EVB-LAN9218I-MINI

Connectivity Solutions Connectivity Solutions for Embedded Design USB, Ethernet, Wi-Fi®, Bluetooth®, ZigBee®, MiWi™ Wireless Networking Protocol, IoT, CAN, LIN, IrDA® and RS-485 Protocols www.microchip.com/connectivity Embedded Wireless Solutions Targeting the Need for Low-Power Wireless Connectivity Wireless communication technologies have been commonplace in homes and industry for many years. Recent trends in cloud computing, Internet of Things (IoT) and Smart Grid initiative have created a renewed demand for standardized, lowpower wireless technology in metering, home, business and industrial automation markets. As a result, Microchip offers many IEEE 802.11™, IEEE 802.15.4™ and ZigBee® standard solutions along with our proprietary MiWi™ wireless networking protocol for both 2.4 GHz and Sub-GHz to address this need. Wi-Fi® IEEE 802.11 MRF Wi-Fi Series Microchip has a broad portfolio of Wi-Fi products including complete agency-certified 802.11 b/g modules, 802.11 b/g Wi-Fi transceivers and RF chipset solutions that make adding Wi-Fi simple. Our modules include full TCP/IP stacks and networking services in compact surface mount components, saving you development time and testing cost. ■ Low power for battery-powered applications ■ Regulatory agency-certified ■ WEP, WPA1, WPA2, WPA-EAP Security ■ Supports SoftAP, Ad hoc and Infrastructure networking modes ■ Supports WPS, FTP, HTTP, DHCP, Wi-Fi Direct and more ■ Over-the-air firmware upgrade MRF24WB0MA/MB, MRF24WG0MA/MB RN Wi-Fi Series RN171, RN131 Modules ■ Full on-board TCP/IP stack and services (no external drivers required or royalties) ■ Simple ASCII command interface ■ Works with any microcontroller RN171 Wi-Fi Evaluation Kit (RN-171-EK) The RN-171-EK is an 802.11 b/g Wi-Fi evaluation kit for the RN171 module. It can be used to quickly add Wi-Fi connectivity to embedded applications. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL/UART interface. The board includes two convenient pushbuttons for controlling both SoftAP and WPS modes without software configuration. The status LEDs and jumpers enable rapid prototyping and integration into existing systems. RN171 Wi-Fi PICtail™/PICtail Plus Daughter Board (RN-171-PICtail) The RN-171-PICtail allows you to easily develop Wi-Fi applications using Microchip’s 8-, 16- and 32-bit PIC® microcontrollers. It includes a fully integrated TCP/IP stack allowing for a simple serial-to-Wi-Fi connection to the microcontroller. ■ Royalty-free TCP/IP stack and services on PIC microcontroller ■ Full service implementations for web server, email, FTP ■ IPv4 and IPv6 support Wi-Fi G Demo Board (DV102412) The Wi-Fi G Demo Board is a compact demonstration platform which allows you to easily evaluate and configure the fully certified MRF24WG0MA 802.11 b/g Wi-Fi module. The demo board is a fully functional standalone web server powered by two AAA batteries. It comes with the MRF24WG0MA Wi-Fi module connected to a PIC32 with TCP/IP stack preconfigured to serve web pages and show SoftAP, Wi-Fi Direct client and WPS functions. MRF24WG0MA Wi-Fi G PICtail/PICtail Plus Daughter Board (AC164149) The MRF24WG0MA Wi-Fi PICtail/PICtail Plus Daughter Board is a demonstration board for evaluating Wi-Fi connectivity using PIC microcontrollers and the MRF24WG0MA module.This product is compatible with the Explorer 16 Development Board (DM240001), PICDEM.net™ 2 Development Board (DM163024) and PIC32 Starter Kit (DM320001) with I/O Expansion Board (DM320002). More information is available at: www.microchip.com/wifi. WCM Development Kit 1 (DM182020) The Wi-Fi Client Module (WCM) Development Kit 1 is designed to enable you to quickly and easily connect an embedded system to a cloud-based server, such as Amazon Web Services (AWS). This will reduce the learning curve and help you get connected to the cloud quickly. This entire ecosystem can be se tup in a matter of a few minutes by launching Microchip's Amazon Machine Image (AMI) via the AWS Marketplace, commissioning the development kit to connect to your local Wi-Fi router and run the demo. More information is available at: www.microchip.com/iot. www.microchip.com/wireless 2 Connectivity Solutions Embedded Wireless Solutions Targeting the Need for Low-Power Wireless Connectivity Certified Bluetooth® Modules RN52 Module Bluetooth is finding a home in multiple new markets thanks to the Smartphone and other mobile devices. Microchip recognizes the value of Bluetooth connectivity and is leading the way with low-power Bluetooth solutions designed for drop-in connectivity. ■ Bluetooth 4.1 Low Energy (BTLE) module with complete on-board stack ■ Bluetooth Classic 2.1 + EDR and 3.0 (audio only) compact surface mount modules ■ Class 1 and Class 2 modules with an onboard stack, multiple embedded Bluetooth profiles and a simple ASCII command interface ■ Work seamlessly with Android™ and iPhone® devices RN52 Audio Bluetooth Evaluation Kit (RN-52-EK) RN4020 Bluetooth Low Energy Module ■ Fully certified Bluetooth version 4.1 module ■ On-board embedded Bluetooth low energy stack ■ Simple ASCII command interface over UART ■ Data streaming with Microchip's Low Energy Data Profile (MLDP) ■ Scripting for stand-alone module operation with analog and digital data collection RN4020 PICtail/PICtail Plus Daughter Board (RN-4020-PICTAIL) ■ For flexible development with the RN4020 BTLE module ■ Connection and data status LEDs ■ USB to UART interface to quickly get started ■ PICtail and PICtail Plus interfaces for connection to Microchip development boards ■ eXtreme Low Power PIC18F25K50 MCU on board ■ PICkit™ serial programmer/debugger interface RN41/RN42 Modules ■ Low-power embedded modules ■ On-board embedded Bluetooth stack (no host processor required) ■ Supports SPP, HID, HCI, iAP ■ UART data connection hardware interface ■ Auto-discovery/auto-connect requires no software configuration (instant cable replacement) RN42 Bluetooth Evaluation Kit (RN-42-EK) The RN-42-EK is a fully certified Class 2 Bluetooth evaluation kit for the RN42 module. It has the flexibility to connect directly to a PC via a standard USB interface or to embedded processors through the TTL UART interface. The status LEDs, switches and signal headers enable rapid prototyping and integration into existing systems. ■ Fully certified Bluetooth version 3.0 audio module, fully compatible with Bluetooth version 2.1 + EDR, 1.2, and 1.1 ■ Software configurable through commands over UART console interface ■ Embedded Bluetooth stack profiles: SPP, A2DP, HFP/HSP, and AVRCP ■ Enables Audio streaming from iPhone, iPod®, iPad® and Android smartphones and accessories ■ Additional support for codecs such as aptX®, AAC, MP3, and others ■ Based on RN52 Bluetooth audio module ■ Demonstrates key features of RN52 module for embedded systems ■ Allows designers to develop prototypes and proof of concept ■ USB port to supply power and access to command interface ■ Built-in amplifier for stereo audio output and six function buttons More information is available at: www.microchip.com/bluetooth. PIC32 MCU Plus Bluetooth PIC32 Bluetooth Starter Kit (DM320018) The PIC32 Bluetooth Starter Kit is a lowcost Bluetooth development platform featuring the PIC32MX270F256D MCU. This kit features an HCI-based Bluetooth radio, pushbuttons, Cree high-output multi-color LED, standard single-color LEDs, accelerometer, temperature sensor and GPIO for rapid development of Bluetooth data-based Serial Port Profile (SPP) applications. PIC32 Multimedia Expansion Board II (DM320005-2) ■ ■ ■ ■ ■ ■ ■ ■ ■ The Multimedia Expansion Board II (MEB-II) is a highly integrated, compact and flexible development platform which works with the PIC32MZ Starter Kit. ■ Low-cost Bluetooth HCI transceiver 24-bit stereo audio codec Integrated 802.11 b/g wireless module Optional EBI SRAM memory 4.3" WQVGA PCAP touch display daughter board microSD™ slot mTouch® sensing solutions buttons Analog temperature sensor VGA camera PICtail connector www.microchip.com/wireless Connectivity Solutions 3 Embedded Wireless Solutions Targeting the Need for Low-Power Wireless Connectivity PIC32 Bluetooth Audio Development Board (DV320032) ■ ■ ■ ■ ■ ■ ■ The PIC32 Bluetooth Audio Development kit provides a comprehensive solution to develop Bluetooth A2DP audio streaming applications. ■ PIC32MX450/470 MCU HCI Bluetooth module Daughter Card (QDID-certified module) 16/24-bit, 32–192 kHz DAC/Amp Daughter Card USB Host/Device audio support USB charging 2 inch color LCD display Headphone/line out Audio control function Bluetooth/USB Audio Software Support for: ■ Apple®* ■ Samsung™ audio ■ Google®/Android AOA Audio ■ Bluetooth Audio with SBC and AAC Decode ■ Bluetooth Stack QDID-Certified Microchip offers three Bluetooth audio software suites: ■ PIC32 Bluetooth SBC only Audio Software Suite ■ PIC32 Bluetooth SBC and AAC Decoder Audio Software Suite ■ PIC32 Bluetooth Break-In Mode with SBC Audio Software Suite The Advanced Audio Distribution Profile (A2DP), Audio/ Video Remote Control Profile (AVRCP), Serial Port Profile (SPP), and Service Discovery Protocol (SDP)—provided in the binary form—are common to all the three suites. This Bluetooth binary code is combined with application source code for operation on the PIC32 Bluetooth Audio Development Kit (DV320032). Additional software support is included in the latest version of suites for: ■ Parametric and Graphical Equalizer functions ■ User-configurable voice prompts ■ User-configurable button press ■ Removed RTOS requirement Wi-Fi: RN171XV ■ ■ ■ ■ Bluetooth: RN41XV/RN42XV ■ Agency-certified Bluetooth module, supports version 2.1 + EDR ■ UART (SPP) data connection interface ■ Embedded Bluetooth stack profiles included: SPP, HID, HCI ■ Multiple antenna options available: (RN41) Chip antenna, U.FL connector, (RN42) PCB trace antenna ZigBee IEEE 802.15.4: (2.4 GHz) MRF24XA, MRF24J40/MA/MC/MD Modules Microchip offers ZigBee-certified platforms for ZigBee PRO and ZigBee RF4CE protocol stacks, ensuring interoperability and reliable communication. ■ ZigBee PRO Stack ■ Smart Energy Profile ■ ZigBee RF4CE and ZRC Profile ■ 2.4 GHz IEEE 802.15.4 compatible transceivers and modules ■ FCC, IC and ETSI agency certified ■ Supports ZigBee and MiWi wireless networking protocol development environment More information is available at www.microchip.com/zigbee. Sub-GHz Solutions: (433/868/915/950 MHz) MRF49XA/MRF89XA/M8A/M9A Modules Microchip's Sub-GHz MRF modules are designed to bring simplicity to RF design along with regional regulatory certification. The modules target the lowest-cost proprietary radio link market and offer industry-leading characteristics including low power and large link budgets. *For Apple USB Authenticated applications contact applesupport@microchip.com. XBee®-Compatible Wi-Fi and Bluetooth Socket Modules Some designers want an easy way to migrate their 802.15.4 designs to either Wi-Fi or Bluetooth to make them accessible from smartphones and tablets or to add Internet connectivity. The RNXV series of Wi-Fi and Bluetooth socket modules provide agency-certified drop-in connectivity for any XBee socket. To simplify designs, the stacks are integrated on the module, configured via simple ASCII commands and can easily connect to any MCU via a serial interface. 4 Connectivity Solutions Direct Internet connectivity Full 802.11 b/g data rate support On-board TCP/IP stack SoftAP and infrastructure modes ■ ■ ■ ■ ■ ■ ■ ■ 433/868/915/950 MHz transceiver and modules Low receive current = 3 mA Transmit power = +12.5 dBm Receiver sensitivity: −107 dBm FSK/−113 dBm OOK Integrated PCB antenna and matching circuit components FCC, IC and ETSI agency certified Surface-mountable PCB Supports MiWi wireless networking protocol development environment Embedded Wireless Solutions Targeting the Need for Low-Power Wireless Connectivity MRF89XAM8A PICtail/PICtail Plus Daughter Board (AC164138-1) and MRF89XAM9A PICtail/PICtail Plus Daughter Board (AC164138-2) Targeted for the MiWi Protocol Development Environment and other proprietary wireless protocol applications, the MRF89XAM8A/9A PICtail/PICtail Plus Daughter Board is a demonstration and development daughter board for the MRF89XAM8A/9A, an ETSIcertified 868/915 MHz radio transceiver module. The module is surface mounted to a PICtail/PICtail Plus daughter board that plugs into multiple Microchip demonstration and development boards like the PICDEM™ PIC18 Explorer Board (DM183032) for 8-bit microcontroller development, or the Explorer 16 Development Board (DM240001) for 16-bit and 32-bit microcontroller development. MRF24J40MA PICtail/PICtail Plus (AC164134-1) The MRF24J40MA PICtail/PICtail Plus Daughter Board is a demonstration and development daughter board for the MRF24J40MA IEEE 802.15.4, 2.4 GHz RF Transceiver module. The daughter board plugs into multiple Microchip demonstration and development boards, including the PIC18 Explorer Board (DM183032) for 8-bit microcontroller development or the Explorer 16 Development Board (DM240001) for 16-bit and 32-bit microcontroller development. MRF24XA PICtail/PICtail Plus Daughter Board (AC164152-1) MiWi Wireless Networking Protocol Development Environment The MiWi Wireless Networking Procotol Development Environment is designed to provide a smaller-footprint, lower-resource communication protocol stack for peerto-peer and mesh wireless networks. It is intended for customers who desire robust communication in a closed or private wireless network at either 2.4 GHz or Sub-GHz operation frequency. ■ MiWi Wireless Networking Protocol P2P ■ MiWi Wireless Networking Protocol ■ MiWi Wireless Networking Protocol PRO More information is available at: www.microchip.com/miwi. MiWi Wireless Networking Protocol to Wi-Fi Wireless Demo Kit (DM182018) The MiWi Wireless Networking Protocol to Wi-Fi Wireless Demo Kit allows you to evaluate and experiment with MiWi wireless networking protocol to Wi-Fi gateway solutions. The kit includes a wireless evaluation board with both MiWi wireless networking protocol and Wi-Fi transceivers. It also includes two MiWi wireless networking protocol demo boards to create a three-node MiWi wireless networking protocol network. The MiWi Wireless Networking Protocol to Wi-Fi Demo Kit is pre-programmed with a wireless demo program, which demonstrates how to commission and control the MiWi wireless networking protocol P2P network from a web browser. The MRF24XA PICtail/PICtail Plus Daughter Board is a demonstration and development daughter board for the MRF24XA lowpower, 2.4 GHz, ISM-Band IEEE 802.15.4 RF Transceiver. The daughter board plugs into multiple Microchip demonstration and development boards, including the PIC18 Explorer Board (DM183032) for 8-bit microcontroller development or the Explorer 16 Development Board (DM240001) for 16-bit and 32-bit microcontroller development. The Wireless Development Studio (WDS) Integrated MCU + RF Remote Control Demo Board (DM240315-2) Low-power Sub-GHz transmitters with PIC MCUs in a single package for remote keyless entry, garage door openers, remote control and other one-way communication applications. ■ PIC12F529T48A/39A ■ PIC12LF1840T48A/39A ■ PIC16LF1824T39A The WDS is a Java-based Graphic User Interface (GUI) which allows quick and easy development of wireless applications based on the MiWi wireless networking protocols. It features a MiWi wireless networking protocol sniffer for monitoring, debugging and gathering information and a configurator with a GUI to enable simple customization and configuration of wireless networks. Development Tools This board integrates graphics, mTouch technology, USB and RF4CE into a single demo. It features the PIC24FJ256DA210 MCU, a 3.5" graphical TFT LCD with resistive touch screen, capacitive touch keys with plastic overlay, MRF24J40 2.4 GHz transceiver and ZENA™ wireless adapter. More information is available at: www.microchip.com/security. Connectivity Solutions 5 USB Connectivity Solutions Scalable Integrated USB Solutions The consumers’ desire for more engaging, easy-to-use and upgradeable products is driving embedded designers to add USB capabilities to their designs. Microchip provides a scalable choice of integrated USB solutions across 8-, 16- and 32-bit PIC microcontrollers ranging from space-saving 14-pin devices to featurerich 144-pin USB On-the-Go (OTG) products. This allows simple, compact designs to be easily expanded to offer more capabilities as requirements demand. In addition, Microchip offers highly configurable standalone USB converters, hubs, transceivers, switches, bridges, security controllers and microcontrollers ideal for applications like digital audio, smartphones, Flash media controllers, power delivery and charging, cameras, GPS, gaming, medical devices, networking and set-top boxes. Microchip provides free source code for USB software stacks and class drivers to shorten development time for USB applications, including thumb drive bootloaders and printer support. Supported classes include audio, CDC, HID, MSD, printer and custom. Microchip’s free USB host stack, device stack and class drivers are available at: www.microchip.com/usb. PIC16F and PIC18F Family ■ ■ ■ ■ ■ ■ Full-speed USB Device mode 8–128 KB Flash, 512B–4 KB of RAM, Up to 16 MIPS 8-bit devices Up to four UARTs, two I2C™/SPI ports Available in 14 to 100-pin packages Crystal-free options available PIC24 Family ■ ■ ■ ■ ■ ■ Full-speed USB Device, Host and OTG modes 32–512 KB Flash, 8–96 KB RAM 16 to 70 MIPS 16-bit devices Up to four UARTs, three I2C and four SPI ports DMA interface for data RAM access, display drivers Available in 28/44/64/80/100/144-pin packages PIC32MX Family ■ Full-speed USB Device, Host and OTG modes with dedicated DMA Channels ■ 16–512 KB Flash, 4–128 KB RAM ■ 40, 50, 80 and 100 MHz MIPS® M4K® Core ■ 10/100 Ethernet MAC with MII/RMII interface and up to two CAN 2.0B ports ■ Up to six UARTs, five I2C, four SPI ports, two I2S™ and CTMU ■ Up to eight general purpose DMA channels ■ Available in 28/36/44/64/100/124-pin packages www.microchip.com/usb 6 Connectivity Solutions PIC32MZ Family ■ High-speed USB 2.0 Device, Host and OTG modes with dedicated DMA Channels ■ 1–2 MB Flash, 512 KB RAM ■ 200 MHz microAptiv™ Core ■ 10/100 Ethernet MAC with MII/RMII interface and up to two CAN 2.0B ports ■ Up to six UARTs, five I2C, six SPI/I2S ports ■ Up to eight general purpose DMA channels and up to 18 channels of dedicated DMA ■ External Bus Interface (EBI), Serial Quad Interface (SQI) and Crypto Engine ■ Available in 64/100/124/144-pin packages dsPIC33E Family ■ Full-speed USB Device, Host and OTG modes ■ 256–512 KB Flash, 32–52 KB RAM, 70 MIPS 16-bit devices ■ Four UARTs, two I2C and four SPI ports with motor control and digital power peripherals ■ Available in 64/100/144-pin packages Stand-alone USB Converters ■ MCP2200 (USB to UART) and MCP2210 (USB to SPI) bridge devices allow for an easy and cost-effective way to add USB to existing designs. These highlyconfigurable products support full-speed, on-board EEPROM and up to nine GPIOs. USB Connectivity Solutions Stand-alone and Integrated USB Solutions from Low-Cost Devices to Complex SuperSpeed USB USB technology can be found in practically all applications and markets—from consumer to industrial to automotive segments. The extreme proliferation of USB has even led to the adoption of the technology as a high-bandwidth embedded chip-to-chip interface. Microchip enables seamless USB connectivity by delivering integrated value-rich solutions such as USB hub controllers, power delivery and charging, transceivers/switches, Flash media controllers and security solutions. PLL USB 2.0 PHY USB 2.0/3.0 PHY Controller USB 2.0 Port 7 USB 2.0 Port 6 USB 2.0/3.0 PHY USB 2.0/3.0 PHY USB24XX/USB25XX/USB350X/USB380X/ USB3X13/USB553X Families ■■   USB-IF-compliant Hi-Speed USB 2.0 and SuperSpeed USB 3.0 solutions ■■   Integrated controller providing integrated, easy-to-use controller proividing flexible programmability ■■   Small, highly-integrated and low-power hub solutions offered specifically for mobile applications ■■   Multi-port solutions with battery charger detection ■■   Unique system optimization features including PHYBoost, VariSense™ and flexConnect USB Security RAM AES SD2 Flash Media DMA Unit USB Power Switch UVLO, OVLO VBUS Interface Temp. Control/ Measure UCS100X Family ■■   Port power switch capable of supporting up to 2.5A for continuous current ■■   Up to nine preloaded charger emulation profiles with full programmability to customize profiles ■■   Integrated current sensor to optimize charging experience and algorithms ■■   Extremely low-power sleep mode Note: UCS1002 may require an NDA. USB Transceivers and Switches Processor USB MAC/ SIE Charger Detection ULPI Transceiver USB Switch Various levels on integration offered USB Accy USB333X/USB334X/USB374X/USB375X Families ■■   ULPI-standard interface to transceivers ■■   Compliant Hi-Speed USB 2.0 switch technology for USB port sharing ■■   Battery charger detection integrated ■■   Smallest package option available, ideal for mobile applications GPIO SPI USB Flash Media Controllers SD1 SD1 SC USB Port 1 SMART CARD UART MUX Processor USB 2.0 HS ARM Processor USB 2.0 HS Data Switch and Charger Emulator SD2 Smart Card USB HS Device Controller USB SPI USB Port 2 Processor JTAG USB 2.0/3.0 Hub Controller USB 3.0 Port 2 USB 2.0/3.0 PHY USB 2.0/3.0 PHY USB 3.0 Port 1 Processor Embedded 8051 µC USB 2.0 Port 5 USB 2.0 PHY USB 3.0 Port 4 I2C™/SPI/GPIO Controller USB 3.0 Port 3 USB 2.0 PHY Processor USB Power Delivery and Battery Charging I2C™/SPI/GPIO Battery Charger USB Hub Controllers SD/MMC/SDIO USB/HSIC 3-Port Hub SD/MMC MS Memory SEC11XX/SEC12XX/SEC24XX/SEC44XX Families ■■   Multiple standard smart card interfaces including ISO/IEC7816 ■■   Flexible host interfaces supported including USB, SPI and UART ■■   Hardware-level key management and AES encryption ■■   Extremely fast, optimized and secure data transfers with no firmware intervention xD USB22XX/USB26XX/USB46XX Families ■■   Secure Digital (SD™)/microSD™, Embedded MultiMediaCard (eMMC™)/MultiMediaCard™ (MMC), Memory Stick®(MS)/ MS Pro™/MS Pro-HG™, xD-Picture Card™ (xD) ■■   Card speed technology for maximum data throughput ■■   Integrated USB hub ports for highest integration ■■   Flexible interfaces to processor including USB and HSIC www.microchip.com/usb Connectivity Solutions 7 USB Development Tools and Software Support Supporting USB Development from Concept to Prototype Microchip’s support for USB applications includes MPLAB® X Integrated Development Environment (IDE) tools for all USB PIC MCUs, peripheral applications for the 8-bit PIC16F and PIC18F families, and device, embedded host and OTG applications for the 16-bit PIC24F, PIC24E and dsPIC33E and 32-bit PIC32 families. Designers can use Microchip’s free USB stacks—including class drivers, 16- and 32-bit file system drivers and SCSI interface drivers—which are provided in source code form. More information is available at: www.microchip.com/usb. Additional software support includes full C and RTOS development environments. Also available are TCP/IP stacks, graphics libraries and ZigBee software stacks, which allow USB functionality to be combined with other capabilities to support a variety of designs. More information is available at: www.microchip.com/mla. More information about USB Software for PIC32 is available at: www.microchip.com/harmony. USB Starter Kits These development kits provide an easy, low-cost way to evaluate the functionality of Microchip’s 8-, 16- and 32-bit USB microcontrollers. Each all-inclusive kit contains the hardware, software and code examples necessary to take your next USB design from concept to prototype. Low Pin Count USB Development Kit (DV164127-2) This is a development kit for PIC16F145X, PIC18F14K50 and PIC18F13K50 14- and 20-pin USB microcontrollers. Included in the kit are PIC MCU samples, code examples and all necessary hardware and software. PIC18 Starter Kit (DM180021) This kit features a PIC18F46J50 MCU and includes on-board debugger/programming capability as well as USB communication, a capacitive touch pad, potentiometer, acceleration sensor, MicroSD memory card and an OLED display. The board can function as a USB mouse, joystick or mass storage device (thumb drive) all using the on-board capacitive touch sense pads. MPLAB Starter Kit for PIC24F (DM240011) This kit provides an inexpensive way to evaluate the 16 MIPs PIC24FJ256GB110 with USB-OTG. Application demonstrations include mTouch capacitive sensing, driving an OLED display and USB-OTG to store data to a thumb drive. PIC32 USB Starter Kit II (DM320003-2) This kit provides the easiest and lowest-cost method to experience the USB and CAN functionality of PIC32 microcontrollers. You can develop CAN applications using PIC32 expansion boards. The board contains everything you need to develop USB embedded Host/ Device/OTG applications when combined with Microchip's free USB software. www.microchip.com/usb 8 Connectivity Solutions MPLAB Starter Kit for PIC24F Intelligent Integrated Analog (DM240015) The MPLAB Starter Kit for PIC24F Intelligent Integrated Analog is a stand-alone board showcasing the advantages of lower BOM cost, faster throughput and lower noise analog, and features an on-board programmer/ debugger. The board demonstrates these features of the PIC24FJ128GC010 Microcontroller: direct LCD drive, 16-bit Sigma-Delta ADC, 12-bit Pipeline ADC, 10-bit DAC, op amps, CTMU, DMA, USB and XLP low power consumption. PIC32 USB Starter Kit III (DM320003-3) The PIC32 USB Starter Kit III provides you with an easy and cost-effective option to experience the USB, mTouch and SPI/ I2S functionality of PIC32MX3/MX4 microcontrollers. The board comes equipped with everything that is needed to develop USB embedded host/device/OTG applications, including Microchip's free USB software. Note: Additional PIC32 Starter Kits that support USB and Ethernet are listed in the Ethernet Development Tools section. FS USB Plug-In Module (PIM) Demo Boards These full-speed USB demonstration and development boards feature the PIC18FXXJ50 8-bit MCUs. The boards can be operated either stand-alone or as a PIM plugged into the PICDEM PIC18 Explorer board (DM183032). PIC18F46J50 FS USB PIM Demo Board (MA180024) PIC18F47J53 FS USB PIM Demo Board (MA180029) The PIC18F46J50 and PIC18F47J53 FS USB PIM demo boards are full-speed USB demonstration and development boards featuring the PIC18F46J50 and PIC18F47J53 respectively. PIC18F87J94 FS USB Demo Board (MA180033) The PIC18F87J94 FS USB PIM demo board is a full-speed USB demonstration and development board featuring the PIC18F87J94. USB Development Tools and Software Support Supporting USB Development from Concept to Prototype Explorer 16 Development Platform Combine the Explorer 16 low-cost modular development board with the USB PICtail Plus daughter board for easy USB development with 16- and 32-bit MCUs. Several different PIMs are available to allow development with a variety of MCU platforms. Explorer 16 Development Board (DM240001) Use this efficient, low-cost development board to evaluate the features and performance of Microchip’s 16-bit PIC24F and PIC24H MCU, dsPIC33 DSC and 32-bit PIC32MX families. Interface with the MPLAB ICD 3 In-Circuit Debugger or MPLAB REAL ICE™ In-Circuit Emulator to speed evaluation and prototyping of application circuitry. USB PICtail Plus Daughter Board (AC164131) This module enables USB hardware connectivity when using an Explorer 16 and USB-capable PIM. It provides support for USB Device, Host and OTG development. Plug-In Modules Various PIMs are available for use with the Explorer 16 Development Board. Individual PIMs feature different PIC24F, PIC24E and PIC32 microcontrollers and dsPIC33E digital signal controllers with USB modules. USB Evaluation Boards MCP2210 Evaluation Kit (ADM00421) The MCP2210 Evaluation Kit is a development and evaluation platform for the MCP2210 USB-to-SPI stand-alone device. USB Hub Controller Evaluation Boards USB3613/USB3813 Mobile Hi-Speed USB 2.0 Programmable 3-Port Controller Hub (EVB-USB3613/EVB-USB3813) The EVB-USB3613 and EVB-USB3813 are used to evaluate the USB31X13 family of programmable controller hubs for mobile applications. The difference between the USB3613 and the USB3813 is the upstream port—USB3613 has an HSIC interface, and the USB3813 has a USB interface. Both versions are offered in an extremely small package. USB4604 Hi-Speed USB 2.0 Programmable 4-Port Controller Hub with FlexConnect and I/O Bridging (EVB-USB4604) The EVB-USB4604 is used to evaluate the full-featured USB46X4 family of programmable controller hubs. It features full programmability and unique features such as FlexConnect and I/O Bridging. USB2534 Hi-Speed USB 2.0 Programmable 4-Port Controller Hub (EVB-USB2534) The EVB-USB2534 is used to evaluate the USB253X family of programmable controller hubs. This solution not only provides the flexibility to optimize hub functionality, but also integrates LPM power savings and USB battery charger detection on all ports. USB2514B Hi-Speed USB 2.0 Multi-TT 4-Port Hub with Battery Charging Support (EVB-USB2514BC) The USB2514B MultiTRAK™ Hub Controller is a low-power, full-featured, OEM-configurable Hi-Speed USB 2.0-compliant hub with four downstream ports. Each of these downstream ports in the USB2514B device is capable of supporting battery charging per the USB Battery Charging Specification. USB3503 HSIC to USB 2.0 3-Port Hub for Portable Applications (EVB-USB3503) The EVB-USB3503 is used to evaluate our extremely small-size USB3503 hub which is ideal for portable applications. Many processors serving the mobile market have adopted HSIC as a standard interface, and this solution allows for both external USB 2.0 connectivity as well as an embedded interface in mobile products. USB3803 Hi-Speed USB 2.0 3-Port Hub for Portable Applications (EVB-USB3803) The EVB-USB3803 is used to evaluate our extremely small-size USB3803 hub, which is ideal for portable applications. The USB3803 is similar to the USB3503 except that this device has a USB 2.0 upstream interface instead of HSIC. Some system architects prefer to use USB 2.0 and this solution provides an adaptable equivalent. USB553X SuperSpeed USB 3.0 7-Port Hub Controller (EVB-USB5537) The EVB-USB5537 is used to evaluate the USB553X family of SuperSpeed USB 3.0 hub controllers. This solution is offered in different port configurations and provides some unique features such as PHYBoost and VariSense to optimize USB system design. It also incorporates battery charging detection on all downstream USB ports. www.microchip.com/usb Connectivity Solutions 9 USB Development Tools and Software Support Supporting USB Development from Concept to Prototype Power Delivery and Battery Charging Evaluation Boards USB Port Power Controller with Charger Emulation (ADM00497) The EVB-UCS1002 is used to evaluate our UCS100X USB Port Power Controller solutions. USB ports are used for not only USB data, but also for USB battery charging. The UCS100X provides up to nine preloaded and one programmable charger emulation profiles, an integrated current sensor and a power switch. It it capable of up to 2.5A of continuous current. Note: The UCS1002 may require an NDA. Transceiver/Switch Evaluation Boards USB3330 Hi-Speed USB 2.0 Transceiver with ULPI Interface in Smallest Package (EVB-USB3330) The EVB-USB3330 is used to evaluate our USB333X family of small, highly-integrated USB 2.0 transceivers with ULPI interface. The small WLCSP package makes the USB333X family an ideal solution for mobile and portable applications. It features multi-frequency reference clocks to adapt and share any common system reference clocks, and includes key features like RapidCharge Anywhere™, PHYBoost and VariSense for system optimization. USB3340 Hi-Speed USB 2.0 Transceiver with ULPI Interface (EVB-USB3340) The EVB-USB3340 is used to evaluate our USB334X family of highly integrated USB 2.0 transceivers with ULPI interface. The features and functions are identical to the USB333X family except the USB334X comes in a convenient, widely-used 32-pin QFN package. USB3740 Hi-Speed USB 2.0 2-Port Switch (EVB-USB3740) The EVB-USB3740 is used to evaluate our USB3740 USB 2.0 compliant 2-port switch. Some applications require a single USB port to be shared with other functions. The USB3740 is a small and simple 2-port switch providing system design flexibility. USB375X Hi-Speed USB 2.0 Port Protection with Integrated Switch and Charger Detection (EVB-USB3750) The EVB-USB3750 is used to evaluate our USB375X family of Integrated USB 2.0 Port Protection devices. The USB375X integrates a high level of ESD protection to the USB port, which is typically exposed to the harsh environment of the outside world. It also incorporates our Hi-Speed USB 2.0 switch as well as battery charger detection, all in a conveniently small package. www.microchip.com/usb 10 Connectivity Solutions Flash Media Controller Evaluation Boards USB2250 Ultra Fast Hi-Speed USB 2.0 Multi-Slot Flash Media Controller Evaluation Board (EVB-USB2250) The EVB-USB2250 is used to demonstrate the features of the USB2250, a stand-alone Hi-Speed Mass Storage Class Peripheral Controller intended for reading and writing to more than 24 popular Flash media formats from the CompactFlash® (CF), SmartMedia™ (SM), xD-Picture Card (xD), Memory Stick (MS), Secure Digital (SD) and MultiMediaCard (MMC) families. USB2640 USB 2.0 Port Hub with Ultra-Fast Flash Media Controller Evaluation Board (EVB-USB2640) The USB2640 is an Ultra-Fast USB 2.0 Hub, Flash media controller and protocol bridge combo. The EVB-USB2640 Evaluation Board demonstrates a stand-alone application for developers of applications such as Flash media card reader/writer, printers, desktop and mobile PCs, consumer A/V and flat panel displays. USB4640 HSIC 1.0 to USB 2.0 2-Port Hub with Ultra-Fast Flash Media Controller Evaluation Board (EVB-USB4640) The EVB-USB4640 Evaluation Board is for the USB4640 Hi-Speed HSIC USB hub and card reader combo solution. It has an upstream port compliant to HSIC 1.0 using dual UFL connectors, a supplement to the USB 2.0 specification. Security Evaluation Boards Smart Card Controllers with Flexible Interface Support (EVB-SEC1210) The EVB-SEC1210 is used to evaluate our SEC11XX/SEC12XX family of security products. These solutions' flexible host interface options include USB, SPI or UART and provide either single or dual smart card interfaces to ISO/IEC7816 specifications. Hi-Speed USB 2.0 Flash Media Controller with AEC Encryption and Integrated Smart Card Reader (EVB-SEC2410-SSD) The EVB-SEC2410-SSD is used to evaluate our SEC24XX/SEC44XX family of Flash Media Controller Security products. Hardware-level key management and AES encryption, as well as the high-performance hardware controller-Flash media data transfers—which require no firmware intervention—are fundamental features of these solutions. Ethernet Connectivity Solutions Complete Portfolio of Ethernet Products for Flexibility of Design A wide range of remote communication features are possible when Ethernet connectivity is added to embedded designs. For example, systems can be remotely monitored using a web browser or an email notification can be sent, triggered by service alerts or low product inventory. End users benefit from cost and time savings since they can centrally monitor, control and service their embedded systems over the Internet instead of being physically present. The Microchip Ethernet portfolio includes 10/100 Mbps and 10/100/1000 Mbps transceivers as well as 2- and 3port switches and integrated Ethernet controllers. These Ethernet products include enhanced features such as Energy Efficient Ethernet (IEEE 802.3az), Wake-on-LAN and cable diagnostics to bring high-performance connectivity to all your embedded designs. Microchip’s Ethernet solutions address the growing demand for embedded Ethernet products, enabling easy network connectivity for cost-sensitive embedded designs. ■■   Free and robust TCP/IP stack optimized for the PIC18, PIC24 and PIC32 microcontroller and dsPIC® digital signal controller families ■■   Supported protocols include HTTP, SMTP, SNMP, FTP, SNTP, SSL, TCP, UDP, IP, DHCP, DDNS, ICMP and ARP PIC18F97J60 Ethernet PIC Microcontroller ■■   PIC18F microcontroller with built-in Ethernet MAC and 10Base-T PHY ■■   8 KB dedicated Ethernet Buffer RAM ■■   Up to 128 KB Flash ■■   Advanced analog and communication peripherals ■■   Available in 64-, 80- and 100-pin TQFP packages PIC32MZ Embedded Connectivity PIC Microcontrollers • 200 MHz, 5-Stage Pipeline • 32-bit CPU + DSP Trace PIC32MX6XX, PIC32MX7XX Ethernet PIC Microcontrollers EJTAG JTAG 32-bit HW Mul/Div Instruction RMII/MII 32 Core Registers USB OTG CAN 2.0b C (2) 10/100 10 0/100 Eth hernet Ethernet M MAC 2 Ch. DMA 4 Ch. DMA 2 Ch. DMA DMA 8 Ch. Shadow Set S Data Prefetch Buffer Buff f er C h Cache 5112 KB 512 K Flash Flas F 128 KB SRAM Interrupt nterrupt ontroller Controller 28 Ch. 10-bit ADC Analog Comparators (3) Input Capture (5) I2C™ (5) Output Compare PWM (5) UART (6) 16-bit Timers (5) I2S/SPI (4) SQI High Hig Spee Speed USB B CAN 2.0b (2) Ethernet MAC 2 Ch. DMA 2 Ch. Ch h. DMA DM MA 8 Ch. Ch h DMA DM MA A 4 Ch. DMA 2 Ch. DMA 2 MB Flash Dual Panel Live Update 5122 KB B SR RAM SRAM PPS P PS PMP EBI EB BI Comparator (2) 10-b 10-bit ADC 4-Wire 4-W Wire Debug Deb Peripheral Buses POR Reset Output Compare PWM (9) Timer (9) IC (9) I2C™ (5) I2S/SP S/SPI (6) RTCC RT 2-Wire Debug VREG Peripheral Bus 16-bit Parallel Port Prefetch BOR BO Reset GP GPIO PIO (885) (85) Crypto g Engine High-Speed Bus Matrix WDT Bus Matrix D DMA 8 Ch. Data ® • 100 MHz,, 1.65 DMIPS/MHz • 5 Stage Pipeline Pipeline, 32-bit ALU Trace Data D Ca ache Cache Inst. In n nst. Ca ache Cache Instruction Instr ctio on M4K 32-bit Core ® MIPS32 microAptiv™ Core CTMU/ Temp Sense RTCC ■■   Integrated 10/100 Mbit Ethernet MAC ■■   Dedicated DMA interface for direct access to the entire system RAM ■■   Industry-standard RMII/MII interface to PHY ■■   Pre-programmed MAC address ■■   80 MHz, up to 512 KB Flash, up to 128 KB RAM ■■   Available in 64-pin (TQFP, QFN) and 100-pin (TQFP, BGA) packages ■■   Integrated 10/100 Mbps Ethernet MAC ■■   Dedicated DMA interface for direct access to the entire system RAM ■■   Industry-standard RMII/MII interface to PHY ■■   Pre-programmed MAC address ■■   High-speed USB, CAN 2.0B, Crypto Engine, SQI and EBI ports ■■   200 MHz, 1–2 MB Flash and 512 KB RAM ■■   Available in 64-pin (TQFP, QFN), 100-pin (TQFP), 124-pin (VTLA) and 144-pin (TQFP, LQFP) packages www.microchip.com/ethernet Connectivity Solutions 11 Ethernet Connectivity Solutions Complete Portfolio of Ethernet Products for Flexibility of Design ENC624J600, ENC424J600 Embedded Ethernet Controllers ENC28J60 Embedded Ethernet Controller ENC624J600 SPI/Parallel Interface dsPIC DSC ® 10/100 Mbps Ethernet TX/RX Buffer MAC www.microchip.com/ethernet Connectivity Solutions TX/RX Buffer MAC PHY PHY ■■   Integrated MAC and 10/100Base-T PHY ■■   24 KB transmit/receive buffer SRAM ■■   MCU Interface supported: SPI and 8/16-bit parallel ■■   Cryptographic Security Engines ■■   Pre-programmed unique MAC address ■■   Available in 44-pin (TQFP, QFN) and 64-pin (TQFP) packages 12 SPI Security Engines PIC18 PIC24 PIC32 MCU 10 Mbps Ethernet ENC28J60 ■■   Integrated MAC and 10Base-T PHY ■■   8 KB transmit/receive buffer SRAM ■■   MCU Interface Supported: SPI ■■   Available in 28-pin SPDIP, SSOP, SOIC and QFN packages MAC Address Chips ■■   Pre-programmed EUI-48™ and EUI-64™ node address ■■   Up to 1.5 Kb Serial EEPROM functionality SPI: 25AA02E48 I2C: 24AA02E48 UNI/O®: 11AA02E48 www.microchip.com/MAC Ethernet Connectivity Solutions Complete Portfolio of Ethernet Products for Flexibility of Design Ethernet devices have become ubiquitous in communications and networking products servicing a wide variety of applications across multiple market segments. This well-understood technology provides a robust link to ensure reliable communication between devices in a network. Microchip has a broad portfolio of reliable, high-quality, and highperformance Ethernet solutions. From Ethernet switches, controllers, bridges and PHYs to a variety of standard interfaces serving consumer, industrial and automotive applications, Microchip can provide a solution to address your varied application needs and offers you the support needed to reduce your time-to-market. USB 2.0 Processor Magnetics Ethernet Ethernet Ethernet 10/100 PHY 10/100 Ethernet MAC 10/100 PHY JTAG USB 2.0 Device Controller FIFO Controller 10/100/1000 Ethernet MAC 10/100/1000 Ethernet PHY Ethernet TAP Controller SRAM EEPROM Controller EEPROM Ethernet EEPROM (Optional) EEPROM Controller PLL USB 2.0 PHY Processor Ethernet Magnetics MII/Turbo MII Magnetics Ethernet Bridges (USB to Ethernet) External EEPROM Ethernet Switches LAN7500 and LAN95XX/97XX Families 25 MHz Crystal LAN93XX Family ■■   H  igh-performance, full-featured 3-port switches with per-port 802.1Q VLAN support (up to 16 VLAN groups) ■■   Excellent ESD protection (+-8 kV/15 kV) per port ■■   IGMP v1/v2 monitoring for multicast packet filtering ■■   Up to 200 Mbps network speed via Turbo MII interface ■■   Virtual PHY feature simplifies software development by mimicking multiple switch ports as a single port PHY Ethernet PHYs Ethernet Controllers I/F 25 MHz Crystal PLL EEPROM Controller Host Bus Interface (HBI) 10/100 Ethernet MAC 10/100 Ethernet PHY PLL Ethernet Processor Power Management I/F Interface Transmitter HP Auto-MDIX Ethernet Magnetics EEPROM (Optional) Magnetics Processor 25 MHz ■■   USB 2.0 to 10/100 and 10/100/1000 Ethernet products ■■   Flexible interfaces supported (USB 2.0, HSIC) ■■   Integrated USB, Ethernet MAC and PHY for lowest BOM cost and size ■■   Multi-port support for USB port expansion ■■   Supports numerous power management features including Wake-on-LAN, Magic Packet™, and Link Status Change ■■   Software compatibility – transparent to USB software stack and device drivers Ethernet Receiver Ethernet LAN92XX/LAN94XX and ENC Families ■■   Single-chip Ethernet controllers with integrated MAC and PHY ■■   Flexible interfaces supported (16/32-bit local bus, PCI, MII, high speed SPI, parallel) ■■   Efficient architecture to minimize CPU overhead ■■   Integrated checksum offload engine ■■   Conforms with 802.3/802.3u industry standards ■■   HP Auto-MDIX support LAN87XX and LAN88XX Families ■■   10/100 and 10/100/1000 tranceivers with support for all industry-standard interfaces (MII, RMII, GMII, RGMII) ■■   Comprehensive flexPWR® technology to provide flexible options to minimize power consumption ■■   Energy Efficient Ethernet (802.3az) support ■■   Deterministic latency to provide the most reliable and predictable link ■■   Wake-on-LAN support www.microchip.com/ethernet Connectivity Solutions 13 Ethernet Development Tools Supporting Ethernet Development from Concept to Prototype Development Tools Support PICDEM.net 2 Development Board (DM163024) This Ethernet development board supports both the ENC28J60 controller and the PIC18F97J60 MCU. With this board and Microchip’s free TCP/IP stack, a web server can be developed showcasing the capability to remotely monitor and control embedded applications over the Internet. PIC32 Ethernet Starter Kit II (DM320004-2) This board provides the easiest and lowest-cost method to experience 10/100 Ethernet development with PIC32 microcontrollers. Combined with Microchip’s free TCP/IP software, this kit gets your project running quickly. It features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) PHY Daughter Boards for prototyping and development. Fast 100 Mbps Ethernet PICtail Plus Daughter Board (AC164132) Populated with the ENC624J600, this Ethernet board interfaces to the RJ-45 connector. It can be plugged into the Explorer 16 Development Board (DM240001) and the PIC18 Explorer Board (DM183032) allowing connection to any of Microchip’s 8-, 16- and 32-bit products. Ethernet PICtail Plus Daughter Board (AC164123) This board is populated with the 28-pin ENC28J60 Ethernet controller which interfaces to the RJ-45 connector. It can be plugged into the Explorer 16 Development Board (DM240001), allowing connection to any of Microchip’s 16- and 32-bit products when used in conjunction with the free Microchip TCP/IP stack. www.microchip.com/ethernet 14 Connectivity Solutions PIC32MZ Embedded Connectivity Starter Kit (DM320006) This board provides the easiest and lowest-cost method to experience the high performance and advanced peripherals integrated in the PIC32MZ Embedded Connectivity MCUs. This starter kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) PHY Daughter Boards for prototyping and development. PIC32MZ Embedded Connectivity Starter Kit with Crypto Engine (DM320006-C) This board provides the easiest and lowest-cost method to experience the high performance and advanced peripherals integrated in the PIC32MZ Embedded Connectivity MCUs. It features the PIC32MZ2048ECM144 with on-board crypto engine for encryption, decryption, and authentication and has a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) PHY Daughter Boards for prototyping and development. LAN8720A PHY Daughter Board (AC320004-3) The LAN8720A PHY Daughter Board is populated with the high-performance, small-footprint, low-power 10BaseT/100Base-TX Ethernet LAN8720A PHY. It is designed for easy development of RMII Ethernet control applications when plugged into the PIC32-compatible starter kits listed below: ■ PIC32MZ Embedded Connectivity Starter Kit (DM320006) ■ PIC32MZ Embedded Connectivity Starter Kit with Crypto Engine (DM320006-C) ■ PIC32 Ethernet Starter Kit II (DM320004-2) Ethernet Development Tools Supporting Ethernet Development from Concept to Prototype Ethernet Controller Evaluation Boards Ethernet Bridge Evaluation Boards LAN921X High-Performance 10/100 Ethernet Controller (EVB-LAN9218I-MINI) LAN9500A Hi-Speed USB 2.0 to 10/100 Ethernet Bridge Controller (EVB-LAN9500A-MII/EVB-LAN9500A-LC) The EVB-LAN9218I-MINI is used to evaluate our LAN921X family of high performance 10/100 Ethernet Controllers. These devices are designed to provide optimal performance and minimized CPU overhead. This evaluation board comes with our LAN9218 which has a full 32-bit interface. LAN922X High Performance 10/100 Ethernet Controller with Variable Voltage I/O (EVB-LAN9221-MINI) The EVB-LAN9221-MINI is used to evaluate our LAN922X family of high-performance 10/100 Ethernet Controllers. Similar to the LAN921X family, this solution features a high-performance architecture and minimizes CPU overhead, but also provides a variable voltage I/O feature which allows it to interface with processors requiring a lower I/O voltage. Ethernet Switches Evaluation Boards LAN9303/LAN9303M 10/100 Managed 3-Port Ethernet Switch (EVB9303/EVB9303M) The EVB9303/EVB9303M is used to evaluate our LAN9303 or LAN9303M solutions. Both products are 10/100 3-Port Managed Ethernet Switches which support MII/RMII/Turbo MII interfaces. The solutions can be adapted to support different system architectures. LAN931X 10/100 3-Port Ethernet Switch with Flexible interfaces (EVB-LAN9313M) The EVB-LAN9313M is used to evaluate our LAN931X family of 10/100 3-Port Ethernet Switches which support various host interfaces. The solutions can be adapted to support different system architectures. The EVB-LAN9500A-MII is used to evaluate our LAN9500A Hi-Speed USB 2.0 to Fast Ethernet Bridge Controller solution. Using an existing USB port with our LAN9500A allows you to add Ethernet connectivity to your system architecture. LAN7500 Hi-Speed USB 2.0 to Gigabit Ethernet Bridge Controller (EVB-LAN7500) The EVB-LAN7500 is used to evaluate our LAN7500 Hi-Speed USB 2.0 to Gigabit Ethernet Bridge Controller solution. If your system architecture requires Ethernet connectivity, you can use an existing USB port with our LAN7500 to achieve this requirement. A USB dongle version is also available (EVB-LAN7500-LC). LAN9512/LAN9514 Hi-Speed USB 2.0 to 10/100 Ethernet Hub Customer Evaluation Board (EVB9514) The EVB9514 is an evaluation board that utilizes the LAN9514 to provide a 4-port USB 2.0 hub with an integrated 10/100 Ethernet controller. The EVB9514 provides USB connectivity via one type B upstream USB connector and four type A downstream USB connectors. The EVB9512 is also available for evaluation of the LAN9512. LAN9730 Hi-Speed USB 2.0 HSIC to 10/100 Ethernet Bridge Controller (EVB-LAN9730-MII) The EVB-LAN9730-MII is used to evaluate our LAN9730 Hi-Speed USB 2.0 HSIC-interface to Fast Ethernet Bridge Controller solution. Some system architects prefer to use their HSIC ports to reduce power consumption. The LAN9730 adds Ethernet functionality via the HSIC port. www.microchip.com/ethernet Connectivity Solutions 15 Ethernet Development Tools Supporting Ethernet Development from Concept to Prototype Ethernet Transceiver/PHY Evaluation Boards Third Party Development Tools LAN874X 10/100 Ethernet Transceiver with EEE and Wake-On-LAN (EVB8740) WIZnet W5200 Ethernet PICtail Board (TWIZ5200) The EVB8740 is a PHY evaluation board for our LAN874X family which integrates Energy Efficient Ethernet (EEE) and Wake-on-LAN features. It interfaces to a MAC controller via a standard MII or RMII interface. WIZnet's W5200 Ethernet PICtail Plus Board provides 10/100 Mbps, half/ full duplex Ethernet connectivity via the on-board WIZnet W5200 Ethernet controller, which has a hardwired TCP/ IP processing engine. It works with Explorer 16, PIC32 I/O Expansion Board, PICDEM.net 2, PIC18 Explorer and other development boards. It supports both Microchip's software TCP/IP Stack and WIZnet's hardwired TCP/IP Stack on PIC18, PIC24, PIC32 MCU and dsPIC DSC platforms. Serial Gateway to Ethernet P801 (10/100Base-T) (TIPL801) The IPACK P-801 Gateway from IPLogika is a powerful Serial-to-Ethernet gateway that adds quick, effortless and full 10/100Base-T Ethernet connectivity to client applications. It has all the necessary physical and logical levels for Ethernet connections, making integration with the host computer very convenient and easy. www.microchip.com/ethernet 16 Connectivity Solutions LIN Bus Solutions Scalability and Integration for the Low-Cost Communications Network Local Interconnect Network (LIN) LIN/J2602 is a communication standard designed to address low-cost networking within vehicles. LIN enables a cost-effective communication network for lower-speed switch, smart sensor and actuator applications within the vehicle where the bandwidth and versatility of CAN is not required. LIN can be implemented on any PIC microcontroller (MCU) with a UART or USART interface. Microchip also offers a robust physical layer interface, data link layer implementation, LIN-compliant drivers and a variety of development resources. Stand-alone LIN Transceivers The MCP2003/4(A) family offers stand-alone LIN transceiver options. Both parts meet LIN bus specification versions 1.3, 2.0 and 2.1 and SAE J2602. The transceivers' EMC/ESD performance is among the best in the industry and meets all automotive requirements. The MCP2003A is available in an industry-standard 8-pin SOIC package. The MCP2004A offers a TXE/Fault pin which allows you to disable the transmitter and provides data related to a fault condition. LIN Transceivers with Integrated Voltage Regulator The MCP2021A/2A and MCP2025 integrate a LIN transceiver and a 3.3V or 5V internal voltage regulator with a maximum output current of 70 mA. The devices support the LIN bus specification versions 1.3, 2.0 and 2.1 and SAE J2602 and are designed to meet the stringent EMC/ESD requirements of the world’s auto makers. Microchip also offers the MCP2050 LIN Transceiver with Voltage regulator, windowed watchdog timer and ratio metric VBAT pin that allows for monitoring battery levels using a MCU A/D converter. Integrated Microcontroller with LIN Transceiver and Voltage Regulator The PIC16F1829LIN is a small-footprint MCU + VREG + LIN Transceiver in a single package. Combining the flexible PIC16F1829 microcontroller with the powerful MCP2021A LIN transceiver enables a complete solution for LIN nodes and endpoints, compatible with LIN Specification versions 1.3, 2.0, 2.1, and SAEJ2602. LIN Software Library LIN Data Link Layer firmware can be downloaded free-of-charge from Microchip’s web site. Many thirdparty companies also offer LIN Data Link Layer firmware, providing additional design options. LIN Bus LIN Transceiver LIN Transceiver with Integrated VREG Integrated MCU with LIN Transceiver-VREG MCU High Integration MCU Voltage Regulator VREG Medium Integration Low Integration LIN Development Tools LIN Serial Analyzer Development System (APGDT001) The LIN Analyzer Development Tool enables a PC to communicate with the LIN bus. The PC program uses a graphical user interface to enter and display message frames occurring on the target bus, allowing for easy debug. It can also be used as an active node on a bus to send and receive messages, therefore reducing the application development time. CAN/LIN PICtail Plus Daughter Board (AC164130-2) This daughter board can be used with the Explorer 16 Development Board and various PIMs featuring 16- and 32-bit MCUs with CAN peripherals, or the PIC18 Explorer Board with the PIC18F66K80 PIM to facilitate rapid implementation and evaluation of CAN and LIN applications. PICkit 28-pin LIN Demonstration Board (DM164130-3) The PICkit 28-pin LIN Demonstration Board enables a quick start in developing and debugging applications with the LIN drivers. The kit includes a 28-pin socket which supports various PIC16F devices, a LIN transceiver plus a generous prototype area with various indicator LEDs and buttons to support testing and debuging of an application. PICDEM CAN-LIN 3 Demonstration Board (DM163015) The PICDEM CAN-LIN 3 Demonstration Board provides an easy way to discover the power of Microchip’s CAN and LIN products. The board demonstrates the main features of the 64-pin TQFP PIC18F6680 and 80-pin TQFP PIC18F8680 devices, including those features of the integrated CAN module. In addition, the board employs a LIN sub-network using Microchip's 20-pin SSOP PIC18F1320 and MCP201 LIN Bus. www.microchip.com/lin Connectivity Solutions 17 CAN Bus Solutions Taking Communication and Connectivity in Deeply-Embedded Designs to the Next Level Controller Area Network (CAN) CAN is a serial communication protocol used extensively for high-speed embedded applications where noise immunity and robustness is necessary. The CAN protocol supports speeds up to 1 Mbps and is highly fault-tolerant, making it ideal for safety-critical applications. Microchip offers a complete line of products to meet the needs of high-performance embedded applications using the CAN protocol, including 8-, 16- and 32-bit microcontrollers and 16-bit digital signal controllers with integrated CAN, stand-alone CAN controllers, I/O expanders and CAN transceivers. CAN MCUs and DSCs The 8-bit PIC18F66K80 family offers the industry's best Sleep current of less than 20 nA, a wide operating voltage range of 1.8 to 5.5V and an advanced touch sensing interface. The 16-bit PIC24 and dsPIC33 families offer higher-density Flash memories and high-temperature operation of up to 150°C ambient. The 32-bit PIC32 family offers higher performance and better peripheral integration like Ethernet and USB. At the heart of Microchip’s CAN offering is the enhanced CAN module offered on many Microchip microcontrollers. Key features include: ■ CAN 1.2, CAN 2.0A and CAN 2.0B support ■ 32 buffers for TX/RX ■ 32 acceptance filters ■ Four acceptance mask filters ■ Time stamping ■ DMA support in 16-bit PIC24H and PIC32 microcontrollers and dsPIC33F digital signal controllers ■ DeviceNet™ support ■ Legacy mode Stand-alone CAN Controller Microchip Technology’s MCP2515 is a stand-alone Controller Area Network (CAN) controller that implements the CAN specification, version 2.0B. It is capable of transmitting and receiving both standard and extended data and remote frames. The MCP2515 interfaces with MCUs via an industry-standard Serial Peripheral Interface (SPI) and can be used as an easy method to implement CAN in an existing system. CAN Transceivers The MCP2561/2 are high-speed CAN transceivers that serve as an interface between a CAN controller and the physical bus. The MCP2561 is a SPLIT Option for common mode stabilization and the MCP2562 is a VIO Option for digital I/O level shifting from 1.8V to 5.5V. Both parts meet ISO and CAN specifications in addition to global automotive EMC hardware requirements. www.microchip.com/can 18 Connectivity Solutions CAN Bus CAN Transceiver CAN Transceiver CAN Controller MCU with Integrated CAN Controller CAN MCU Integrated CAN Controller Discrete CAN Controller CAN Development Tools CAN Bus Analyzer (APGDT002) The CAN Bus Analyzer development tool enables a PC to communicate with the CAN bus. The PC program uses a graphical user interface to enter and display message frames occurring on the target bus, allowing for easy debuging. It can also be used as an active node on a bus to send and receive messages, reducing the application development time. CAN/LIN PICtail Plus Daughter Board (AC164130-2) This daughter board can be used with the Explorer 16 Development Board and various PIMs featuring 16- and 32-bit MCUs with CAN peripherals, or the PIC18 Explorer Board with the PIC18F66K80 PIM to facilitate rapid implementation and evaluation of CAN and LIN applications. PICDEM CAN-LIN 3 Demonstration Board (DM163015) The PICDEM CAN-LIN 3 Demonstration Board provides an easy way to discover the power of Microchip’s CAN and LIN products. The board demonstrates the main features of the 64-pin TQFP PIC18F6680 and 80-pin TQFP PIC18F8680 devices, including those features of the integrated CAN module. In addition, the board employs a LIN sub-network using Microchip's 20-pin SSOP PIC18F1320 and MCP201 LIN Bus. Additional Connectivity Protocols Providing Comprehensive System Solutions Other Connectivity Options While the most sophisticated protocols and interfaces tend to garner a significant amount of attention, a number of simpler connectivity options are and will remain the embedded interconnects of choice for designer of many deeply-embedded applications. Microchip’s focus on the embedded market ensures an ongoing commitment to support all of the connectivity solutions utilized by leading designers including the microcontroller peripherals, application notes and software necessary to implement robust, highly-reliable embedded networks. RS-485 Protocol The RS-485 protocol is typically used as a more feature-rich alternative to RS-232. The protocol enables longer distance between nodes and higher data rates. Any PIC microcontroller with an on-board UART can support RS-485 communication. Many PIC microcontrollers include enhanced peripherals with an RS-485 mode. IrDA PICtail Plus Daughter Board (AC164124) IrDA® Protocol MCP2140 Wireless Temperature Sensor Demonstration Board (MCP2140DM-TMPSNS) The IrDA protocol provides many portable devices with an affordable, short distance optical data communications link. IrDA can be implemented on many Microchip MCUs using Microchip's free-of-charge IrDA software stack. In addition, Microchip offers UART to IrDA protocol converter products (MCP2140A, MCP2150) to enable any system to easily add IrDA wireless connectivity. Thie daughter board enables IrDA connectivity when used with the Explorer 16 Development Board (DM240001). This board demonstrates the communication of temperature data to a primary device (PDA or PC with IR port) via IrDA. Machine-to-Machine (M2M) PICtail Daughter Board (AC320011) The Machine-to-Machine (M2M) PICtail Daughter Board, which is based upon u-blox GPS and GSM/GPRS modules, makes it easy to create low-cost M2M applications with location awareness capabilities. The daughter board can be interfaced with Microchip's Multimedia Expansion Board and a PIC32 Starter Kit to provide you with a turnkey platform to get started with apps such as texting, email and GPS. www.microchip.com/connectivity Connectivity Solutions 19 Support Training Microchip is committed to supporting its customers in developing products faster and more efficiently. We maintain a worldwide network of field applications engineers and technical support ready to provide product and system assistance. In addition, the following service areas are available at www.microchip.com: ■ Support link provides a way to get questions answered fast: http://support.microchip.com ■ Sample link offers evaluation samples of any Microchip device: http://sample.microchip.com ■ Forum link provides access to knowledge base and peer help: http://forum.microchip.com ■ Buy link provides locations of Microchip Sales Channel Partners: www.microchip.com/sales If additional training interests you, then Microchip can help. We continue to expand our technical training options, offering a growing list of courses and in-depth curriculum locally, as well as significant online resources – whenever you want to use them. ■ Technical Training Centers and Other Resources: www.microchip.com/training ■ MASTERs Conferences: www.microchip.com/masters ■ Worldwide Seminars: www.microchip.com/seminars ■ eLearning: www.microchip.com/webseminars Sales Office Listing AMERICAS Atlanta Tel: 678-957-9614 Austin Tel: 512-257-3370 Boston Tel: 774-760-0087 Chandler Tel: 480-792-7200 Chicago Tel: 630-285-0071 Cleveland Tel: 216-447-0464 Dallas Tel: 972-818-7423 Detroit Tel: 248-538-2250 Houston Tel: 281-894-5983 Indianapolis Tel: 317-773-8323 Los Angeles Tel: 949-462-9523 New York Tel: 631-435-6000 San Jose Tel: 408-735-9110 Toronto Tel: 905-673-0699 EUROPE Austria - Wels Tel: 43-7242-2244-39 Denmark - Copenhagen Tel: 45-4450-2828 France - Paris Tel: 33-1-69-53-63-20 Germany - Dusseldorf Tel: 49-2129-3766400 Germany - Munich Tel: 49-89-627-144-0 Germany - Pforzheim Tel: 49-7231-424750 Italy - Milan Tel: 39-0331-742611 Italy - Venice Tel: 39-049-7625286 Netherlands - Drunen Tel: 31-416-690399 Poland - Warsaw Tel: 48-22-3325737 Spain - Madrid Tel: 34-91-708-08-90 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 ASIA/PACIFIC Australia - Sydney Tel: 61-2-9868-6733 China - Beijing Tel: 86-10-8569-7000 China - Chengdu Tel: 86-28-8665-5511 China - Chongqing Tel: 86-23-8980-9588 China - Hangzhou Tel: 86-571-87928115 China - Hong Kong SAR Tel: 852-2943-5100 China - Nanjing Tel: 86-25-8473-2460 China - Qingdao Tel: 86-532-8502-7355 China - Shanghai Tel: 86-21-5407-5533 China - Shenyang Tel: 86-24-2334-2829 China - Shenzhen Tel: 86-755-8864-2200 China - Wuhan Tel: 86-27-5980-5300 China - Xiamen Tel: 86-592-2388138 China - Xian Tel: 86-29-8833-7252 China - Zhuhai Tel: 86-756-3210040 ASIA/PACIFIC India - Bangalore Tel: 91-80-3090-4444 India - New Delhi Tel: 91-11-4160-8631 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Japan - Tokyo Tel: 81-3-6880-3770 Korea - Daegu Tel: 82-53-744-4301 Korea - Seoul Tel: 82-2-554-7200 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Malaysia - Penang Tel: 60-4-227-8870 Philippines - Manila Tel: 63-2-634-9065 Singapore Tel: 65-6334-8870 Taiwan - Hsin Chu Tel: 886-3-5778-366 Taiwan - Kaohsiung Tel: 886-7-213-7830 Taiwan - Taipei Tel: 886-2-2508-8600 Thailand - Bangkok Tel: 66-2-694-1351 3/12/14 www.microchip.com Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, MPLAB, mTouch, PIC and UNI/O are registered trademarks and MiWi, MultiTRAK, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, VariSense and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2014, Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 6/14 DS00001181L Microchip Technology Inc. 2355 W. Chandler Blvd. Chandler, AZ 85224-6199