MPLAD30KP150CAE3/TR

MPLAD30KP14A – MPLAD30KP400CA Available Surface Mount 30,000 Watt Transient Voltage Suppressor High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION These high power 30 kW rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (V WM ) of 14 volts to 400 volts in either unidirectional or bidirectional construction. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • Available in both unidirectional and bidirectional construction (bidirectional with CA suffix) • High reliability with wafer fabrication and assembly lot traceability • All parts surge tested • Low profile surface mount package • Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio brochure on our web site for more details on the screening options. PLAD (The cathode is the metal base under the body of this device.) • Suppresses transients up to 30,000 W @ 10/1000 μs (see Figure 1) • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • RoHS compliant versions are available • 3σ lot norm screening performed on standby current (I D ) Also available: PLAD15KP (15,000 watts) MPLAD15KP7.0A thru MPLAD15KP200CA APPLICATIONS / BENEFITS • • • • • • • Protection from switching transients and induced RFI Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1,2,3,4,5: MPLAD30KP14A to 400CA Class 5: MPLAD30KP14A to 400CA (short distance) Class 5: MPLAD30KP14A to 220CA (long distance) Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1,2,3: MPLAD30KP14A to 400CA Class 4: MPLAD30KP14A to 220CA Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance: Class 2: MPLAD30KP10A to 400CA Class 3: MPLAD30KP14A to 220CA Class 4: MPLAD30KP14A to 110CA Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs @ 25°C)*: Level 4: MPLAD30KP14A to 400CA Level 5: MPLAD30KP14A to 260CA Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs @25°C)*: Level 4: MPLAD30KP14A to 64CA Level 5: MPLAD30KP14A to 26CA *See MicroNote 132 for further temperature derating selection. RF01005, Rev G (5/16/14) ©2013 Microsemi Corporation MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 6 MPLAD30KP14A – MPLAD30KP400CA o MAXIMUM RATINGS @ 25 C unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Peak Pulse Power @ 10/1000 µs (2) Value Unit -55 to +150 50 1.0 30,000 ºC/W ºC/W ºC/W W Unidirectional Bidirectional t clamping (0 volts to V (BR) min) Forward Clamping Voltage @ 500 Amps (3) Forward Surge Current Solder Temperature @ 10 s (5) Steady-State Power dissipation Notes: 1. 2. 3. 4. 5. Symbol T J and T STG R ӨJA R ӨJC P PP (3) T A = 25 °C T C = 100 °C