2N6298 and 2N6299
PNP Darlington Power Silicon Transistor
Available on
commercial
versions
Qualified per MIL-PRF-19500/540
Qualified Levels:
JAN, JANTX, and
JANTXV
DESCRIPTION
This high speed PNP transistor is rated at 8 amps and is military qualified up to a JANTXV
level. This TO-213AA isolated package features a 180 degree lead orientation.
TO-213AA (TO-66)
Package
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
JEDEC registered 2N6298 and 2N6299
Hermetically sealed
JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/540
RoHS compliant versions available (commercial grade only)
APPLICATIONS / BENEFITS
•
•
•
Convenient package
Mechanically rugged
Military, space and other high reliability applications
MAXIMUM RATINGS @ 25 ºC unless otherwise stated
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance Junction-to-Case
Collector-Base Voltage
Collector-Emitter Voltage
2N6298
2N6299
2N6298
2N6299
Emitter-Base Voltage
Continuous Operating Collector Current
Base Current
(1)
Total Power Dissipation
@ T C = +25 ºC
@ T C = +100 ºC
Symbol
T J and T STG
R ӨJC
V CBO
V CEO
V EBO
IC
IB
PT
Value
-65 to +175
2.33
-60
-80
-60
-80
-5
-8
-120
64
32
NOTES: 1. Derate linearly at 0.428 W/ºC above T C > +25 ºC.
T4-LDS-0310, Rev. 1 (8/9/13)
©2013 Microsemi Corporation
Unit
o
C
o
C
V
V
V
A
mA
W
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Page 1 of 6
2N6298 and 2N6299
MECHANICAL and PACKAGING
•
•
•
•
•
CASE: Hermetic, TO-213AA package. Nickel plate with nickel cap.
TERMINALS: Solder dipped (Sn63/Pb37) over nickel plated alloy 52. RoHS compliant matte-tin plating is also available.
MARKING: MSC, part number, date code, polarity symbol
WEIGHT: Approximately 5.7 grams
See Package Dimensions on last page.
PART NOMENCLATURE
JAN
2N6298
(e3)
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
Blank = Commercial
RoHS Compliance
e3 = RoHS Compliant (available
on commercial grade only)
Blank = non-RoHS Compliant
JEDEC type number
(see Electrical Characteristics
table)
Symbol
IB
IC
IE
TC
V CB
V CBO
V CC
V CEO
V EB
V EBO
SYMBOLS & DEFINITIONS
Definition
Base current: The value of the dc current into the base terminal.
Collector current: The value of the dc current into the collector terminal.
Emitter current: The value of the dc current into the emitter terminal.
Case temperature: The temperature measured at a specified location on the case of a device.
Collector-base voltage: The dc voltage between the collector and the base.
Collector-base voltage, base open: The voltage between the collector and base terminals when the emitter terminal is
open-circuited.
Collector-supply voltage: The supply voltage applied to a circuit connected to the collector.
Collector-emitter voltage, base open: The voltage between the collector and the emitter terminals when the
base terminal is open-circuited.
Emitter-base voltage: The dc voltage between the emitter and the base.
Emitter-base voltage, collector open: The voltage between the emitter and base terminals with the
collector terminal open-circuited.
T4-LDS-0310, Rev. 1 (8/9/13)
©2013 Microsemi Corporation
Page 2 of 6
2N6298 and 2N6299
ELECTRICAL CHARACTERISTICS @ 25 ºC unless otherwise stated
Parameters / Test Conditions
(1)
ON CHARACTERISTICS
Symbol
Min.
2N6298
2N6299
V (BR)CEO
-60
-80
Collector-Emitter Cutoff Current
V CE = -60, V BE = 1.5 V
V CE = -80, V BE = 1.5 V
2N6298
2N6299
I CEX
10
µA
Collector-Emitter Cutoff Current, Base Open
V CE = -30 V
V CE = -40 V
2N6298
2N6299
I CEO
-0.5
mA
I EBO
-2.0
mA
Collector-Emitter Breakdown Voltage
I C = -100 mA
Emitter-Base Cutoff Current
V EB = -5 V
Forward Current Transfer Ratio
I C = -1 A, V CE = -3 V
I C = -4 A, V CE = -3 V
I C = -8 A, V CE = -3 V
Collector-Emitter Saturation Voltage
I C = -4.0 A, I B = -16 mA
I C = -8.0 A, I B = -80 mA
Base-Emitter Saturation Voltage
I C = -8.0 A, I B = -80 mA
h FE
DYNAMIC CHARACTERISTICS
Parameters / Test Conditions
Magnitude of Common Emitter Small-Signal
Short-Circuit Forward Current Transfer Ratio
V CE = -3.0 V, I C = -3.0 A, f = 1 MHz
Common Emitter Small-Signal Short-Circuit
Forward Current Trans-Ratio
V CE = -3 V, I C = -3 A, f = 1 kHz
Output Capacitance
V CB = -10 V, I E = 0 A, 100 kHz ≤ f ≤ 1 MHz
500
750
100
Max.
Unit
V
18000
V CE(sat)
-2.0
V
V BE(sat)
-4.0
V
Unit
Symbol
Min.
Max.
|h fe |
25
350
h fe
300
C obo
200
pF
(1) Pulse Test: pulse width = 300 US, duty cycle ≤ 2.0 %
T4-LDS-0310, Rev. 1 (8/9/13)
©2013 Microsemi Corporation
Page 3 of 6
2N6298 and 2N6299
o
ELECTRICAL CHARACTERISTICS @ T C = 25 C unless otherwise noted. (continued)
SWITCHING CHARACTERISTICS
Parameters / Test Conditions
Turn-On time
V CC = -30 V, I C = -4 A, I B1 = -16 mA
Turn-Off time
V CC = -30 V, I C = -4 A, I B1 = -16 mA
Symbol
Min.
Max.
Unit
t on
2.0
µs
t off
8.0
µs
SAFE OPERATING AREA (See figures 1 and 2 and MIL-STD-750,Test Method 3053)
DC Tests
T C = 25 °C +10 ºC, t = 1 second, 1 Cycle
Test 1
V CE = -8 V, I C = -8 A
Test 2
V CE = -20 V, I C = -2.0 A
Test 3
V CE = -60 V, I C = -100 mA (2N6298)
V CE = -80 V, I C = -100 mA (2N6299)
T4-LDS-0310, Rev. 1 (8/9/13)
©2013 Microsemi Corporation
Page 4 of 6
2N6298 and 2N6299
IC = Collector Current (Amperes)
SAFE OPERATING AREA
V CE – Collector to Emitter Voltage (Volts)
IC = Collector Current (Amperes)
FIGURE 1
Maximum Safe Operating Area (dc)
L – Inductance (millihenries)
FIGURE 2
Safe Operating Area for switching between saturation and cutoff (unclamped inductive load)
T4-LDS-0310, Rev. 1 (8/9/13)
©2013 Microsemi Corporation
Page 5 of 6
2N6298 and 2N6299
PACKAGE DIMENSIONS
DIM
CB
CD
CH
HR
HT
HR1
LD
LL
L1
MHD
MHS
PS
PS1
S
T1
T2
Case
INCH
MILLIMETERS
MIN
MAX
MIN
MAX
0.470
0.500 11.94
12.70
0.620
15.76
0.250
0.340
6.35
8.64
0.350
8.89
0.050
0.075
1.27
1.91
0.115
0.145
2.92
3.68
0.028
0.034
0.71
0.86
0.360
0.500
9.14
12.70
0.050
1.27
0.142
0.152
3.61
3.86
0.958
0.962 24.33
24.43
0.190
0.210
4.83
5.33
0.093
0.107
2.36
2.73
0.570
0.590 14.48
14.99
Base
Emitter
Collector
Notes
4
4, 6
6
4
3
3
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for information only.
3. These dimensions should be measured at points 0.050 inch (1.27 mm)
+0.005 inch (0.13 mm) -0.000 inch (0.00 mm) below seating plane.
When gauge is not used, measurement will be made at the seating
plane.
4. Two places.
5. The seating plane of the header shall be flat within 0.001 inch (0.03
mm) concave to .004 inch (0.10 mm) convex inside a .930 inch (23.62
mm) diameter circle on the center of the header and flat within .001
inch (0.03 mm) concave to .006 inch (0.15 mm) convex overall.
6. Lead diameter shall not exceed twice LD within L1.
7. Lead number 1 is the emitter, lead 2 is the base, case is the collector.
8. In accordance with ASME Y14.5M, diameters are equivalent to Φx
symbology.
SCHEMATIC
T4-LDS-0310, Rev. 1 (8/9/13)
©2013 Microsemi Corporation
Page 6 of 6