MEC1310-NU

MEC1310 Keyboard and Embedded Controller for Notebook PC Product Features • 3.3V Operation with 5V Tolerant Buffers on PS/2 pins • ACPI 1.0/2.0 PC99/PC2001 Compliant • LPC Interface with Clock Run Support - Supports LPC Bus frequencies of 19.2MHz to 33MHz - Serial IRQ Interface Compatible with Serialized IRQ Support for PCI Systems - 15 Direct IRQs - ACPI SCI Interface - nSMI output and supporting PM registers - Shadowed write only registers • Internal 64K SRAM in MEC1310 - Loaded at VCC1 power from the HOST/8051 SPI Memory Interface - Provides 64KB of 8051 program space - 32k-Byte region shared with 8051data space • HOST/8051 SPI Memory Interface - 3-pin Full Duplex serial communication interface. - One Chip Select Pins - Fully 8051 Controlled - Hardware Support for two SPI Flash Configurations: – Switched SPI Flash Configuration – Parallel Shared SPI Flash Configuration – Debug Programming Interface • Two Power Planes - Low Standby Current in Sleep Mode • Three ACPI Embedded Controller Interface • Configuration Register Set Compatible with ISA Plug-and-Play Standard (Version 1.0a) • High-Performance Embedded 8051 Keyboard and System Controller - Provides System Power Management - System Watch Dog Timer (WDT) - 8042 Style Host Interface - Supports Interrupt and Polling Access - 1024 Boot /ROM - 256 Bytes Data RAM - On-Chip Memory-Mapped Control Registers - Access to VCC0 Backed Registers - Up to 18x8 Keyboard Scan Matrix  2014 Microchip Technology Inc. - Two 16-Bit Timer/Counters Integrated Full-Duplex Serial Port Interface Seventy-Three 8051 Interrupt Sources Thirty-Two 8-Bit, Host/8051 Mailbox Registers - Sixty-Four Maskable Hardware Wake-Up Events - Fast GATEA20 - Fast CPU_RESET - Multiple Clock Sources and Operating Frequencies - IDLE and SLEEP Modes - Trace FIFO Debug Port • Accurate Fail-Safe Ring Oscillator - Single Clock source for most 8051 and SIO functions - Provides 2% frequency accuracy - Lock Bit provides status - 32.768KHz-input clock – Single ended input – Compatible with south bridge SUSCLK/ RSMRST# gating rules – replacement 32K distribution available when RSMRST# is asserted – Very low power state with only external 32K clock distributed • Integrated Standby Power Reset Generator - VCC1_RST# open drain output - Accepts External driven Reset • VCC0 Backed Resources - 64 Byte VCC0 Backed Registers - VCC0 Backed Status Register • Three 8584-Style I2C/SMBus Controllers - 8051 Controlled Logic Allows I2C/SMBus Master or Slave Operation - I2C/SMBus Controllers are Fully Operational on Standby Power - Two Controllers with 2 Sets of Dedicated Pins per I2C/SMBus Controller - One Controller with one Set of Dedicated Pins per I2C/SMBus Controller • Four independent Hardware Driven PS/2 Ports - GPIO signal function associated with each pin • PECI Interface 2.0 DS00001768A-page 1 MEC1310 • 56 General Purpose I/O Pins - Maskable Hardware Wake-Event Capable - Programmable Open-Drain/Push-Pull Outputs • 7 General-Purpose Outputs • Four Programmable Pulse-Width Modulator Outputs - Independent Clock Rates - 6-Bit Duty Cycle Granularity - Operational in both Full on and Standby modes • Dual Fan Tachometer Inputs • RPM-Based Fan Speed Control Algorithm - Utilizes one TACH input and one PWM output - 3% accurate from 500 RPM to 16k RPM - Automatic Tachometer feedback - Aging Fan or Invalid Drive Detection - Spin Up Routine - Ramp Rate Control – RPM-based Fan Speed Control Algorithm • Debug Port (UART) - High-Speed 16550A-Compatible UART with 16-Byte Send/Receive FIFOs - Programmable Baud Rate Generator - Relocatable to 480 Different Base I/O Addresses - 15 IRQ Options • BC-Link Interconnection Bus - Combined High Speed/Low Speed Bus Master Controller • General Purpose Analog to Digital Converter (GPADC) - 10-bit conversion precision - 10-bit conversion per channel is completed in 10.91us - 5 ADC channels – 10-bit Conversion with 25.78 mV resolution – 0 to 3.3 VDC Conversion Range Description The MEC1310 is a 128-pin 3.3V LPC-based ACPI 2.0 and PC99/PC2001 compliant Notebook I/O Controller. See FIGURE 1: MEC1310 Block Diagram on page 4. The MEC1310 incorporates a high-performance 8051based keyboard and system controller with internal embedded 64K SRAM; a 1K byte Boot ROM, and 64bytes battery backed registers. The embedded 64K SRAM is loaded via HOST/8051 SPI Memory Interface. The HOST/8051 SPI Memory Interface can be configured in Switched SPI Flash Configuration or Parallel Shared SPI Flash Configuration. The MEC1310 has four PS/2 ports; an 16C550A-compatible 2 pin UART for Debug Port; three 8584-style I2C/SMBus controllers with two selectable ports per controller; a Serial IRQ peripheral agent interface; three ACPI Embedded Controller Interface; General Purpose I/O pins and seven General Purpose Outputs; four independently programmable pulse width modulators; dual fan control through the implementation of two fan tachometer input pins, RPM-PWM block with one tachometer input and one PWM output; hardware monitoring of a PWM input and maskable hardware wakeup events; one BC-Link Combined High Speed/Low Speed Bus Master Controller; 5 channel Analog to Digital Converter. The MEC1310 has two separate power planes to provide “instant on” and system power management functions. Additionally, the MEC1310 incorporates sophisticated power control circuitry (PCC). The PCC supports multiple low power down modes. Wake-up events and ACPI-related functions are supported through the SCI Interface. The MEC1310 supports the ISA Plug-and-Play Standard (Version 1.0a) and provides all the functionality for current Windows O/S’s. The I/O Address and Hardware IRQ of each logical device in the MEC1310 may be reprogrammed through the internal configuration registers. There are 480 I/O address location options and 15 IRQs for each logical device. - Channel 0 has a 5 volt tolerant input - Optional continuous sampling at a programmable rate - Selectable VREF source on a per Channel Basis – VREF pin or AVCC • 128-Pin VTQFP RoHS Compliant Package DS00001768A-page 2  2014 Microchip Technology Inc. MEC1310 TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@microchip.com. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000000A is version A of document DS30000000). Errata An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: • Microchip’s Worldwide Web site; http://www.microchip.com • Your local Microchip sales office (see last page) When contacting a sales office, please specify which device, revision of silicon and data sheet (include -literature number) you are using. Customer Notification System Register on our web site at www.microchip.com to receive the most current information on all of our products.  2014 Microchip Technology Inc. DS00001768A-page 3 MEC1310 BLOCK DIAGRAM FIGURE 1: MEC1310 BLOCK DIAGRAM VCC1(5) VCC2(2) VSS(7) PECI_DAT PECI_VREF PECI nRESET_OUT LAD [3:0] LFRAME# LRESET# MEC1310 - 128 Pin, 64KB Executable SRAM SYSTEM RESET LPC BUS HOST CPU INTERFACE Analog to Digital Converter. CONFIGURATION REGISTERS nEC_SCI nSMI SER_IRQ CLKRUN# PCI_CLK TXD RXD VCC1_RST# PWRGD RSMRST# 32KHZ_INPUT BC_CLK BC_DAT BC_INT# BC-Link Bus Master Controller POWER MANAGEMENT INTERRUPTS ADC[0:4] RPM-PWM TACH2PWM_IN TACH2PWM_OUT Pulse Width Modulator Output PWM[0:4] Fan Tachometer FAN_TACH[1:2] CONTROL, ADDRESS, DATA 16C550A COMPATIBLE SERIAL PORT OUT GENERAL PURPOSE I/O INTERFACE I/O nEC_SCI OUT0, OUT1, OUT7 - OUT11 GPIO00 – GPIO47 GPIO[50:57] MAILBOX REGISTERS POWER Reset & Control 3x ACPI EMBEDDED CONTROLLER 32K Distrabu-tion PM1 BLOCK 8051 8051TX 8051 SUB-BLOCK EXTERNAL CONTROL REGISTERS 256B Direct RAM nBAT_LED, nPWR_LED, nFDD_LED, nDMS_LED LED DRIVER 8051RX 18 x 8 KEYBOARD INTERFACE KSI[0:7] KSO[0:17] KBRST, A20M 1024B Boot ROM PS/2 PORTS Executable SRAM ACCESS BUS 1 AB1A_DATA, AB1A_CLK AB1B_DATA, AB1B_CLK ACCESS BUS 2 AB2A_DATA , AB2A_CLK AB2B_DATA , AB2B_CLK KCLK, EMCLK, IMCLK, PS2CLK KDAT, EMDAT, IMDAT, PS2DAT VCC0 Resources WDT D 64 Bytes Reg VCC0 AGND Accurate Ring Oscillator ACCESS BUS 3 PWR_FAIL Reg VCC2 Controlled Note: This block diagram shows internal block interfaces before pin multiplexing, and should not used for pin count. VCC1 Controlled SPI Interface AB3_DATA , AB3_CLK SPI Switch HSTCLK, HSTCS0# HSTDATAIN, HSTDATAOUT FLCLK, FLCS0# FLDATAIN, FLDATAOUT DS00001768A-page 4  2014 Microchip Technology Inc. MEC1310 PACKAGE OUTLINE  2014 Microchip Technology Inc. http://www.microchip.com/packaging MEC1310 128-PIN VTQFP PACKAGE OUTLINE 14X14X1.0 Note: For the most current package drawings, see the Microchip Packaging Specification at FIGURE 2: DS00001768A-page 5 MEC1310 APPENDIX A: TABLE A-1: PRODUCT BRIEF REVISION HISTORY REVISION HISTORY Revision DS00001768A (06-02-14) DS00001768A-page 6 Section/Figure/Entry Correction Document Release  2014 Microchip Technology Inc. MEC1310 THE MICROCHIP WEB SITE Microchip provides online support via our WWW site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information: • Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software • General Technical Support – Frequently Asked Questions (FAQ), technical support requests, online discussion groups, Microchip consultant program member listing • Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives CUSTOMER CHANGE NOTIFICATION SERVICE Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com. Under “Support”, click on “Customer Change Notification” and follow the registration instructions. CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • • • • Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://www.microchip.com/support  2014 Microchip Technology Inc. DS00001768A-page 7 MEC1310 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. Device [X] - Temperature Range XXX - Package [X](1) Tape and Reel Option Example: MEC1310-NU for 128-pin VTQFP RoHS Compliant packaage Device: MEC1310 Temperature Range: Blank i Package: NU Tape and Reel Option: Blank TR = 0°C to = -40°C to = +85°C +85°C (Extended Commercial) (Industrial) 128-pin VTQFP = Standard packaging (tray) = Tape and Reel(1) Note 1: DS00001768A-page 8 Tape and Reel identifier only appears in the catalog part number description. This identifier is used for ordering purposes and is not printed on the device package. Check with your Microchip Sales Office for package availability with the Tape and Reel option. Reel size is 4,000.  2014 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and ZScale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. flexPWR, JukeBlox, Kleer, KleerNet, MediaLB, and MOST The preceding is a non-exhaustive list of trademarks in use in the US and other countries. For a complete list of trademarks, email a request to legal.department@microchip.com. The absence of a trademark (name, logo, etc.) from the list does not constitute a waiver of any intellectual property rights that SMSC has established in any of its trademarks. All other trademarks mentioned herein are property of their respective companies. © 2014, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. ISBN: 9781632762511 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 ==  2014 Microchip Technology Inc. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS00001768A-page 9 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2943-5100 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 Austin, TX Tel: 512-257-3370 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Canada - Toronto Tel: 905-673-0699 Fax: 905-673-6509 DS00001768A-page 10 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 China - Hangzhou Tel: 86-571-8792-8115 Fax: 86-571-8792-8116 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Dusseldorf Tel: 49-2129-3766400 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Pforzheim Tel: 49-7231-424750 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy - Venice Tel: 39-049-7625286 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Poland - Warsaw Tel: 48-22-3325737 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 Taiwan - Kaohsiung Tel: 886-7-213-7830 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 03/25/14  2014 Microchip Technology Inc.