MSC2X101/100SDA120J Dual Silicon Carbide Schottky Barrier Diode
Product Overview
The Silicon Carbide (SiC) power Schottky barrier diode (SBD) product line from Microsemi increases the
performance over silicon diode solutions while lowering the total cost of ownership for high-voltage
applications. MSC2X101/100SDA120J are dual 1200 V, 100 A SiC SBD devices in a SOT-227 package.
Figure 1 • Parallel MSC2X101SDA120J
Figure 2 • Anti-parallel MSC2X100SDA120J
Features
The following are key features of the MSC2X101SDA120J and MSC2X100SDA120J devices:
• No reverse recovery
• Low forward voltage
• Low leakage current
• Avalanche-energy rated
• RoHS compliant
• Isolated voltage to 2500 V
Benefits
The following are benefits of the MSC2X101SDA120J and MSC2X100SDA120J devices:
• High switching frequency
• Low switching losses
• Low noise (EMI) switching
• Higher reliability systems
• Increased system power density
• Direct mounting to the heat sink (isolated package)
053-4109 MSC2X101/100SDA120J Datasheet Revision A
1
Product Overview
Applications
The MSC2X101SDA120J and MSC2X100SDA120J devices are designed for the following applications:
• Power factor correction (PFC)
• Anti-parallel diode
◦ Switch-mode power supply
◦ Inverters/converters
◦ Motor controllers
• Freewheeling diode
◦ Switch-mode power supply
◦ Inverters/converters
• Snubber/clamp diode
053-4109 MSC2X101/100SDA120J Datasheet Revision A
2
Device Specifications
Device Specifications
This section shows the specifications for the MSC2X101SDA120J and MSC2X100SDA120J devices.
Absolute Maximum Ratings
The following table shows the absolute maximum ratings per diode for the MSC2X101SDA120J and
MSC2X100SDA120J devices. TC = 25 °C, unless otherwise specified.
Table 1 • Absolute Maximum Ratings
Symbol
Parameter
Maximum Ratings
Unit
VR
Maximum DC reverse voltage
1200
V
IF
Maximum DC forward current
100
A
TC = 90 °C
The following table shows the thermal and mechanical characteristics of the MSC2X101SDA120J and
MSC2X100SDA120J devices.
Table 2 • Thermal and Mechanical Characteristics
Symbol
Characteristics
RΘJC
Junction-to-case thermal resistance
VISOLATION
RMS voltage
Min
Typ
Max
Unit
0.26
0.38
°C/W
2500
V
(50 Hz–60 Hz sinusoidal waveform from
terminals to mounting base for 1 minute)
TJ, TSTG
Operating junction and storage temperature range
Wt
Package weight
–55
Mounting torque, M4 screw
053-4109 MSC2X101/100SDA120J Datasheet Revision A
175
°C
1.03
oz
29.2
g
10
lbf-in
1.1
N.m
3
Device Specifications
Electrical Performance
The following table shows the static characteristics per diode of the MSC2X101SDA120J and
MSC2X100SDA120J devices.
Table 3 • Static Characteristics Per Diode
Symbol
Characteristics
Test Conditions
VF
Diode forward voltage
IF = 100 A
IRM
Reverse leakage current
VR = 1200 V
Min
Typ
Max
Unit
TJ = 25 °C
1.5
1.8
V
TJ = 175 °C
2.1
TJ = 25 °C
30
400
μA
TJ = 175 °C
500
QC
Total capacitive charge
VR = 600 V
448
nC
CJ
Junction capacitance
f = 1 MHz, VR = 400 V
492
pF
f = 1 MHz, VR = 800 V
364
053-4109 MSC2X101/100SDA120J Datasheet Revision A
4
Device Specifications
Typical Performance Curves
This section shows the typical performance curves for the MSC2X101SDA120J and MSC2X100SDA120J
devices.
Figure 3 • Maximum Transient Thermal Impedance
Figure 4 • Forward Current vs. Forward Voltage
Figure 5 • Capacitance vs. Reverse Voltage
053-4109 MSC2X101/100SDA120J Datasheet Revision A
5
Package Specification
Package Specification
This section shows the package specification of the MSC2X101SDA120J and MSC2X100SDA120J devices.
Package Outline Drawing
The following figure illustrates the SOT-227 package outline of the MSC2X101SDA120J and MSC2X100SDA120J
devices. The dimensions in the figure below are in millimeters and (inches).
Figure 6 • Package Outline Drawing
053-4109 MSC2X101/100SDA120J Datasheet Revision A
6
Legal
Microsemi
2355 W. Chandler Blvd.
Chandler, AZ 85224 USA
Within the USA: +1 (480) 792-7200
Fax: +1 (480) 792-7277
www.microsemi.com © 2020 Microsemi and
its corporate affiliates. All rights reserved.
Microsemi and the Microsemi logo are
trademarks of Microsemi Corporation and its
corporate affiliates. All other trademarks and
service marks are the property of their
respective owners.
Microsemi's product warranty is set forth in Microsemi's Sales Order Terms and Conditions. Information
contained in this publication is provided for the sole purpose of designing with and using Microsemi
products. Information regarding device applications and the like is provided only for your convenience
and may be superseded by updates. Buyer shall not rely on any data and performance specifications or
parameters provided by Microsemi. It is your responsibility to ensure that your application meets with
your specifications. THIS INFORMATION IS PROVIDED "AS IS." MICROSEMI MAKES NO REPRESENTATIONS
OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY,
PERFORMANCE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL MICROSEMI BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR
CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE WHATSOEVER RELATED TO THIS INFORMATION
OR ITS USE, HOWEVER CAUSED, EVEN IF MICROSEMI HAS BEEN ADVISED OF THE POSSIBILITY OR THE
DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT ALLOWED BY LAW, MICROSEMI’S TOTAL LIABILITY
ON ALL CLAIMS IN RELATED TO THIS INFORMATION OR ITS USE WILL NOT EXCEED THE AMOUNT OF
FEES, IF ANY, YOU PAID DIRECTLY TO MICROSEMI FOR THIS INFORMATION. Use of Microsemi devices
in life support, mission-critical equipment or applications, and/or safety applications is entirely at the
buyer’s risk, and the buyer agrees to defend and indemnify Microsemi from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any
Microsemi intellectual property rights unless otherwise stated.
Microsemi Corporation, a subsidiary of Microchip Technology Inc. (Nasdaq: MCHP),
and its corporate affiliates are leading providers of smart, connected and secure
embedded control solutions. Their easy-to-use development tools and
comprehensive product portfolio enable customers to create optimal designs which
reduce risk while lowering total system cost and time to market. These solutions
serve more than 120,000 customers across the industrial, automotive, consumer,
aerospace and defense, communications and computing markets. Headquartered
in Chandler, Arizona, the company offers outstanding technical support along with
dependable delivery and quality. Learn more at www.microsemi.com.
053-4109 | May 2020 | Released
053-4109 MSC2X101/100SDA120J Datasheet Revision A
7
很抱歉,暂时无法提供与“MSC2X100SDA120J”相匹配的价格&库存,您可以联系我们找货
免费人工找货