MIC861
Ultra-Low Power Operational Amplifier
Features
General Description
•
•
•
•
•
•
The MIC861 is a rail-to-rail output, input common-mode
to ground, operational amplifier in SC70 packaging.
The MIC861 provides a 400 kHz gain-bandwidth
product while consuming an incredibly low 4.6 μA
supply current.
SC70 Packaging
400 kHz Gain-Bandwidth Product
650 kHz, –3dB Bandwidth
4.6 μA Supply Current
Rail-to-Rail Output
Ground Sensing at Input (Common Mode to
GND)
• Drives Large Capacitive Loads (1000 pF)
• Unity Gain Stable
The SC70 packaging achieves significant board space
savings over devices packaged in SOT-23 or MSOP-8
packaging. The SC70 occupies approximately half the
board area of a SOT-23 package.
Applications
•
•
•
•
•
Handheld Electronics
Laptop Computers
Tablets
Mobile Phones
Consumer Electronics
Package Type
Pin Configuration
Functional Configuration
SC70–5 (C5)
SC70–5 (C5)
,1í
9í
IN+
3
2
1
Part
Identification
,1í 9í
3
2
IN+
1
A33
4
5
OUT
V+
2020 Microchip Technology Inc.
4
5
OUT
V+
DS20006347A-page 1
MIC861
1.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Supply Voltage (VV+ to VV–) .................................................................................................................................... +6.0V
Differential Input Voltage (VIN+ to VIN–) ................................................................................................................... +6.0V
Input Voltage (VIN+, VIN–) ................................................................................................................V+ +0.3V to V– –0.3V
Output Short-Circuit Current Duration ................................................................................................................ Indefinite
ESD Rating...........................................................................................................................................................(Note 1)
Operating Ratings ‡
Supply Voltage (V+ to V-) ......................................................................................................................+2.43V to +5.25V
† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at those or any other conditions above those indicated
in the operational sections of this specification is not intended. Exposure to maximum rating conditions for extended
periods may affect device reliability.
‡ Notice: The device is not guaranteed to function outside the operating ratings.
Note 1: Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5 kΩ in series
with 100 pF. Pin 4 is ESD sensitive.
DS20006347A-page 2
2020 Microchip Technology Inc.
MIC861
ELECTRICAL CHARACTERISTICS
Electrical Characteristics: V+ = +2.7V, V– = 0V VCM = V+/2; RL = 500 kΩ to V+/2; TA = 25°C, unless otherwise
noted. (Note 2).
Parameters
Symbol
Input Offset Voltage
Min.
Typ.
Max.
Units
Conditions
–10
2
10
mV
—
15
—
μV/°C
—
–40°C ≤ TA ≤ +85°C (Note 1)
Input Offset Voltage
Temperature
Coefficient
VOS
Input Bias Current
IB
—
20
—
pA
—
Input Offset Current
IOS
—
10
—
pA
—
Input Voltage
Range
VCM
—
1.8
—
V
CMRR >60 dB
Common-Mode
Rejection Ratio
CMRR
45
77
—
dB
0 < VCM < 1.35V, –40°C ≤ TA ≤ +85°C
Power Supply
Rejection Ratio
PSRR
50
83
—
dB
Supply voltage change of 3V, –40°C
≤ TA ≤ +85°C
60
74
—
dB
RL = 100 kΩ, VOUT = 2VPP,
–40°C ≤ TA ≤ +85°C
73
83
—
dB
RL = 500 kΩ, VOUT = 2VPP,
–40°C ≤ TA ≤ +85°C
V
±2 mV
V
±0.7 mV
—
V
—
V
±0.2 mV
V
±2 mV
Large-Signal
Voltage Gain
AVOL
Maximum Output
Voltage Swing
VOUT
Gain-Bandwidth
Product
GBWP
—
350
—
kHz
RL = 200 kΩ, CL = 2 pF, VOUT = 0
–3 dB Bandwidth
BW
—
500
—
kHz
AV = 1, CL = 2 pF, RL = 1 MΩ
Slew Rate
SR
—
0.12
—
V/μs
AV = 1, CL = 2 pF, RL = 1 MΩ
Short-Circuit Output
Current
ISC
—
6
—
mA
Source
—
—
5
—
mA
Sink
Supply Current
IS
—
4.2
9
μA
No load, –40°C ≤ TA ≤ +85°
2020 Microchip Technology Inc.
RL = 500 kΩ, –40°C ≤ TA ≤ +85°
DS20006347A-page 3
MIC861
ELECTRICAL CHARACTERISTICS (SINGLE SUPPLY)
Electrical Characteristics: V+ = +5V, V- = 0V, VCM = V+/2; RL = 500 kΩ to V+/2; TA = 25°C, TA= TJ; unless
otherwise noted (Note 2).
Parameters
Symbol
Input Offset Voltage
Input Offset Voltage
Temperature
Coefficient
Input Bias Current
VOS
Min.
Typ.
Max.
Units
Conditions
–10
2
10
mV
—
15
—
μV/°C
—
–40°C ≤ TA ≤ +85°C (Note 1)
IB
—
20
—
pA
—
Input Offset Current
IOS
—
10
—
pA
—
Input Voltage
Range
VCM
—
4.2
—
V
CMRR >60 dB
Common-Mode
Rejection Ratio
CMRR
60
80
—
dB
0 < VCM < 3.5V, –40°C ≤ TA ≤ +85°C
Power Supply
Rejection Ratio
PSRR
45
85
—
dB
Supply voltage change of 1V,
–40°C ≤ TA ≤ +85°C
60
76
—
dB
RL = 100 kΩ, VOUT = 4VPP,
–40°C ≤ TA ≤ +85°C
68
83
—
dB
RL = 500 kΩ, VOUT = 4VPP,
–40°C ≤ TA ≤ +85°C
V
±2 mV
V
±0.7 mV
—
V
—
V
±0.7 mV
V
±2 mV
V
400
—
kHz
RL = 200 kΩ, CL = 2 pF, VOUT = 0
Large-Signal
Voltage Gain
AVOL
Maximum Output
Voltage Swing
VOUT
Gain-Bandwidth
Product
GBWP
—
RL = 500 kΩ, –40°C ≤ TA ≤ +85°C
–3 dB Bandwidth
BW
—
650
—
kHz
AV = 1, CL = 2 pF, RL = 1 MΩ
Slew Rate
SR
—
0.12
—
V/μs
AV = 1, CL = 2 pF, RL = 1 MΩ
Short-Circuit Output
Current
ISC
10
24
—
mA
Source, –40°C ≤ TA ≤ +85°C
—
mA
Sink, –40°C ≤ TA ≤ +85°C
Supply Current
IS
—
4.6
9
μA
No load, –40°C ≤ TA ≤ +85°
Note 1:
2:
The offset voltage distribution is centered around 0V. The typical offset number shown is equal to the standard deviation of the voltage offset distribution.
Specification for packaged product only. Exceeding the maximum differential input voltage will damage the
input stage and degrade performance (in particular, input bias will likely increase).
DS20006347A-page 4
2020 Microchip Technology Inc.
MIC861
TEMPERATURE SPECIFICATIONS (Note 1)
Parameters
Sym.
Min.
Typ.
Max.
Units
Conditions
Storage Temperature
TS
—
—
150
°C
Ambient Temperature Range
TA
–40
—
+85
°C
—
Lead Temperature
—
—
—
260
°C
Soldering, 5s
JA
—
450
—
°C/W
Temperature Ranges
—
Package Thermal Resistance
Thermal Resistance SC70
Note 1:
—
The maximum allowable power dissipation is a function of ambient temperature, the maximum allowable
junction temperature and the thermal resistance from junction to air (i.e., TA, TJ, JA). Exceeding the
maximum allowable power dissipation will cause the device operating junction temperature to exceed the
maximum +85°C rating. Sustained junction temperatures above +85°C can impact the device reliability.
2020 Microchip Technology Inc.
DS20006347A-page 5
MIC861
2.0
Note:
TYPICAL PERFORMANCE CURVES
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range.
DC Typical Characteristics:
5
Sourcing
4
3
2
-40°C
1
25°C
85°C
0
0 -5 -10 -15 -20 -25 -30 -35 -40
OUTPUT CURRENT (mA)
FIGURE 2-1:
Current.
Output Voltage vs. Output
FIGURE 2-4:
Supply Voltage.
FIGURE 2-2:
Current.
Output Voltage vs. Output
FIGURE 2-5:
Offset Voltage vs.
Common-Mode Voltage.
FIGURE 2-3:
Supply Voltage.
Short Circuit Current vs.
FIGURE 2-6:
Offset Voltage vs.
Common-Mode Voltage.
DS20006347A-page 6
Short Circuit Current vs.
2020 Microchip Technology Inc.
MIC861
FIGURE 2-7:
Voltage.
Offset Voltage vs. Supply
FIGURE 2-10:
Temperature.
Offset Voltage vs.
FIGURE 2-8:
Resistive Load.
Open Loop Gain vs.
FIGURE 2-11:
Temperature.
Short Circuit Current vs.
FIGURE 2-9:
Temperature.
Supply Current vs.
FIGURE 2-12:
Temperature.
Short Circuit Current vs.
2020 Microchip Technology Inc.
DS20006347A-page 7
MIC861
AC Typical Characteristics:
FIGURE 2-13:
Capacitive Load.
Gain Bandwidth vs.
FIGURE 2-14:
CMRR vs. Frequency.
FIGURE 2-15:
PSRR vs. Frequency.
DS20006347A-page 8
FIGURE 2-16:
CMRR vs. Frequency.
FIGURE 2-17:
PSRR vs. Frequency.
FIGURE 2-18:
Margin.
Gain Bandwidth and Phase
2020 Microchip Technology Inc.
MIC861
FIGURE 2-19:
Margin.
Gain Bandwidth and Phase
FIGURE 2-22:
Gain Frequency Response.
FIGURE 2-20:
Response.
Unity Gain Frequency
FIGURE 2-23:
Margin.
Gain Bandwidth and Phase
50
225
40
30
180
135
20
10
90
45
0
-10
0
-45
-20 Av = 1
V+ = 1.35V
-30
V– = –1.35V
-40 RL = 1M
-50
10k
1k
100k
FREQUENCY (Hz)
-90
-135
FIGURE 2-21:
Response.
1M
-180
-225
Unity Gain Frequency
2020 Microchip Technology Inc.
FIGURE 2-24:
Closed-Loop Unity Gain
Frequency Response.
DS20006347A-page 9
MIC861
FIGURE 2-25:
Small Signal Pulse
Response (See Figure 3-3).
FIGURE 2-28:
Small Signal Pulse
Response (See Figure 3-3).
FIGURE 2-26:
Small Signal Pulse
Response (See Figure 3-3).
FIGURE 2-29:
Small Signal Pulse
Response (See Figure 3-4).
FIGURE 2-27:
Small Signal Pulse
Response (See Figure 3-3).
FIGURE 2-30:
Small Signal Pulse
Response (See Figure 3-4).
DS20006347A-page 10
2020 Microchip Technology Inc.
MIC861
FIGURE 2-31:
Small Signal Pulse
Response (See Figure 3-4).
FIGURE 2-34:
Operation.
Rail to Rail Output
FIGURE 2-32:
Small Signal Pulse
Response (See Figure 3-4).
FIGURE 2-35:
Operation.
Rail to Rail Output
FIGURE 2-36:
Operation.
Rail to Rail Output
1
FIGURE 2-33:
Operation.
Rail to Rail Output
2020 Microchip Technology Inc.
DS20006347A-page 11
MIC861
FIGURE 2-37:
Large Signal Pulse
Response (See Figure 3-3).
FIGURE 2-38:
Large Signal Pulse
Response (See Figure 3-3).
DS20006347A-page 12
2020 Microchip Technology Inc.
MIC861
3.0
TEST CIRCUITS
FIGURE 3-1:
Test Circuit: 1 AV = 11.
FIGURE 3-4:
Test Circuit: 4 AV = –1.
50
0.1μF
BNC
Input
10μF
170k
48k
BNC
10k
10k
Output
MIC861
50
ȍ
All resistors:
1% metal film
0.1μF
100μF
10μF
V—
FIGURE 3-2:
Test Circuit: 2 AV = 2.
FIGURE 3-5:
Test Circuit: 5 Positive
Power Supply Rejection Ratio Measurement.
V+
FET Probe
RF
CL
9í
FIGURE 3-3:
Test Circuit: 3 AV = 1.
2020 Microchip Technology Inc.
FIGURE 3-6:
Test Circuit: 6 Closed-Loop
Unity Gain Frequency Response Measurement.
DS20006347A-page 13
MIC861
4.0
PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 4-1.
TABLE 4-1:
PIN FUNCTION TABLE
Pin Number
Symbol
1
IN+
Non-inverting input.
2
V–
Negative power supply connection. Connect a 10 μF and 0.1 μF capacitor in parallel to
this pin for power supply bypassing.
3
IN–
Inverting Input.
4
OUT
Output of operational amplifier.
5
V+
DS20006347A-page 14
Description
Positive power supply input. Connect a 10 μF and 0.1 μF capacitor in parallel to this pin
for power supply bypassing.
2020 Microchip Technology Inc.
MIC861
5.0
APPLICATION INFORMATION
Regular
supply
bypassing
techniques
are
recommended. A 10 μF capacitor in parallel with a
0.1 μF capacitor on both the positive and negative
supplies is ideal. For best performance, all bypassing
capacitors should be located as close to the op amp as
possible and all capacitors should be low equivalent
series inductance (ESL) and equivalent series
resistance (ESR). Surface-mount ceramic capacitors
are ideal.
2020 Microchip Technology Inc.
DS20006347A-page 15
MIC861
6.0
PACKAGING INFORMATION
6.1
Package Marking Information
Legend: XX...X
Y
YY
WW
NNN
e3
*
5-Lead SC70*
(Front)
Example
XXX
A33
5-Lead SC70*
(Back)
Example
NNN
415
Product code or customer-specific information
Year code (last digit of calendar year)
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code
Pb-free JEDEC® designator for Matte Tin (Sn)
This package is Pb-free. The Pb-free JEDEC designator ( e3 )
can be found on the outer packaging for this package.
●, ▲, ▼ Pin one index is identified by a dot, delta up, or delta down (triangle
mark).
Note:
In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information. Package may or may not include
the corporate logo.
Underbar (_) and/or Overbar (‾) symbol may not be to scale.
DS20006347A-page 16
2020 Microchip Technology Inc.
MIC861
5-Lead SC70 Package Outline and Recommended Land Pattern
Note:
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging.
2020 Microchip Technology Inc.
DS20006347A-page 17
MIC861
NOTES:
DS20006347A-page 18
2020 Microchip Technology Inc.
MIC861
APPENDIX A:
REVISION HISTORY
Revision A (July 2020)
• Converted Micrel document MIC861 to Microchip
data sheet template DS20006347A.
• Minor text changes throughout.
2020 Microchip Technology Inc.
DS20006347A-page 19
MIC861
NOTES:
DS20006347A-page 20
2020 Microchip Technology Inc.
MIC861
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, contact your local Microchip representative or sales office.
PART NO.
Device
XX
X
Temperature
-XX
Examples:
a)
MIC861YC5-TR:
Package Media Type
Device:
MIC861:
Temperature:
Y
=
–40°C to +85°C
Package:
C5
=
5-Lead SC70
Media Type:
TR
=
3,000/Reel
Op Amp, –40°C to +85°C
Junction Temperature
Range, 5-Lead SC70
Package, 3,000/Reel
Ultra-Low Power Operational
Amplifier
Note 1:
2020 Microchip Technology Inc.
Tape and Reel identifier only appears in the
catalog part number description. This identifier is
used for ordering purposes and is not printed on
the device package. Check with your Microchip
Sales Office for package availability with the
Tape and Reel option.
DS20006347A-page 21
MIC861
NOTES:
DS20006347A-page 22
2020 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, Adaptec,
AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, chipKIT,
chipKIT logo, CryptoMemory, CryptoRF, dsPIC, FlashFlex,
flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck,
LinkMD, maXStylus, maXTouch, MediaLB, megaAVR, Microsemi,
Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer,
PackeTime, PIC, picoPower, PICSTART, PIC32 logo, PolarFire,
Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST,
SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon,
TempTrackr, TimeSource, tinyAVR, UNI/O, Vectron, and XMEGA
are registered trademarks of Microchip Technology Incorporated in
the U.S.A. and other countries.
APT, ClockWorks, The Embedded Control Solutions Company,
EtherSynch, FlashTec, Hyper Speed Control, HyperLight Load,
IntelliMOS, Libero, motorBench, mTouch, Powermite 3, Precision
Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet-Wire,
SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub,
TimePictra, TimeProvider, Vite, WinPath, and ZL are registered
trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any
Capacitor, AnyIn, AnyOut, BlueSky, BodyCom, CodeGuard,
CryptoAuthentication, CryptoAutomotive, CryptoCompanion,
CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average
Matching, DAM, ECAN, EtherGREEN, In-Circuit Serial
Programming, ICSP, INICnet, Inter-Chip Connectivity, JitterBlocker,
KleerNet, KleerNet logo, memBrain, Mindi, MiWi, MPASM, MPF,
MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach,
Omniscient Code Generation, PICDEM, PICDEM.net, PICkit,
PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple
Blocker, SAM-ICE, Serial Quad I/O, SMART-I.S., SQI,
SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC,
USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and
ZENA are trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in
the U.S.A.
The Adaptec logo, Frequency on Demand, Silicon Storage
Technology, and Symmcom are registered trademarks of Microchip
Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology Germany
II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in
other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2020, Microchip Technology Incorporated, All Rights Reserved.
For information regarding Microchip’s Quality Management Systems,
please visit www.microchip.com/quality.
2020 Microchip Technology Inc.
ISBN: 978-1-5224-6418-1
DS20006347A-page 23
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Australia - Sydney
Tel: 61-2-9868-6733
India - Bangalore
Tel: 91-80-3090-4444
China - Beijing
Tel: 86-10-8569-7000
India - New Delhi
Tel: 91-11-4160-8631
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
China - Chengdu
Tel: 86-28-8665-5511
India - Pune
Tel: 91-20-4121-0141
Denmark - Copenhagen
Tel: 45-4485-5910
Fax: 45-4485-2829
China - Chongqing
Tel: 86-23-8980-9588
Japan - Osaka
Tel: 81-6-6152-7160
Finland - Espoo
Tel: 358-9-4520-820
China - Dongguan
Tel: 86-769-8702-9880
Japan - Tokyo
Tel: 81-3-6880- 3770
China - Guangzhou
Tel: 86-20-8755-8029
Korea - Daegu
Tel: 82-53-744-4301
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
China - Hangzhou
Tel: 86-571-8792-8115
Korea - Seoul
Tel: 82-2-554-7200
China - Hong Kong SAR
Tel: 852-2943-5100
Malaysia - Kuala Lumpur
Tel: 60-3-7651-7906
China - Nanjing
Tel: 86-25-8473-2460
Malaysia - Penang
Tel: 60-4-227-8870
China - Qingdao
Tel: 86-532-8502-7355
Philippines - Manila
Tel: 63-2-634-9065
China - Shanghai
Tel: 86-21-3326-8000
Singapore
Tel: 65-6334-8870
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
China - Shenyang
Tel: 86-24-2334-2829
Taiwan - Hsin Chu
Tel: 886-3-577-8366
Germany - Rosenheim
Tel: 49-8031-354-560
China - Shenzhen
Tel: 86-755-8864-2200
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Israel - Ra’anana
Tel: 972-9-744-7705
China - Suzhou
Tel: 86-186-6233-1526
Taiwan - Taipei
Tel: 886-2-2508-8600
China - Wuhan
Tel: 86-27-5980-5300
Thailand - Bangkok
Tel: 66-2-694-1351
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
China - Xian
Tel: 86-29-8833-7252
Vietnam - Ho Chi Minh
Tel: 84-28-5448-2100
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Tel: 317-536-2380
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Tel: 951-273-7800
Raleigh, NC
Tel: 919-844-7510
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Tel: 408-436-4270
Canada - Toronto
Tel: 905-695-1980
Fax: 905-695-2078
DS20006347A-page 24
China - Xiamen
Tel: 86-592-2388138
China - Zhuhai
Tel: 86-756-3210040
Germany - Garching
Tel: 49-8931-9700
Germany - Haan
Tel: 49-2129-3766400
Germany - Heilbronn
Tel: 49-7131-72400
Germany - Karlsruhe
Tel: 49-721-625370
Italy - Padova
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Norway - Trondheim
Tel: 47-7288-4388
Poland - Warsaw
Tel: 48-22-3325737
Romania - Bucharest
Tel: 40-21-407-87-50
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Gothenberg
Tel: 46-31-704-60-40
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
2020 Microchip Technology Inc.
02/28/20
