CL220N5-G

CL220 Simple, 220V, 20mA, Temperature-Compensated, Constant-Current, LED Driver IC Features Description • • • • CL220 is a high voltage, temperature-compensated, 20mA constant current regulator. The device operates at up to 220V, and is accurate to ±10% over a 5 - 160V range. The device can be used as a two-terminal, constant-current source or a constant-current sink. 5.0 to 220V operating range (VA-B) 20mA ±10% at 5.0 - 160V 0.01% / °C typical temperature coefficient Packages Types: - TO-252 (D-PAK) - TO-220 • Can be paralleled for higher current Applications • • • • • Industrial lamp indicators Signage Accent lighting Constant current source Constant current sink  2015 Microchip Technology Inc. A typical application for CL220 is to drive LEDs with a constant current of 20mA. Multiple CL220s can also be used in parallel to provide higher currents such as 40mA, 60mA, 80mA, and so on. The device is available in the TO-252 (D-PAK) and TO-220 packages. DS20005413A-page 1 CL220 Package Type VB VB NC VA NC VA VB TO-220 TO-252 (D-PAK) See Table 2-1 for pin information Typical Application Circuit VA Functional Circuit Diagram CL220 Up to 220V + VLED(TOTAL) 10nF VA Control Circuit and Temperature Compensation VB + ILED 20mA VLED(TOTAL) VB – Functional Circuit Diagram VA Control Circuit and Temperature Compensation VA 20mA VB DS20005413A-page 2 Equivalent Block Diagram VB  2015 Microchip Technology Inc. CL220 1.0 ELECTRICAL CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS† Operating voltage, VA-B .................................................................................................................................................................. 240V Operating junction temperature, TJ .............................................................................................................................. -40°C to +125°C Storage temperature, TS .............................................................................................................................................. -55°C to +150°C † Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. TABLE 1-1: ELECTRICAL CHARACTERISTICS Electrical Specifications: Unless otherwise specified, for all specifications TJ = +25°C Symbol VA-B ∆IA-B/∆T RA-B IAB Parameter Min Typ Max Operating voltage 5.0 - 220 V IA-B temperature coefficient - 0.01 - %/°C Dynamic resistance - 300 - kΩ 18 20 22 18 - 25 - - 22 - 25 - Output current Units Conditions VA-B= 45V, Tj= -40°C to +100°C (Note 1) VAB= 4.0 - 160V mA VAB= 160 - 220V (Fig. 4) VAB= 0 - 4.0V IOS Turn-on overshoot current tOS mA VT= 45V (Fig. 5) (Note 1) Overshoot duration - 1 - µs VT= 45V (Fig. 5) (Note 1) tDLY Turn-on delay - 10 - µs VT= 45V (Fig. 5) (Note 1) tRISE Turn-on rise time - 200 - ns VT= 45V (Fig. 5) (Note 1) Note 1: Obtained by Characterization; Not 100% tested in production. TABLE 1-2: THERMAL RESISTANCE, JUNCTION TO AMBIENT θja Package Units Min Typ Max TO-252 (D-PAK) – 81 – °C/W TO-220 – 29 – °C/W Conditions Soldered to 2.0 cm2 copper area exposed to free air (Note 1) Note 1: Obtained by Characterization; Not 100% tested in production. 2.0 PIN DESCRIPTION The locations of the pins are shown in Package Type and Packaging Information. TABLE 2-1: PIN DESCRIPTION Pin # TO-252 Pin # TO-220 Function Description 1 1 VA Current flows into this pin 4 2, 4 VB Current flows out of this pin 3 3 NC No connection  2015 Microchip Technology Inc. DS20005413A-page 3 CL220 3.0 APPLICATION INFORMATION Figures 3-1- 3-6 show the characteristics and timing for CL220. 1.02 Current, normalized to 25°C 5V 45V 1.01 90V 1.00 0.99 0.98 -55 -35 -15 5 25 45 65 85 105 125 145 Junction Temperature (°C) FIGURE 3-1: Temperature Characteristics 30 25 IA-B (mA) 20 15 10 5 scale change 0 0 5 10 15 20 60 100 140 180 220 VA-B (V) FIGURE 3-2: DS20005413A-page 4 Output Characteristics  2015 Microchip Technology Inc. CL220 VT VA-B 0V tDLY tRISE tOS Turn-on overshoot due to start-up characteristics of internal circuitry IOS 100% 90% IA-B 10% 0mA Inrush spike due to charging of parasitic capacitances and dV/dt CDG feed-thru FIGURE 3-3: Timing Diagram VT IA-B 1.0µF film CL220 FIGURE 3-4: Timing Test Circuit VA CL220 Up to 220V +VLED(TOTAL) VA CL220 VA VA CL220 CL220 10nF VB VB VB VB + ILED 20mA ILED 20mA ILED 20mA ILED 20mA VLED(TOTAL) – FIGURE 3-5: CL220 for Multiple LED Strings  2015 Microchip Technology Inc. DS20005413A-page 5 CL220 VA CL220 Up to 220V +VLED(TOTAL) 10nF VB VA VA CL220 CL220 VB VB + ILED 60mA VLED(TOTAL) – FIGURE 3-6: 3.1 CL220 for Higher Current Functional Circuit and Block Diagram VA Control Circuit and Temperature Compensation VB FIGURE 3-7: Functional Circuit Diagram VA 20mA VB FIGURE 3-8: Block Diagram (Equivalent Functional Circuit) DS20005413A-page 6  2015 Microchip Technology Inc. CL220 4.0 PACKAGING INFORMATION 4.1 Package Marking Information TO-252 (D-PAK) Example XXXX XXXXX e3 YYWWNNN CL 220K4 e3 1522343 3-lead TO-220 XXXXXXXXX e3 XXXXXXX YYWWNNN Legend: XX...X Y YY WW NNN e3 * Note: Example CL220N5 e3 1522343 Product Code or Customer-specific information Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week ‘01’) Alphanumeric traceability code Pb-free JEDEC® designator for Matte Tin (Sn) This package is Pb-free. The Pb-free JEDEC designator ( e3 ) can be found on the outer packaging for this package. In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for product code or customer-specific information. Package may or not include the corporate logo.  2015 Microchip Technology Inc. DS20005413A-page 7 CL220 Note: For the most current package drawings, see the Microchip Packaging Specification at www.microchip.com/packaging. DS20005413A-page 8  2015 Microchip Technology Inc. CL220 3-Lead TO-220 Package Outline (N5) A E2 E Seating Plane A1 A ΦP Thermal Pad E Q H1 4 D2 D D1 Chamfer Optional 1 3 2 E1 L View B A2 c e Front View A Side View 1 View A - A 3 2 L1 b b2 View B Note: For the most current package drawings, see the Microchip Packaging Specification at www.microchip.com/packaging. Symbol Dimension (inches) A A1 A2 b b2 c D D1 D2 E E1 E2 MIN .140 .020 .080 .015 .045 .012† .560 .326† .474† .380 .270 0.20* NOM - - - .027 .057 - - - - - - - MAX .190 .055 .120 .040 .070 .024 .650 .361 .507 .420 .350 .030 † † e .100 BSC H1 L L1 Q ĭP .230 .500 .200* .100 .139 - - - - - .270 .580 .250 .135 .161 JEDEC Registration TO-220, Variation AB, Issue K, April 2002. 7KLVGLPHQVLRQLVQRWVSHFL¿HGLQWKH-('(&GUDZLQJ ‚7KLVGLPHQVLRQGLIIHUVIURPWKH-('(&GUDZLQJ Drawings not to scale.  2015 Microchip Technology Inc. DS20005413A-page 9 CL220 APPENDIX A: REVISION HISTORY Revision A (July 2015) • Update file to new format DS20005413A-page 10  2015 Microchip Technology Inc. CL220 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. Device - XX X - Package Environmental Options X Media Type Device: CL220 = Simple, 220V, 20 mA, temperature-compensated, constant-current LED driver IC Package: K4 N5 = TO-252 (D-PAK) = TO-220 Environmental G = Lead (Pb)-free/ROHS-compliant package Media Type: (blank) = 2000/Reel for TO-252 = 50/Tube for TO-220  2015 Microchip Technology Inc. Examples: a) CL220K4-G b) CL220N5-G TO-252 package, 2000/reel TO-220 package, 50/Tube DS20005413A-page 11 CL220 Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer, LANCheck, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. The Embedded Control Solutions Company and mTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2015, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. ISBN: 978-1-63277-590-0 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == DS20005413A-page 12 Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.  2015 Microchip Technology Inc. Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Germany - Dusseldorf Tel: 49-2129-3766400 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Hong Kong Tel: 852-2943-5100 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 Austin, TX Tel: 512-257-3370 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Canada - Toronto Tel: 905-673-0699 Fax: 905-673-6509 China - Dongguan Tel: 86-769-8702-9880 China - Hangzhou Tel: 86-571-8792-8115 Fax: 86-571-8792-8116 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Kaohsiung Tel: 886-7-213-7828 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Pforzheim Tel: 49-7231-424750 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy - Venice Tel: 39-049-7625286 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Poland - Warsaw Tel: 48-22-3325737 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 01/27/15 DS20005413A-page 13  2015 Microchip Technology Inc.