DM320006

PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide  2013 Microchip Technology Inc. DS70005147A Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2013, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 978-1-62077-646-9 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == DS70005147A-page 2 Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.  2013 Microchip Technology Inc. PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT USER’S GUIDE Table of Contents Preface ........................................................................................................................... 5 Chapter 1. Introduction 1.1 Kit Contents .................................................................................................. 11 1.2 Starter Kit Functionality and Features .......................................................... 12 Chapter 2. Hardware 2.1 Hardware Features ....................................................................................... 15 Appendix A. Board Layout and Schematics A.1 Block Diagram .............................................................................................. 19 A.2 Board Layout ................................................................................................ 20 A.3 Schematics .................................................................................................. 22 Appendix B. Bill of Materials....................................................................................... 26 Worldwide Sales and Service .................................................................................... 32  2013 Microchip Technology Inc. DS70005147A-page 3 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide NOTES: DS70005147A-page 4  2013 Microchip Technology Inc. PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT USER’S GUIDE Preface NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available. Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document. For the most up-to-date information on development tools, see the MPLAB® IDE online help. Select the Help menu, and then Topics to open a list of available online help files. INTRODUCTION This chapter contains general information that will be useful to know before using the PIC32MZ Embedded Connectivity (EC) Starter Kit. Items discussed in this chapter include: • • • • • • • Document Layout Conventions Used in this Guide Recommended Reading The Microchip Web Site Development Systems Customer Change Notification Service Customer Support Document Revision History DOCUMENT LAYOUT This document describes how to use the PIC32MZ Embedded Connectivity (EC) Starter Kit (also referred to as “starter kit”) as a development tool to emulate and debug firmware on a target board. This user’s guide is composed of the following chapters: • Chapter 1. “Introduction” provides a brief overview of the starter kit, highlighting its features and uses. • Chapter 2. “Hardware” provides the hardware descriptions of the starter kit. • Appendix A. “Board Layout and Schematics” provides a block diagram, board layouts, and detailed schematics of the starter kit. • Appendix B. “Bill of Materials” provides the bill of materials for the components used in the design and manufacture of the starter kit.  2013 Microchip Technology Inc. DS70005147A-page 5 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Italic characters Initial caps Examples Referenced books MPLAB IDE User’s Guide Emphasized text ...is the only compiler... A window the Output window A dialog the Settings dialog A menu selection select Enable Programmer Quotes A field name in a window or dialog “Save project before build” Underlined, italic text with right angle bracket A menu path File>Save Bold characters A dialog button Click OK A tab Click the Power tab Text in angle brackets < > A key on the keyboard Press , Plain Courier New Sample source code #define START Filenames autoexec.bat File paths c:\mcc18\h Keywords _asm, _endasm, static Command-line options -Opa+, -Opa- Bit values 0, 1 Constants 0xFF, ‘A’ Italic Courier New A variable argument file.o, where file can be any valid filename Square brackets [ ] Optional arguments mcc18 [options] file [options] Curly brackets and pipe character: { | } Choice of mutually exclusive arguments; an OR selection errorlevel {0|1} Ellipses... Replaces repeated text var_name [, var_name...] Represents code supplied by user void main (void) { ... } Notes DS70005147A-page 6 Represents A Note presents information that we want to re-emphasize, either to help you avoid a common pitfall or to make you aware of operating differences between some device family members. A Note can be in a box, or when used in a table or figure, it is located at the bottom of the table or figure. Note: This is a standard note box. CAUTION This is a caution note. Note 1: This is a note used in a table.  2013 Microchip Technology Inc. Preface RECOMMENDED READING This user’s guide describes how to use the starter kit. The following Microchip documents are available and recommended as supplemental reference resources. PIC32MZ Embedded Connectivity (EC) Family Data Sheet (DS60001191) Refer to this document for detailed information on PIC32MZ EC family devices. Reference information found in this data sheet includes: • • • • Device memory maps Device pinout and packaging details Device electrical specifications List of peripherals included on the devices MPLAB® XC32 C/C++ Compiler User’s Guide (DS50001686) This document details the use of Microchip’s MPLAB XC32 C/C++ Compiler to develop an application. MPLAB® X IDE User’s Guide (DS50002027) Refer to this document for more information pertaining to the installation and implementation of the MPLAB X IDE software, as well as the MPLAB SIM Simulator software that is included with it. Universal Serial Bus Specification and Associated Documents The Universal Serial Bus is defined by the USB 2.0 specification and its associated supplements and class-specific documents. These documents are available from the USB Implementers Forum. See their web site at: http://www.usb.org THE MICROCHIP WEB SITE Microchip provides online support via our web site at http://www.microchip.com. This web site makes files and information easily available to customers. Accessible by most Internet browsers, the web site contains the following information: • Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software • General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listings • Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listings of seminars and events; and listings of Microchip sales offices, distributors and factory representatives  2013 Microchip Technology Inc. DS70005147A-page 7 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. The Development Systems product group categories are: • Compilers – The latest information on Microchip C compilers and other language tools • Emulators – The latest information on the Microchip in-circuit emulator, MPLAB REAL ICE™ • In-Circuit Debuggers – The latest information on the Microchip in-circuit debugger, MPLAB ICD 3 • MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the Windows® Integrated Development Environment for development systems tools • Programmers – The latest information on Microchip programmers including the PICkit™ 3 development programmer CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • • • • Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com DS70005147A-page 8  2013 Microchip Technology Inc. Preface DOCUMENT REVISION HISTORY Revision A (November 2013) This is the initial release of this document.  2013 Microchip Technology Inc. DS70005147A-page 9 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide NOTES: DS70005147A-page 10  2013 Microchip Technology Inc. PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT USER’S GUIDE Chapter 1. Introduction Thank you for purchasing a Microchip Technology PIC32MZ Embedded Connectivity (EC) Starter Kit. This board provides a low-cost, modular development system for Microchip’s line of 32-bit microcontrollers. The starter kit comes preloaded with demonstration software for the user to explore the new features of the PIC32MZ EC family of devices. It is also expandable through a modular expansion interface, which allows the user to extend its functionality. The starter kit also supplies on-board circuitry for full debug and programming capabilities. This chapter covers the following topics: • Kit Contents • Starter Kit Functionality and Features The preprogrammed example code on the PIC32MZ EC family MCU is available for download from the Microchip web site at http://www.microchip.com. All project files have been included so that the code may be used directly to restore the PIC32MZ EC family MCU on the starter kit to its original state (i.e., if the sample device has been reprogrammed with another program) or so you can use the tutorial code as a platform for further experimentation. 1.1 KIT CONTENTS The PIC32MZ Embedded Connectivity (EC) Starter Kit contains the following items: • PIC32MZ Embedded Connectivity (EC) Starter Kit development board • SMSC 8870A Ethernet PHY daughter board • USB mini-B to full-sized A cable – USB debug cable to debug and power the starter kit development board • USB micro-B to full-sized A cable – PIC32 USB cable to communicate with the PIC32 USB port • RJ-45 CAT5 Ethernet patch cable – Ethernet CAT5 cable to communicate with the PIC32 Ethernet port Note:  2013 Microchip Technology Inc. If you are missing any part of a kit, contact a Microchip sales office for assistance. A list of Microchip offices for sales and service is provided on the back page of this document. DS70005147A-page 11 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide 1.2 STARTER KIT FUNCTIONALITY AND FEATURES Representations of the layout of the PIC32MZ Embedded Connectivity (EC) Starter Kit are shown in Figure 1-1 and Figure 1-2. The top assembly of the board includes these key features, as indicated in Figure 1-1: 1. PIC32MZ2048ECH144-I/PH (non-crypto) or PIC32MZ2048ECM144-I/PH (crypto) 32-bit microcontroller. 2. Green power indicator LED. 3. On-board crystal or oscillator for precision microcontroller clocking (12 MHz). 4. USB connectivity for on-board debugger communications. 5. Green debug indicator LED. 6. Three push button switches for user-defined inputs. 7. Three user-defined indicator LEDs. 8. USB Type A receptacle connectivity for PIC32 host-based applications. 9. HOST mode power jumper. 10. Daughter board connectors for flexible Ethernet PHY options. 11. 32 kHz oscillator for RTCC and Timer1 (optional). 12. External 2 GB SQI memory for expanded memory applications. 13. Jumper for using or disconnecting the on-board debugger. Note: When running self-powered USB device applications, open the jumper JP1 to prevent possibly back-feeding voltage onto the VBUS from one port on the host to another (or from one host to another). For details on these features, refer to Chapter 2. “Hardware”. FIGURE 1-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (TOP VIEW) 13 12 10 6 7 6 1 4 9 7 5 6 7 8 3 11 2 DS70005147A-page 12  2013 Microchip Technology Inc. Introduction The bottom assembly of the board includes these key features, as indicated in Figure 1-2: 1. PIC24FJ256GB106 USB microcontroller for on-board debugging. 2. Regulated +3.3V power supply for powering the starter kit through USB or expansion board. 3. Connector for various expansion boards. 4. USB Type micro-AB receptacle for OTG and USB device connectivity for PIC32 OTG/device-based applications. 5. 50 MHz Ethernet PHY oscillator. 6. USB Host and OTG power supply for powering PIC32 USB applications. FIGURE 1-2: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (BOTTOM VIEW) 5 3 2 1 4 6  2013 Microchip Technology Inc. DS70005147A-page 13 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide NOTES: DS70005147A-page 14  2013 Microchip Technology Inc. PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT USER’S GUIDE Chapter 2. Hardware This chapter describes the hardware features of the PIC32 Ethernet Starter Kit. 2.1 HARDWARE FEATURES The key features of the PIC32MZ Embedded Connectivity (EC) Starter Kit are listed below. They are presented in the order given in Section 1.2 “Starter Kit Functionality and Features”. You can refer to Figure 1-1 for their locations on the board. 2.1.1 Processor Support The PIC32MZ Embedded Connectivity (EC) Starter Kit is designed with a permanently mounted (i.e., soldered) PIC32MZ2048ECM144 processor. 2.1.2 Power Supply There are two ways to supply power to the PIC32MZ Embedded Connectivity (EC) Starter Kit: • USB bus power connected to USB debug connector J1 • An external application board with a regulated DC power supply that provides +5V can be connected to the J2 application board connector that is provided on the bottom side of the board One green LED (D3) is provided to indicate the PIC32 microcontroller is powered up. 2.1.3 Debug USB Connectivity The PIC32MZ Embedded Connectivity (EC) Starter Kit includes a PIC24FJ256GB106 USB microcontroller that provides debugger connectivity over USB. The PIC24FJ256GB106 is hard-wired to the PIC32 device to provide protocol translation through the I/O pins of PIC24FJ256GB106 to the ICSP™ pins of the PIC32. If MPLAB REAL ICE™ or MPLAB ICD 3 are used with the starter kit, it is necessary to disconnect the on-board debugger from the PIC32 device. To do this, remove the JP2 jumper. When the on-board debugger is required, replace the JP2 jumper. When the JP2 jumper is installed, pin 1 must be connected to pin 3 and pin 2 must be connected to pin 4. 2.1.4 PIC32 USB Connectivity There are three possible ways to connect to the PIC32 USB microcontroller: • HOST Mode – Connect the device to the Type A connector J4, which is located on the top side of the starter kit. If using the Debug USB port to power the Host port, install jumper JP1 to short the back-power prevention diode. Note that a maximum of ~400 mA can be supplied from the Debug USB port to the Host port using this method. If the full 500 mA supply is needed, an external supply must be connected to the application board and jumper JP1 must be removed to prevent back-powering the Debug USB port.  2013 Microchip Technology Inc. DS70005147A-page 15 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide • DEVICE Mode – Connect the debug mini-B USB cable to port J1 and then connect the starter kit to the host using a cable with a Type-B micro-connector to the starter kit’s micro-A/B port J5, which is located on the bottom side of the board. The other end of the cable must have a Type-A connector. Connect it to a USB host. Jumper JP1 should be removed. • OTG Mode – Connect the starter kit to the OTG device using an OTG micro-A/B cable to the micro-A/B port J5, which is located on the bottom side of the board. The starter kit provides an on-board power supply capable of providing 120 mA Max. This supply is controlled by the PIC32MZ2048ECH144 microcontroller. Jumper JP1 should be removed. 2.1.5 Switches Push button switches provide the following functionality: • SW1: Active-low switch connected to RB12 • SW2: Active-low switch connected to RB13 • SW3: Active-low switch connected to RB14 The switches do not have any debounce circuitry and require the use of internal pull-up resistors; this allows you to investigate software debounce techniques. When Idle, the switches are pulled high (+3.3V). When pressed, they are grounded. 2.1.6 LEDs The RH0 through RH2 LEDs are connected to PORTH of the processor. The PORTH pins are set high to light the LEDs. 2.1.7 Oscillator Options The installed microcontroller has an oscillator circuit connected to it. The main oscillator uses an 12 MHz crystal (Y1) and functions as the controller’s primary oscillator. Depending on which is populated on the starter kit board, a 12 MHz external oscillator (Y4) may be used instead of Y1. Use of an external crystal is required to develop USB applications. The USB specification dictates a frequency tolerance of ±0.25% for high speed. Non-USB applications can use the internal oscillators. The starter kit also has provisions for an external secondary 32 kHz oscillator (Y2); however, this is not populated. A suitable oscillator, the ECS-3X8, can be obtained from Digi-Key: Part no. X801-ND CMR200TB32.768KDZFTR. The PIC24FJ256GB106 is independently clocked and has its own 12 MHz crystal. 2.1.8 168-Pin Modular Expansion Connector The PIC32MZ Embedded Connectivity (EC) Starter Kit has been designed with a 168-pin modular expansion interface, which allows the board to provide basic generic functionality and easy extendability to new technologies as they become available. TABLE 2-1: STARTER KIT CONNECTOR PART NUMBERS Connector DS70005147A-page 16 HIROSE Electric PN Starter Kit Connector FX10A-168P-SV1(71) Application Board Connector FX10A-168S-SV  2013 Microchip Technology Inc. Hardware 2.1.9 Ethernet PHY The PIC32MZ Embedded Connectivity (EC) Starter Kit has been designed to use a wide variety of Ethernet PHYs through the Reduced Media Independent Interface (RMII). The starter kit comes with a daughter board that is populated with a SMSC 8720A Ethernet PHY. The RMII has been isolated from the expansion connector. To use a different Ethernet PHY other than what is offered, visit the microchipDIRECT website (www.microchipdirect.com) for the list of alternate options.  2013 Microchip Technology Inc. DS70005147A-page 17 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide NOTES: DS70005147A-page 18  2013 Microchip Technology Inc. PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT USER’S GUIDE Appendix A. Board Layout and Schematics A.1 BLOCK DIAGRAM FIGURE A-1: HIGH-LEVEL BLOCK DIAGRAM OF THE PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT Power Circuit USB OTG VUSB3V3(1) or +5V_EXT Device/OTG (Type micro-A/B) +3.3V Power Supply Host (Type A) Debug USB Debugger Circuit +5V EXT ICSP™ (PIC24FJ256GB106) PIC32MZ2048ECH144 Switches LEDs Note 1: Ethernet PHY Daughter Board Application Board Connector USB Host 10/100 Jack From Debugger USB Port.  2013 Microchip Technology Inc. DS70005147A-page 19 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide A.2 BOARD LAYOUT FIGURE A-2: DS70005147A-page 20 PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (TOP ASSEMBLY)  2013 Microchip Technology Inc. Board Layout and Schematics FIGURE A-3: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (BOTTOM ASSEMBLY)  2013 Microchip Technology Inc. DS70005147A-page 21 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide A.3 SCHEMATICS FIGURE A-4: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (PIC32MZ EC FAMILY DEVICE) PIC32MZ RG15 J7 2 EBIA5/PMA5/RA5 P32_VDD 1 ICSP_MCLR_VPP_TARGET EBID6/PMD6 3 EBID7/PMD7 4 PGED2/AN47/RPB7/RB7 4 5 6 EBIA6/PMA6 R48 33R 5 PGEC2/AN46/RPB6/RB6 3 EBID5/PMD5 2 7 ETXD0 R49 33R 6 8 ETXD1 9 EBIBS0/RJ12 10 EBIBS1/RJ10 11 EBIA12/PMA12/RC2 12 EBIWE/PMWR/RC3 13 EBIOE/PMRD/RC4 AN14/C1IND/RPG6/SCK2/RG6 AN13/C1INC/RPG7/SDA4/RG7 AN12/C2IND/RPG8/SCL4/RG8 P32_VDD R1 4.7K P32_VDD C20 0.01uF 20 21 TMS/RA0 AN25/RPE8/RE8 AN26/RPE9/RE9 AN45/C1INA/RPB5/RB5/VBUSON AN4/C1INB/RB4 EREF_CLK EBIA13/PMA13/RJ13 C21 0.01uF PGED1/AN0/RPB0/RB0 PGEC2/AN46/RPB6/RB6 PGED2/AN47/RPB7/RB7 VREF-/RA9 VREF+/RA10 P32_VDD C22 0.01uF RH1 RH2 RH3 AN6/RB11 36 37 38 39 40 43 44 45 46 49 50 51 EBIA1/PMA1 52 EBIA3/PMA3 53 EBIA17/RK3 54 C4 0.1uF C23 0.01uF 55 TCK/RA1 TDI/RF13 TDO/RF12 AN7/RB12 AN8/RB13 AN9/RPB14/SCK3/RB14 AN10/RPB15/OCFB/RB15 56 57 58 59 60 61 62 63 C5 0.1uF C24 0.01uF 64 ERXERR ERXD1 AN42/ERXD2/RH6 EBIA4/PMA4 P32_VDD AN32/AETXD0/RPD14/RD14 4 AN33/RPD15/SCK6/RD15 3 65 66 67 68 69 70 71 72 24MHz C34 Only Oscillator or Crystal Configuration 35 48 EBIA7/PMA7 CVREFOUT/AN5/RPB10/RB10 GND OUT 34 47 EBIA10/PMA10/RB8 VDD 31 42 RH0 EN 27 41 C3 0.1uF Y4 26 33 PGEC1/AN1/RPB1/RB1 P32_VDD 25 32 C2 0.1uF AN2/C2INB/RPB2/RB2 P32_VDD 24 30 AN3/C2INA/RPB3/RB3 P32_VDD 23 29 EBIA0/PMA0/RJ15 P32_VDD 22 28 EBIA11/PMA11/RB12 2 16 19 EBIA2/PMA2/RG9 C29 15 18 EBIA16/RK0 0.01uF 14 17 C1 0.1uF ICSP_MCLR_VPP_TARGET 1 1 8.0pF should be populated. U1 AN23/RG15 EBID4/AN18/PMD4/RE4 EBIA5/AN34/PMA5/RA5 EBID3/RPE3/PMD3/RE3 EBID5/AN17/RPE5/PMD5/RE5 EBID2/PMD2/RE2 EBID6/AN16/PMD6/RE6 TRD0/SQID0/RG13 EBID7/AN15/PMD7/RE7 TRD1/SQID1/RG12 EBIA6/AN22/RPC1/PMA6/RC1 TRD2/SQID2/RG14 AN35/ETXD0/RJ8 EBID1/PMD1/RE1 AN36/ETXD1/RJ9 VDD EBIBS0/RJ12 VSS EBIBS1/RJ10 EBID0/PMD0/RE0 EBIA12/AN21/RPC2/PMA12/RC2 EBICS3/RJ7 EBIWE/AN20/RPC3/PMWR/RC3 EBICS2/RJ6 EBIOE/AN19/RPC4/PMRD/RC4 EBICS1/RJ5 AN14/C1IND/RPG6/SCK2/RG6 EBICS0/RJ4 AN13/C1INC/RPG7/SDA4/RG7 TRD3/SQID3/RA7 AN12/C2IND/RPG8/SCL4/RG8 TRCLK/SQICLK/RA6 VSS EBID8/RPG0/PMD8/RG0 VDD EBID9/RPG1/PMD9/RG1 EBIA16/RK0 EBIA21/RK7 EBID10/RPF1/PMD10/RF1 MCLR EBIA2/AN11/C2INC/RPG9/PMA2/RG9 EBID11/RPF0/PMD11/RF0 TMS/AN24/RA0 VSS AN25/RPE8/RE8 VDD ETXCLK/RPD7/RD7 AN26/RPE9/RE9 AN45/C1INA/RPB5/RB5 ETXEN/RPD6/RD6 AN4/C1INB/RB4 SQICS1/RPD5/RD5 AN37/ERXCLK/EREFCLK/RJ11 SQICS0/RPD4/RD4 EBIA13/PMA13/RJ13 EBIA22/RJ3 EBIA11/PMA11/RJ14 EBIRDY3/RJ2 EBIA0/PMA0/RJ15 EMDIO/AEMDIO/RJ1 AN3/C2INA/RPB3/RB3 ETXERR/RJ0 VSS EBID13/PMD13/RD13 VDD EBID12/RPD12/PMD12/RD12 AN2/C2INB/RPB2/RB2 EBID15/RPD3/PMD15/RD3 PGEC1/AN1/RPB1/RB1 EBID14/RPD2/PMD14/RD2 PGED1/AN0/RPB0/RB0 RPD1/SCK1/RD1 PGEC2/AN46/RPB6/RB6 VSS PGED2/AN47/RPB7/RB7 VDD VREF-/CVREF-/AN27/RA9 SOSCO/RPC14/T1CK/RC14 VREF+/CVREF+/AN28/RA10 SOSCI/RPC13/RC13 AVDD RPD0/RTCC/INT0/RD0 EBIA23/RH15 AVSS AN38/ETXD2/RH0 EBIADVN/RH14 AN39/ETXD3/RH1 ERXDV/ECRSV/AECRSDV/RH13 EBIRP/RH2 ECRS/RH12 EBIWP/RH3 EMDC/AEMDC/RPD11/RD11 EBIA10/AN48/RPB8/PMA10/RB8 RPD10/SCK4/RD10 EBIA7/AN49/RPB9/PMA7/RB9EBIA15/RPD9/PMCS2/PMA15/RD9 CVREFOUT/AN5/RPB10/RB10 AN6/RB11 RPA15/SDA1/RA15 RPA14/SCL1/RA14 EBIA1/PMA1/RK1 EBIA20/RK6 EBIA3/PMA3/RK2 EBIA19/RK5 EBIA17/RK3 EBIA18/RK4 VSS EBIA8/RPF5/SCL5/PMA8/RF5 VDD EBIA9/RPF4/SDA5/PMA9/RF4 TCK/AN29/RA1 VSS TDI/AN30/RPF13/SCK5/RF13 VDD TDO/AN31/RPF12/RF12 EBIA14/PMCS1/PMA14/RA4 AN7/RB12 EBIRDY1/SDA2/RA3 AN8/RB13 SCL2/RA2 AN9/RPB14/SCK3/RB14 AN10/RPB15/OCFB/RB15 VSS VDD AN40/ERXERR/RH4 EBIRDY2/RH11 ECOL/RH10 ERXD3/RH9 ERXD0/RH8 SCL3/RPF8/RF8 AN41/ERXD1/RH5 SDA3/RPF2/RF2 AN42/ERXD2/RH6 RPF3/USBID/RF3 EBIA4/PMPA4/RH7 D+ AN32/AETXD0/RPD14/RD14 D- AN33/RPD15/SCK6/RD15 OSCI/CLKI/RC12 OSCO/CLKO/RC15 VSS VUSB3V3 VBUS 144 EBID4/PMD4 143 EBID3/PMD3 142 141 140 139 EBID2/PMD2 TRD0/SQID0/RG13 TRD1/SQID1/RG12 TRD2/SQID2/RG14 138 EBID1/PMD1 P32_VDD 137 C28 0.01uF 136 135 EBID0/PMD0 134 EBICS3/RJ7 133 EBICS2/RJ6/SQI_PWR 132 EBICS1/RJ5 131 130 129 EBICS0/RJ4 TRD3/SQID3/RA7 R51 33R TRCLK/SQICLK/RA6 128 EBID8/PMD8 127 EBID9/PMD9 126 EBIA21/RK7 125 EBID10/PMD10 124 EBID11/PMD11 123 C27 0.01uF 122 121 120 119 118 P32_VDD ETXEN SQICS1/RPD5/RD5 SQICS0/RPD4/RD4 EBIA22/RJ3 116 114 EBIRDY3/RJ2 EMDIO ETXERR/RJ0 113 EBID13/PMD13 112 EBID12/PMD12 111 EBID15/PMD15 110 109 EBID14/PMD14 RPD1/SCK1/RD1 108 105 104 100 99 98 95 3 EBIA23/RH15 DNP EBIADV/RH14 ECRS/RH12 EMDC RPD10/SCK4/RD10 EBIA15/PMCS2/RD9 RPA15/SDA1/RA15 P32_VDD RPA14/SCL1/RA14 EBIA20/RK6 EBIA19/RK5 P32_VDD 92 EBIA18/RK4 91 EBIA8/PMA8 90 EBIA9/PMA9 89 C25 0.01uF 88 C6 0.1uF P32_VDD 87 EBIA14/PMCS1/PMA14/RA4 R55 0R 86 SDA2/RA3 81 80 79 78 DNP EBIRDY2/RH11 ECOL/RH10 ERXD3/RH9 ERXD0 SCL3/RPF8/RF8 SDA3/RPF2/RF2 RF3/USBID/RPF3 77 D+ 76 D- 75 C47 DNP 74 73 C49 SCL2/RA2 84 82 2 ECRS/RH13 93 83 OUTGND 1 TC25L5I32K7680 INT0/RD0 94 85 VDD EN 32.768 kHz SOSCI/RC13 97 96 4 SOSCO/RC14 102 0.01uF Y2 C7 0.1uF P32_VDD 103 101 P32_VDD C36 C26 0.01uF 107 106 C8 0.1uF ETXCLK/RPD7/RD7 R50 33R 117 115 C9 0.1uF P32_VDD VBUS R56 1M ±1% 24MHz Y1 Please check PCB/BOM to determine which configuration is populated DS70005147A-page 22 C35 8.0pF  2013 Microchip Technology Inc. Board Layout and Schematics FIGURE A-5: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (USB HOST AND OTG POWER SUPPLIES) PHY Daughter Board Connections J6 ETXD0 ETXD1 R54 DNP P32_VDD CLK_IN P32_VDD C48 0.01uF C19 Y5 2 VDD EN GND OUT 4 3 13 2 14 3 15 4 16 5 17 6 18 7 19 8 20 9 21 10 22 11 23 0.1uF 25 1 1 12 R52 33R 25 ETXEN ERXD1 ERXD0 ERXERR ECRS/RH13 EMDC EMDIO R38 0R SOSCI/RC13 ICSP_MCLR_VPP_TARGET 24 CLK_IN 50MHz EREF_CLK R53 33R 2 HDR/MB SLM-112-01-G-S + SLM-103-01-G-S USB OTG/Device Power Supply (120mA MAX) MH1 VBUS_DEVICE +5V_EXT VBUS P32_VDD D1 R46 MBR0520LT1G DNP AN2/C2INB/RPB2/RB2 U5 8 SELECT PGOOD 1 J4 Vout 2 P32_VDD R4 6 4.7K C33 C+ Vin 3 C45 10ˇF C44 5 1uF C- GND 1 VBUS R24 100K 10ˇF 4 2 D- 3 D+ RF3/USBID/RPF3 VBUS DEVICE/OTG PORT SHIELD SHDN D- TYPE MICRO A/B D+ 4 6 AN45/C1INA/RPB5/RB5/VBUSON 5 7 MCP1253_MSOP USB HOST Power Supply 1 2 5 J5 U6 IN OUT 1 1 JP1 GND AN45/C1INA/RPB5/RB5/VBUSON 4 EN OC C46 100uF 2 3 DD+ 2 3 VBUS DHOST TYPE - TYPE A D+ 4 AN2/C2INB/RPB2/RB2 6 +5V_DUSB 5 * Install Jumper if powering from Debugger Power Supply +5V_EXT TPS2051B Current Limiting Switch R47 DNP R26 +3.3V_PKOB P32_VDD 100K 1 C42 4.7uF TARGET_POWER_ENABLE R25 100K 2 3 IN OUT 5 D7 GND GRN ON FLAGB 4 U7 FPF2104 R13 330R VBUS_DEVICE_SWITCHED_SENSE  2013 Microchip Technology Inc. DS70005147A-page 23 PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (DEBUGGER) +3.3V_PKOB +3.3V_PKOB SERIAL EEPROM (25LC256) C43 10ˇF TARGET_POWER_ENABLE +3.3V_PKOB C13 0.1uF R15 UTIL_CS 200K 10K SDO SDI GND 5 UTIL_SDO SCK 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 UTIL_CS 7 8 OSC2/CLKO/RC15 U2 OSC1/CLKIN/RC12 VDD D+/RG2 D-/RG3 Vusb PMA8/SCL2/RF5 PMA9/SDA2/RF4 PMA0/AN15/RB15 PMA1/AN14/RB14 PMA10/AN13/RB13 PMA11/AN12/RB12 VDD VSS PMA12/AN11/RB11 AN8/RB8 AVSS AVDD C11 0.1uF AN7/RB7 AN6/RB6 AN0/RB0 PMA7/AN9/RB9 16 PMA13/AN10/RB10 AN1/RB1 Vbus USBID/RF3 C32 1uF R18 47 ASSEMBLY_ID_0 46 GND 10K UTIL_SDO 45 JP2 Jumper Positions GND UTIL_SDI PKOB Mode 44 43 +3.3V_PKOB C39 42 UTIL_SCK 8pF 41 GND Y3 40 2 12.0MHz 39 +3.3V_PKOB 38 C38 37 R14 10K 4 pins 1-3: Open pins 2-4: Shorted pins 2-4: Open J2 1 ICSP_MCLR_VPP_PICKIT3 GND REAL ICE Mode pins 1-3: Shorted 2 USB_D+ 36 USB_D- 3 8pF +3.3V_PKOB R35 34 4 PGD_PKOB 35 TARGET ICSP SIGNALS 5 PGC__PKOB VBUS_DEVICE 6 100R 33 R8 GND SDO 330R 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 SDI R2 4.7K 330R JP2 PGED2/AN47/RPB7/RB7 1 3 2 4 PGEC2/AN46/RPB6/RB6 GND PGC__PKOB +3.3V_PKOB C17 0.1uF +3.3V_PKOB R9 GND C16 0.1uF GND UTIL_SDI 4 DHP/RD2 PMBE/RD3 PMRD/RD5 PMWR/RD4 RD6 RD7 Vcap/VDDCORE ENVREG RF0 RF1 PMPD0/RE0 PMPD2/RE2 PMPD1/RE1 VCPCON/RD1 VSS AN2/RB2 15 R37 3.16K PIC24FJ256GB106 AN3/RB3 14 VREF_2.5V RTCC/RD8 USBOENAN4/RB4 13 VDD_SENSE R34 1K SDA1/RD9 MCLR AN5/RB5 12 VPP_SENSE PMA3/RG8 VDD 11 +3.3V_PKOB SCL1/PMCS2/RD10 VSS 10 GND PMA4/RG7 PMA2/RG9 9 +3.3V_PKOB PMCS1/RD11 ASSEMBLY_ID_1 HOLD R32 2.21K 3 6 INT0/RD0 PMA5/RG6 48 C15 0.1uF (Local VDD/VSS bypass/decoupling) 1 5 330R SOSCI/RC13 PMD7/SDA3/RE7 4 R11 SOSCO/RC14 PMD6/SCL3/RE6 3 ICSP_MCLR_VPP_PICKIT3 PMPD3/RE3 PMD5/RE5 2 VPP_GND PMPD4/RE4 1 C14 0.1uF WP 7 10K 2 CS 3 R17 SO SCK 1 UTIL_WP VPP_ON SI 6 UTIL_SCK VBUS_DEVICE_SWITCHED_SENSE VCC U4 25LC256-I/ST VSS UTIL_WP 8 GND R29 R10 SCK PGD_PKOB R16 10K C31 1uF 330R R3 4.7K POWER_GOOD_PICKIT3 C12 0.1uF GND +3.3V_PKOB GND GND +3.3V_PKOB R33 3.92K R19 10K R27 100K Q1 VDD_SENSE MMBT3906-TP VPP_SENSE R31 2.21K POWER DISTRIBUTION/SWITCHING U3 D2 MBR0520LT1G 1 VUSB 2 D- USB INTERFACE (BUS POWERED) USB_D- 3 D+ USB_D+ 4 ID VBUS_DEVICE 1 2 C40 2.2uF 3 4 5 VIN VOUT VIN SENSE SHDN GND +3.3V_PKOB CDELAY PWRGD , , GND R42 0R R20 10K ICSP_MCLR_VPP_TARGET GND R36 8 R21 7 D6 C41 2.2uF 6 +3.3V_PKOB VPP_ON 100R 1206 1/4W Q2 GND MMBT3904-TP 10K GRN 5 R28 200K C10 0.1uF C30 0.01uF R43 R45 DNP 2.2K DNP R12 330R R22 6 7 8 9 GND +3.3V_PKOB MCP1727-3302E/MF +5V_DUSB GND_EP J3 UX60-MB-5ST 9  2013 Microchip Technology Inc. R30 2.21K , Q3 MMBT3904-TP VPP_GND GND 10K GND R39 0R R44 DNP POWER_GOOD_PICKIT3 EGND GND GND PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide DS70005147A-page 24 FIGURE A-6: Board Layout and Schematics FIGURE A-7: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (APPLICATION BOARD CONNECTOR, SQI MEMORY AND POWER, LEDS, AND SWITCHES) J1 EBI ADDRESS EBIA1/PMA1 EBIA2/PMA2/RG9 EBIA3/PMA3 EBIA4/PMA4 EBIA5/PMA5/RA5 EBIA6/PMA6 P32_VDD EBIA7/PMA7 EBIA8/PMA8 EBIA9/PMA9 EBIA10/PMA10/RB8 EBI ADDRESS EBIA11/PMA11/RB12 EBIA12/PMA12/RC2 EBIA13/PMA13/RJ13 EBIA14/PMCS1/PMA14/RA4 EBIA15/PMCS2/RD9 EBIA16/RK0 EBIA17/RK3 EBIA18/RK4 EBIA19/RK5 EBI ADDRESS P32_VDD EBIA20/RK6 EBIA21/RK7 EBIA22/RJ3 EBI CONT EBIA23/RH15 EBIBS0/RJ12 EBIBS1/RJ10 EBIADV/RH14 AN14/C1IND/RPG6/SCK2/RG6 AN13/C1INC/RPG7/SDA4/RG7 AN12/C2IND/RPG8/SCL4/RG8 AN25/RPE8/RE8 AN26/RPE9/RE9 ADC P32_VDD AN45/C1INA/RPB5/RB5/VBUSON AN4/C1INB/RB4 AN3/C2INA/RPB3/RB3 AN2/C2INB/RPB2/RB2 VREF-/RA9 VREF+/RA10 GPIO/PPS RH0 RH1 CVREFOUT/AN5/RPB10/RB10 AN6/RB11 AN7/RB12 AN8/RB13 P32_VDD EBID15/PMD15 EBID15/PMD15 EBID15/PMD15 EBID11/PMD11 EBID12/PMD12 EBID13/PMD13 RGB EBID14/PMD14 EBID15/PMD15 EBID10/PMD10 LCD EBID10/PMD10 EBID5/PMD5 EBID6/PMD6 EBIOE/PMRD/RC4 GPIO +5V_EXT AN9/RPB14/SCK3/RB14 AN45/C1INA/RPB5/RB5/VBUSON AN14/C1IND/RPG6/SCK2/RG6  2013 Microchip Technology Inc. 14 15 16 17 18 19 21 23 25 27 20 22 24 DEBUG +5V_EXT INT0/RD0 INTO TRD0/SQID0/RG13 TRD1/SQID1/RG12 TRD2/SQID2/RG14 TRD3/SQID3/RA7 TRCLK/SQICLK/RA6 P32_VDD TRACE RG15 EBIA0/PMA0/RJ15 13 PGEC2/AN46/RPB6/RB6 Q5 S EBICS2/RJ6/SQI_PWR G 26 R23 10K 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 SQI_VDD U9 5 TRD0/SQID0/RG13 2 TRD1/SQID1/RG12 3 7 TRD3/SQID3/RA7 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 SI/SIO0 VDD SO/SIO1 VSS SIO2 SCK SIO3 CE# 8 P32_VDD TRD2/SQID2/RG14 53 D SQI_VDD EBI DATA SQICS0/RPD4/RD4 SQICS1/RPD5/RD5 12 EBI DATA SOSC SOSCO/RC14 10 4 6 1 C18 0.1uF TRCLK/SQICLK/RA6 SQICS1/RPD5/RD5 SST26VF032 RH2 RH3 EBIWE/PMWR/RC3 EBI CONTROL SOSCI/RC13 8 9 JTAG PGED2/AN47/RPB7/RB7 USER LEDS' D3 R5 P32_VDD LED1 USERSSWITCH' Red RH0 AN7/RB12 S1 330R EBICS0/RJ4 D4 R6 EBICS1/RJ5 EBIRDY3/RJ2 AN9/RPB14/SCK3/RB14 AN8/RB13 S2 D5 R7 EBICS3/RJ7 SDA2/RA3 Yellow 330R EBICS2/RJ6/SQI_PWR EBIRDY2/RH11 LED2 RH1 LED3 Green RH2 EBI CONTROL ICSP_MCLR_VPP_TARGET 7 11 TCK/RA1 TMS/RA0 330R AN9/RPB14/SCK3/RB14 S3 GND AN10/RPB15/OCFB/RB15 AN42/ERXD2/RH6 AN32/AETXD0/RPD14/RD14 AN33/RPD15/SCK6/RD15 P32_VDD RF3/USBID/RPF3 SDA3/RPF2/RF2 SCL3/RPF8/RF8 I2C MCLR 6 ERXD3/RH9 ECOL/RH10 SCL2/RA2 RPD10/SCK4/RD10 ECRS/RH12 RPD1/SCK1/RD1 ETXERR/RJ0 GPIO/PPS +5V_EXT 4 5 ETXCLK/RPD7/RD7 RPA14/SCL1/RA14 RPA15/SDA1/RA15 P32_VDD EBID4/PMD4 EBID3/PMD3 EBID2/PMD2 EBID1/PMD1 EBID0/PMD0 EBID4/PMD4 EBID4/PMD4 EBID4/PMD4 EBID10/PMD10 RGB PGEC1/AN1/RPB1/RB1 DEBUG 2 3 EBID9/PMD9 EBID8/PMD8 EBID7/PMD7 LCD PGED1/AN0/RPB0/RB0 1 +5V_EXT GPIO TDI/RF13 FX10A-168P-SV1(71) TDO/RF12 JTAG AN12/C2IND/RPG8/SCL4/RG8 ETXCLK/RPD7/RD7 DS70005147A-page 25 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide NOTES: DS70005147A-page 26  2013 Microchip Technology Inc. PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT USER’S GUIDE Appendix B. Bill of Materials TABLE B-1: Reference PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS Description Manufacturer Part No. C1, C2, CAP CER .10 µF 50V X7R 0603 C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19 TDK Corporation C1608X7R1H104M C20, C21, CAP CER 10000 pF 50V X7R 0603 C22, C23, C24, C25, C26, C27, C28, C29, C30, C48 TDK Corporation C1608X7R1H103M C31, C32, CAP CER 1.0 µF 16V X5R 10% 0603 C33 TDK Corporation C1608X5R1C105K C38, C39 CAP CER 8 pF 50V NP0 0603 Murata GRM1885C1H8R0DZ01D C40, C41 CAP CER 2.2 µF 16V X5R 0603 TDK Corporation C1608X5R1C225K CAP CER 4.7 µF 6.3V 10% X5R 0603 Taiyo Yuden JMK107BJ475KA-T Murata GRM21BF51C106ZE15L CAP CER 100 µF 6.3V Y5V 1206 Murata GRM31CF50J107ZE01L DIODE SCHOTTKY 20V 0.5A SOD123 ON Semiconductor MBR0520LT1G D3 LED, SMD, RED, 0603 package Kingbright Corp APT1608EC D4 LED, SMD, YEL, 0603 package Kingbright Corp APT1608YC Kingbright Corp APT1608SGC Hirose Electric Co Ltd FX10A-168P-SV1(71) C42 C43, C44, CAP CER 10 µF 16V Y5V 0805 C45 C46 D1, D2 D5, D6, D7 LED, SMD, GRN, 0603 package J1 Hirose FX10_ 168-pin Header J7 CONN HEADER .050" 6 POS PCB GOLD Samtec TMS-106-01-G-S J3 CONN RECEPT MINI USB 2.0 5 POS Hirose Electric Co Ltd UX60-MB-5ST J4 CONN USB TYPE MICRO_A/B Hirose Electric Co Ltd ZX62-AB-5PA(11) J5 CONN USB TYPE A R/A BLACK On Shore Technology Inc USB-A1HSB6 J6 12 POS 0.05" SINGLE ROW TH HEADER Samtec SLM-103-112-L-S @J6 3POS 0.05" SINGLE ROW TH HEADER Samtec SLM-103-103-L-S JP2 2X2 (0.05"x 0.05") TH HEADER Samtec FTS-102-01-L-D SULLINS NPB02DVFN-RC SULLINS PRPC002SAAN-RC installed @ SHUNT 2POS (0.05" x 0.05") JP2 JP1 CONN HEADER .100" SNGL STR 2POS  2013 Microchip Technology Inc. DS70005147A-page 27 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS (CONTINUED) Reference Description Manufacturer Part No. Q1 TRANS SS PNP 40V 300MW SOT23 Micro Commercial Co. MMBT3906-TP Q2, Q3 TRANSISTOR NPN GP 40V SOT23 Micro Commercial Co. MMBT3904-TP MOSFET P-CH 8V 3.7A SOT23-3 ON Semiconductor NTR2101PT1G RES 4.7K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT4K70 R5, R6, RES 330 OHM 1/10W 1% 0603 SMD R7, R8, R9, R10, R11, R12, R13 Stackpole Electronics Inc. RMCF0603FT330R R14, R15, RES 10K OHM 1/10W 1% 0603 SMD R16, R17, R18, R19, R20, R21, R22, R23 Stackpole Electronics Inc. RMCF0603FT10K0 R24, R25, RES 100K OHM 1/10W 1% 0603 SMD R26, R27 Stackpole Electronics Inc. RMCF0603FT100K R28, R29 Stackpole Electronics Inc. RMCF0603FT200K Panasonic - ECG ERJ-3EKF2211V Q5 R1, R2, R3, R4 RES 200K OHM 1/10W 1% 0603 SMD R30, R31, RES 2.21K OHM 1/10W 1% 0603 SMD R32 R33 RES 3.92K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-073K92L R34 RES 1K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT1K00 R35 RES 100 OHM 1/10W 5% 0603 SMD Yageo RC0603JR-07100RL R36 RES 100 OHM 1/4W 1% 1206 SMD Yageo RC1206FR-07100RL R37 RES 3.16K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-073K16L RES 0.0 OHM 1/10W 0603 SMD Rohm Semiconductor MCR03EZPJ000 R48, R49, RES 33 OHM 1/10W 1% 0603 SMD R50, R51, R52, R53 Stackpole Electronics Inc. RMCF0603FT33R0 S1, S2, S3 Switch, Tact, PB MOM SMT, Series TL3302 C&K PTS635SK25SMTR LFS R38, R39, R42, R55 U1 PIC32MZ2048ECH144-I/PH Microchip Technology Inc. PIC32MZ2048ECH144-I/PH U2 IC PIC MCU FLASH 256K 64-TQFP Microchip Technology Inc. PIC24FJ256GB106-I/PT U3 IC REG LDO 1.5A 3.3V 8DFN Microchip Technology Inc. MCP1727-3302E/MF U4 IC EEPROM 256 KBIT 10 MHz 8TSSOP Microchip Technology Inc. 25LC256-I/ST U5 IC MULT CONFIG 3.3/5V .12A 8MSOP Microchip Technology Inc. MCP1253-33X50I/MS U6 IC PWR DIST SWITCH SNGL SOT23-5 Texas Instruments TPS2051BDBVR U7 IC SWITCH LOAD FULL FUNC SOT23-5 Fairchild Semiconductor FPF2104 U9 IC FLASH 32 MBIT 8-pin SOIC Microchip Technology Inc. SST26VF032-80-5I-S2AE Y3 CRYSTAL 12.000000 MHZ 8 pF SMD NDK NX3225SA-12.000000MHZ Y4 OSC MEMS 24.000 MHz SMD Abracon Corporation ASDMB-24.000MHZ-LC-T Y5 OSC MEMS 50.000 MHz_1.8V ~3.3V SMD Abracon Corporation ASEMB-50.000MHZ-LC-T Keystone Electronics 5015 +3.3V_P- PC TEST POINT MINIATURE SMT KOB, GND DS70005147A-page 28  2013 Microchip Technology Inc. Bill of Materials TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS (CONTINUED) Reference Description bottom of board BUMPON CYLINDRICAL .375X.135 BLK 3M SJ61A8 Y1 CRYSTAL 24 MHz 8 pF SMD AVX CX3225GA24000D0PTVZ1 Y2 OSCILLATOR 32.768 kHz 3.3V SM Abracon Corporation TC25L5I32K7680 CAP CER 8 pF 50V NPO 0603 TDK Corporation C1608C0G1H080D080AA C36 CAP CER 10000 pF 50V X7R 0603 TDK Corporation C1608X7R1H103M R56 RES 1M OHM 1/8W 1% 0805 SMD Vishay Dale RMCF0805FT1M00 C34, C35  2013 Microchip Technology Inc. Manufacturer Part No. DS70005147A-page 29 PIC32MZ Embedded Connectivity (EC) Starter Kit User’s Guide NOTES: DS70005147A-page 30  2013 Microchip Technology Inc. NOTES:  2013 Microchip Technology Inc. DS70005147A-page 31 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 Austin, TX Tel: 512-257-3370 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Canada - Toronto Tel: 905-673-0699 Fax: 905-673-6509 DS70005147A-page 32 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Dusseldorf Tel: 49-2129-3766400 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Pforzheim Tel: 49-7231-424750 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy - Venice Tel: 39-049-7625286 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Poland - Warsaw Tel: 48-22-3325737 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 Taiwan - Kaohsiung Tel: 886-7-213-7830 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 10/28/13  2013 Microchip Technology Inc.