EMC6W201-AEZG

EMC6W201 Auto Fan Device with Piecewise Linear Control, Temperature Monitoring & Voltage Monitoring for Multi-Processor Systems PRODUCT FEATURES „ „ Data Brief 3.3 Volt Operation (5 Volt Tolerant Input Buffers) SMBus 2.0 Compliant Interface (Fixed, Not Discoverable) With Three Slave Address Options „ — Monitor Power supplies (+1.5V, +2.5V, +5V, VCC and two 1.5V VCCP) — Limit Comparison of all Monitored Values — Interrupt Pin for out-of-limit Voltage Indication — SMBus address change pin — SMBus address enable pin „ „ Auto-Fan Control with ProcHot Features — PWM (Pulse width Modulation) Outputs (3) — Low Frequency and High Frequency PWM Options (15kHz up to 30kHz) — Fan Tachometer or Lock Rotor Inputs (4) — Programmable automatic fan control based on temperature — Acoustic enhancement mode — ProcHot pins modulate Tmin — Fan RPM is a function of up to three temperatures and ProcHot signals — Piecewise linear fan control algorithm option „ Voltage Monitor ProcHot Input/Bi-directional Pins (2) — Selectable pins dedicated as input or input/output — Seperate ProcHot Output pin (FORCED_PR#) „ „ „ Power Good Output SMBus Alert Interrupt Output Register Characteristics — Individual enables/disables for each input — Two ISRs for each alert „ „ XOR Tree Test Mode Mechanical Package: 36-pin QFN, lead-free RoHS Compliant Temperature Monitor — Monitoring of up to Five Remote Thermal Diodes (+/- 3 deg C accuracy) — Internal Ambient Temperature Measurement — Limit Comparison of all Monitored Values — Interrupt Pin for out-of-limit Temperature Indication — Configurable offset for internal or external temperature channels. ORDER NUMBER: EMC6W201-AEZG FOR 36-PIN QFN LEAD-FREE ROHS COMPLIANT PACKAGE SMSC EMC6W201 PRODUCT PREVIEW Revision 0.3 (03-01-07) Auto Fan Device with Piecewise Linear Control, Temperature Monitoring & Voltage Monitoring for MultiProcessor Systems 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright © 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Revision 0.3 (03-01-07) 2 PRODUCT PREVIEW SMSC EMC6W201 Auto Fan Device with Piecewise Linear Control, Temperature Monitoring & Voltage Monitoring for MultiProcessor Systems General Description The EMC6W201 is an environmental monitoring device with automatic fan control capability and enhanced system acoustics for noise suppression. This ACPI compliant device provides hardware monitoring for up to six voltages (including its own VCC) and five external thermal sensors, measures the speed of up to five fans, and controls the speed of multiple DC fans using three Pulse Width Modulator (PWM) outputs. Note that it is possible to control more than three fans by connecting two fans to one PWM output. The EMC6W201 will be available in a 36-pin QFN, lead-free RoHS Compliant package. The EMC6W201 includes support for monitoring six thermal sensors: five external and one internal. The external temperatures are measured via thermal diode inputs capable of monitoring remote devices. In addition, it is equipped with an ambient temperature sensor for measuring the internal temperature. The EMC6W201 hardware monitor provides analog inputs for monitoring external voltages of +1.5V, +2.5V, +5V, and two Vccp voltages. This device has the capability to monitor its own internal VCC power supply, which may be connected to either main power (VCC) or the suspend power well (VTR). External components are not required for voltage scaling or similar treatment. Pulse Width Modulators (PWM) will control the speed of the fans by varying the output duty cycle of the PWM. The Ramp Rate Control feature controls the rate of change of the PWM output, thereby reducing system noise created by changing the fan speed. The speed of each fan is monitored by a Fan Tachometer input. The measured values are compared to values stored in Limit Registers to detect if a fan has stalled or seized. Fan speed may be under host software control or automatic. In host control mode, the host software continuously monitors temperature and fan speed registers, makes decisions as to desired fan speed and sets each PWM to drive the required fan speed. The PWM frequency is adjustable up to 30kHz. The EMC6W201 device offers an interrupt output signal (INT#), which may be used to interrupt the host on out-of-limit temperature or voltage condition enabling an ACPI response as opposed to the host software continuously monitoring status. In auto “zone” mode, the EMC6W201 logic continuously monitors the temperature and fan speeds and adjusts speeds without intervention from the host CPU. Fan speed is adjusted according to an algorithm using the temperature measured in the selected zone, the high and low limits set by the user, and the current fan speed. The part can automatically adjust its operation based on its environment for improved acoustic behavior. Overview The EMC6W201 device is an intelligent fan control system with reduced overall acoustic noise features. The EMC6W201 monitors voltages, external temperatures, and fan speeds. It uses this monitoring capability to alert the system to out of limit conditions and can automatically control the speeds of multiple fans. SMSC EMC6W201 3 PRODUCT PREVIEW Revision 0.3 (03-01-07) Auto Fan Device with Piecewise Linear Control, Temperature Monitoring & Voltage Monitoring for MultiProcessor Systems V1.5P1_IN FORCED_PR# PWRGD 5 6 7 SDAT NC 8 9 EMC6W201 36 PIN QFN 27 26 25 24 Remote5+ Remote5VSS VCC 23 22 21 PROCHOT_IO1# PROCHOT_IO2# TACH1 TACH2 20 19 10 11 12 13 14 15 16 17 18 1 2 3 4 NC NC SCLK INT#/SMBAlert# PWM3/Address Enable PWM2 PWM1/xTestOut TACH5 TACH4/Address Select TACH3 +1.5V_IN +5V_IN +2.5V_IN V1.5P2_IN 36 35 34 33 32 31 30 29 28 NC Remote1+ Remote1Remote2+ Remote2Remote3+ Remote3Remote4+ Remote4- Pin Configuration Figure 1 EMC6W201 Pin Configuration Revision 0.3 (03-01-07) 4 PRODUCT PREVIEW SMSC EMC6W201 REVISION HISTORY D D2 D1 3 TERMINAL #1 IDENTIFIER AREA (D/2 X E/2) e TERMINAL #1 IDENTIFIER AREA (D1/2 X E1/2) E1 E E2 EXPOSED PAD 0.6(MAX) DESCRIPTION DATE RELEASED BY - SEE SPEC FRONT PAGE FOR REVISION HISTORY - - 3 4 36X L 0.6(MAX) CHAMFERED CORNERS ARE OPTIONAL 4X REVISION 36X 0.2 MIN TOP VIEW 36X b 2 BOTTOM VIEW 5 PRODUCT PREVIEW 4X 0°-12° C 4 A2 ccc C A A1 A3 SIDE VIEW D2 / E2 VARIATIONS CATALOG PART 3-D VIEWS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND TOLERANCES ARE: SMSC EMC6W201 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETER. 2. POSITION TOLERANCE OF EACH TERMINAL IS ± 0.05mm AT MAXIMUM MATERIAL CONDITION. DIMENSIONS "b" APPLIES TO PLATED TERMINALS AND IT IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM THE TERMINAL TIP. 3. DETAILS OF TERMINAL #1 IDENTIFIER ARE OPTIONAL BUT MUST BE LOCATED WITHIN THE AREA INDICATED. 4. COPLANARITY ZONE APPLIES TO EXPOSED PAD AND TERMINALS. DECIMAL X.X ±0.1 X.XX ±0.05 X.XXX ±0.025 THIRD ANGLE PROJECTION 80 ARKAY DRIVE HAUPPAUGE, NY 11788 USA ANGULAR ±1° TITLE NAME DIM AND TOL PER ASME Y14.5M - 1994 MATERIAL FINISH - PRINT WITH "SCALE TO FIT" DO NOT SCALE DRAWING DATE DRAWN S.K.ILIEV 12/6/04 CHECKED S.K.ILIEV DWG NUMBER STD COMPLIANCE SCALE 12/6/04 Figure 2 EMC6W201 36-Pin QFN Package Outline REV MO-36-QFN-6x6 12/6/04 APPROVED S.K.ILIEV PACKAGE OUTLINE 36 TERMINAL QFN, 6x6mm BODY, 0.5mm PITCH 1:1 JEDEC: MO-220 F SHEET 1 OF 1 Auto Fan Device with Piecewise Linear Control, Temperature Monitoring & Voltage Monitoring for Multi-Processor Systems Revision 0.3 (03-01-07) Package Outline