N4627-1 DO-216 package (tabbed surface mount) 1PMT4099 – 1PMT4135 and 1PMT4614 – 1PMT4627 APPLICATIONS / BENEFITS • • • • • • • Regulates voltage over broad ranges of current and temperature. Extensive selection from 1.8 to 100 volts. Voltage tolerances of 5% (standard), 2% and 1% are available. Hermetically sealed surface mount package. Non-sensitive to ESD per MIL-STD-750 method 1020. Minimal capacitance (see Figure 3). Inherently radiation hard as described in Microsemi MicroNote 050. MAXIMUM RATINGS @ T C = +25 ºC unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-End Cap (2) Rated Average Power Dissipation Forward Voltage @ 200 mA Solder Temperature @ 10 s Symbol Value T J and T STG R ӨJA R ӨJEC P M(AV) VF -65 to +175 300 100 0.5 1.1 260 Unit o C o C/W o C/W W V o C Notes: 1. When mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page). 2. The 0.5 W linearly derates starting at T EC = 125 °C and goes to zero at 175 °C. For ambient T A condition on a typical PC board, it linearly derates from 500 mW starting at 25 °C and goes to zero at 175 °C (see Figure 2). T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 6 1N4614UR-1 – 1N4627UR-1e3, 1N4099UR-1 – 1N4135UR-1e3 MECHANICAL and PACKAGING • • • • • • • CASE: Hermetically sealed glass DO-213AA (SOD80 or CDLL34) MELF style package. TERMINALS: Tin-lead or RoHS compliant annealed matte-tin (on commercial grade only) plating. Solderable per MIL-STD-750, method 2026. POLARITY: Cathode indicated by banded end. Diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation. MARKING: Cathode band only. TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape (add “TR” suffix to part number). Consult factory for quantities. WEIGHT: Approximately 0.04 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N4099 C UR -1 (e3) Reliability Level JAN = JAN level JANTX = JANTX level JANTXV = JANTXV level JANS = JANS level Blank = Commercial RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant Metallurgically Bonded JEDEC type number (See Electrical Characteristics table) Surface Mount Package Zener Voltage Tolerance Blank = 5% C = 2% D = 1% CDLL 4099 C -1 Microsemi Designation (e3) RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant JEDEC type number (See Electrical Characteristics table) Metallurgically Bonded Zener Voltage Tolerance Blank = 5% C = 2% D = 1% T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 2 of 6 1N4614UR-1 – 1N4627UR-1e3, 1N4099UR-1 – 1N4135UR-1e3 SYMBOLS & DEFINITIONS Definition Symbol α VZ IR I Z , I ZT , I ZK I ZM ND VR VZ Z ZT or Z ZK Temperature Coefficient of Regulator Voltage: The change in regulator voltage divided by the change in temperature that caused it expressed in %/C or mV/°C. Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z ), at a specified test point (I ZT ), near breakdown knee (I ZK ). Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Noise Density: The noise generated over a specified frequency bandwidth usually specified in terms of mV/ √Hz. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z ) in its breakdown region. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 3 of 6 1N4614UR-1 – 1N4627UR-1e3, 1N4099UR-1 – 1N4135UR-1e3 ELECTRICAL CHARACTERISTICS @ 25 °C unless otherwise stated INDUSTRY PART NUMBER (Note 1) 1N4614UR-1 1N4615UR-1 1N4616UR-1 1N4617UR-1 1N4618UR-1 1N4619UR-1 1N4620UR-1 1N4621UR-1 1N4622UR-1 1N4623UR-1 1N4624UR-1 1N4625UR-1 1N4626UR-1 1N4627UR-1 1N4099UR-1 1N4100UR-1 1N4101UR-1 1N4102UR-1 1N4103UR-1 1N4104UR-1 1N4105UR-1 1N4106UR-1 1N4107UR-1 1N4108UR-1 1N4109UR-1 1N4110UR-1 1N4111UR-1 1N4112UR-1 1N4113UR-1 1N4114UR-1 1N4115UR-1 1N4116UR-1 1N4117UR-1 1N4118UR-1 1N4119UR-1 1N4120UR-1 1N4121UR-1 1N4122UR-1 1N4123UR-1 1N4124UR-1 1N4125UR-1 1N4126UR-1 1N4127UR-1 1N4128UR-1 1N4129UR-1 1N4130UR-1 1N4131UR-1 1N4132UR-1 1N4133UR-1 1N4134UR-1 1N4135UR-1 MICROSEMI PART NUMBER (Note 1) CDLL4614-1 CDLL4615-1 CDLL4616-1 CDLL4617-1 CDLL4618-1 CDLL4619-1 CDLL4620-1 CDLL4621-1 CDLL4622-1 CDLL4623-1 CDLL4624-1 CDLL4625-1 CDLL4626-1 CDLL4627-1 CDLL4099-1 CDLL4100-1 CDLL4101-1 CDLL4102-1 CDLL4103-1 CDLL4104-1 CDLL4105-1 CDLL4106-1 CDLL4107-1 CDLL4108-1 CDLL4109-1 CDLL4110-1 CDLL4111-1 CDLL4112-1 CDLL4113-1 CDLL4114-1 CDLL4115-1 CDLL4116-1 CDLL4117-1 CDLL4118-1 CDLL4119-1 CDLL4120-1 CDLL4121-1 CDLL4122-1 CDLL4123-1 CDLL4124-1 CDLL4125-1 CDLL4126-1 CDLL4127-1 CDLL4128-1 CDLL4129-1 CDLL4130-1 CDLL4131-1 CDLL4132-1 CDLL4133-1 CDLL4134-1 CDLL4135-1 NOMINAL ZENER VOLTAGE ZENER TEST CURRENT V Z @ I ZT I ZT (Note 2) Volts 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.1 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 25.0 27.0 28.0 30.0 33.0 36.0 39.0 43.0 47.0 51.0 56.0 60.0 62.0 68.0 75.0 82.0 87.0 91.0 100.0 MAXIMUM ZENER IMPEDANCE MAXIMUM REVERSE CURRENT MAXIMUM NOISE DENSITY MAXIMUM ZENER CURRENT Z ZT IR @ VR N D @ I ZT I ZM µV/√Hz 1 1 1 1 1 1 1 1 1 1 1 2 4 5 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 mA 120.0 110.0 100.0 95.0 90.0 87.0 85.0 83.0 80.0 77.0 75.0 70.0 65.0 61.0 56.0 51.0 46.0 44.0 42.0 38.0 35.0 32.0 29.0 27.0 25.0 24.0 22.0 21.0 20.0 19.0 17.0 16.0 15.0 14.0 14.0 13.0 12.0 11.0 9.8 8.9 8.1 7.5 6.7 6.4 6.1 5.6 5.1 4.6 4.4 4.2 3.8 (Note 3) µA 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Ohms 1200 1250 1300 1400 1500 1600 1650 1700 1650 1600 1550 1500 1400 1200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 150 150 150 150 150 150 200 200 200 200 200 250 250 300 300 400 500 700 700 800 1000 1200 1600 µA 3.5 2.5 2.0 1.0 0.5 0.4 3.5 3.5 2.5 2.0 5.0 5.0 5.0 5.0 1.0 1.0 0.5 0.5 0.5 0.5 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Volts 1.0 1.0 1.0 1.0 1.0 1.0 1.5 2.0 2.0 2.0 3.0 3.0 4.0 5.0 5.2 5.7 6.3 6.7 7.0 7.6 8.5 9.2 9.9 10.7 11.4 12.2 13.0 13.7 14.5 15.2 16.8 18.3 19.0 20.5 21.3 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 45.6 47.1 51.7 57.0 62.4 66.2 69.2 76.0 MAXIMUM TEMP.COEFF. OF ZENER VOLTAGE α VZ %/oC -0.075 -0.075 -0.075 -0.075 -0.075 -0.075 -0.075 -0.065 -0.060 -0.050 -0.050,+0.020 -0.045,+0.030 -0.020,+0.040 -0.010,+0.050 +0.060 +0.065 +0.070 +0.075 +0.080 +0.080 +0.080 +0.080 +0.080 +0.085 +0.085 +0.085 +0.090 +0.090 +0.090 +0.090 +0.090 +0.090 +0.090 +0.090 +0.095 +0.095 +0.095 +0.095 +0.095 +0.095 +0.095 +0.100 +0.100 +0.100 +0.100 +0.100 +0.100 +0.100 +0.100 +0.100 +0.100 SEE NOTES ON NEXT PAGE. T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 4 of 6 1N4614UR-1 – 1N4627UR-1e3, 1N4099UR-1 – 1N4135UR-1e3 NOTE 1: These may be ordered as either 1N4614UR-1 thru 1N4627UR-1 and 1N4099UR-1 thru 1N4135UR-1 or CDLL4614-1 thru CDLL4627-1 and CDLL4099-1 thru CDLL4135-1. For 1N military types, add the JAN, JANTX, JANTXV prefix for required screening to the industry part number. NOTE 2: The JEDEC type numbers shown above have a standard tolerance of +/-5% on the nominal Zener voltage. V Z is measured with the diode in thermal equilibrium (still air) at 25 oC for end-cap terminations. NOTE 3: Zener impedance is derived by superimposing on I ZT a 60 Hz rms ac current at 10% of I ZT . See MicroNote 202 for Z ZT variation with I Z . Pd Rated Power Dissipation (mW) GRAPHS o Temperature ( C) FIGURE 2 – Power Derating Curve FIGURE 1 – Noise Density Measurement Circuit Typical Capacitance in Picofarads (pF) Noise density, (N D ) is specified in microvolt-rms per square-root-hertz. Actual measurement is performed using a 1 KHz to 3 KHz frequency bandpass filter at a constant Zener test current (I ZT ) at 25 oC ambient temperature. N D is calculated from the formula. Zener Voltage V Z FIGURE 3 – Capacitance vs. Zener Voltage (Typical) T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 5 of 6 1N4614UR-1 – 1N4627UR-1e3, 1N4099UR-1 – 1N4135UR-1e3 PACKAGE DIMENSIONS DIM BD BL ECT S INCH MIN MAX 0.063 0.067 0.130 0.146 0.016 0.022 0.001 min MILLIMETERS MIN MAX 1.60 1.70 3.30 3.71 0.41 0.56 0.03 min PAD LAYOUT A B C T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation INCH 0.200 0.055 0.080 mm 5.08 1.40 2.03 Page 6 of 6