MPLAD15KP85CAE3/TR

MPLAD15KP7.0A – MPLAD15KP200CA Available Surface Mount 15,000 Watt Transient Voltage Suppressor High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION These high power 15 kW rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (V WM ) of 7 volts to 200 volts in either unidirectional or bidirectional construction. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • Available in both unidirectional and bidirectional construction (bidirectional with CA suffix) High reliability with wafer fabrication and assembly lot traceability • All parts surge tested • Low profile surface mount package • Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio for more details on the screening options. • Suppresses transients up to 15,000 W @ 10/1000 μs (see Figure 1) • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • RoHS compliant versions are available • 3σ lot norm screening performed on standby current (I D ) PLAD (The cathode is the metal base under the body of this device.) Also available: PLAD30KP (30,000 watts) MPLAD30KP14A thru MPLAD30KP400CA APPLICATIONS / BENEFITS • • • • • • • Protection from switching transients and induced RFI Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1,2,3,4,5: MPLAD15KP7.0A to 200CA Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1,2,3,4: MPLAD15KP7.0A to 200CA Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance: Class 2,3: MPLAD15KP7.0A to 200CA Class 4: MPLAD15KP5.0 to 54CA Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs at 25 ºC)*: Level 4: MPLAD15KP7.0A to 200CA Level 5: MPLAD15KP7.0A to 100CA Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs at 25 ºC)*: Level 4: MPLAD15KP7.0A to 28CA *See MicroNote 132 for further temperature derating selection. MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01004, Rev F (5/16/14) ©2013 Microsemi Corporation Page 1 of 6 MPLAD15KP7.0A – MPLAD15KP200CA o MAXIMUM RATINGS @ 25 C unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Peak Pulse Power @ 10/1000 µs (2) Value Unit T J and T STG R ӨJA R ӨJC P PP -55 to +150 50 0.7 15,000