MSMLJ70CAE3/TR

MSMLG5.0A – MSMLG170CAe3, MSMLJ5.0A – MSMLJ170CAe3 Surface Mount 3000 Watt Transient Voltage Suppressor 1 Product Overview The MSMLG5.0A–MSMLG170CA and the MSMLJ5.0A–MSMLJ170CA series of high-reliability transient voltage suppressors (TVS) protect circuits from voltage spikes containing up to 3000 W (10/1000 μs model pulse). The SMLG gull-wing design in the DO-215AB package allows for visible solder connections. The SMLJ J-bend design in the DO-214AB package allows for greater PC board mounting density. Selections include unidirectional and bidirectional as well as RoHS-compliant versions. These are available with a variety of upscreening options for enhanced reliability. They protect against the secondary effects of lightning per IEC61000-4-5 and against voltage pulses from inductive switching environments and induced by RF radiation. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. For the latest information, visit our website www.microsemi.com. 1.1 Features The following are key features of the MSMLG5.0A through MSMLG170CAe3 and the MSMLJ5.0A through MSMLJ170CAe3 devices: High-reliability devices with fabrication and assembly lot traceability for all M prefix devices All devices are 100% surge tested 3σ lot norm screening performed on standby current (ID) for all M prefix devices Available in both unidirectional and bidirectional versions Moisture classification is “Level 1” with no dry pack required per IPC/JEDEC J-STD-020B for all M prefix devices. Enhanced reliability screening options with M prefix are available in reference to MIL-PRF-19500. Refer to High Reliability Up-Screened Plastic Products Portfolio for more details on the screening options (see Part Nomenclature for all available options). RoHS compliant versions available Axial-lead equivalent packages for thru-hole mounting are available as M5KP5.0A to M5KP110CA with 5000 W rating (contact Microsemi for other surface mount options). Microsemi Proprietary and Confidential. MSMLG5.0A–MSMLG170CAe3, MSMLJ5.0A–MSMLJ170CAe3 Datasheet Revision D 1 1.2 Applications and Benefits The following are benefits of the MSMLG5.0A through MSMLG170CAe3 and the MSMLJ5.0A through MSMLJ170CAe3 devices. Suppresses transients up to 3000 W (10/1000 µs test pulse—see Figure 2 (see page 7)) Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 Ω source impedance: Class 1 and 2: SML 5.0A to SML 170A or CA Class 3: SML 5.0A to SML 150A or CA Class 4: SML 5.0A to SML 75A or CA Secondary lightning protection per IEC 61000-4-5 with 12 Ω source impedance: Class 1: SML 5.0A to SML 170A or CA Class 2: SML 5.0A to SML 90A or CA Class 3: SML 5.0A to SML 48A or CA Class 4: SML 5.0A to SML 24A or CA Secondary lightning protection per IEC 61000-4-5 with 2 Ω source impedance: Class 2: SML 5.0A to SML 43A or CA Class 3: SML 5.0A to SML 22A or CA Class 4: SML 5.0A to SML10A or CA Microsemi Proprietary and Confidential. MSMLG5.0A–MSMLG170CAe3, MSMLJ5.0A–MSMLJ170CAe3 Datasheet Revision D 2 1.3 Part Nomenclature The following table lists the part nomenclature for the MSMLG5.0A through MSMLG170CAe3 and the MSMLJ5.0 through MSMLJ170CAe3 devices. Table 1 • MXSMLG5.0CAe3 Part Nomenclature MX Reliability level* M (controlled product) MA (aviconics grade) MX (reference JANTX) MXL (MX life) Blank = commercial *(see Hirel Non-Hermetic Product Portfolio) SM Surface-mount package L 3000 W power level G or J Gull-wing or J-bend lead frame 5.0 Reverse standoff voltage (see Typical Electrical Performance (see page 5) table) C Uni/bidirectional C = Bidirectional Blank = Undirectional A ± 5% Tolerance level e3 RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant 1.4 Symbols and Definitions The following table lists the symbols and definitions used for the MSMLG5.0A through MSMLG170CAe3 and the MSMLJ5.0 through MSMLJ170CAe3 devices. Table 2 • Symbols and Definitions Symbol Value Definition I(BR) Breakdown current The current used for measuring breakdown voltage V(BR). ID Standby current The current at the rated standoff voltage VWM. IF Forward current The forward current dc value, no alternating component. IPP Peak impulse current The peak current during the impulse. PPP Peak pulse Power The peak power dissipation resulting from peak impulse current IPP. V(BR) Minimum breakdown voltage The minimum voltage the device will exhibit at a specified current. VC Clamping voltage Clamping voltage at IPP (peak pulse current) at the specified pulse conditions (typically shown as maximum value). VWM Rated working standoff voltage The maximum peak voltage that can be applied over the operating temperature range. Microsemi Proprietary and Confidential. MSMLG5.0A–MSMLG170CAe3, MSMLJ5.0A–MSMLJ170CAe3 Datasheet Revision D 3 2 Electrical Specifications This section shows the electrical specifications for the MSMLG5.0A–MSMLG170CA and the MSMLJ5.0A– MSMLJ170CA devices. 2.1 Maximum Ratings The following table shows you the absolute maximum ratings for the MSMLG5.0A–MSMLG170CA and the MSMLJ5.0A–MSMLJ170CA devices. Table 3 • Absolute Maximum Ratings Parameter/Test Conditions Symbol Value Unit Junction and storage temperature TJ and TSTG –65 to 150 °C Thermal resistance junction-to-lead RθJL 17.5 °C/W Thermal resistance junction-to-ambient1 RθJA 77.5 Peak pulse power dissipation at 25 °C (10/1000 μs, see Figures 1, 2, and 3). PPP 3000 W Impulse repetition rate (duty factor) df 0.01 or less % tclamping