MX555LBA162M000

MX555LBA162M000 Ultra-Low Jitter 162MHz LVPECL XO ClockWorks® FUSION General Description Features The MX555LBA162M000 is an ultra-low phase jitter XO with LVPECL output optimized for high line rate applications. • 162MHz LVPECL • Typical phase noise: - 100fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability • -40°C to +85°C temperature range • Industry standard 6-Pin 5mm x 3.2mm LGA package Absolute Maximum Ratings¹ Operating Ratings² Supply Voltage (VIN)..................................................+4.6V Lead Temperature (soldering, 10s)..............................260°C Case Temperature........................................................115°C Storage Temperature (T )............................-65°C to +125°C S ESD Machine Model.....................................................200V ESD Rating (HBM).........................................................2kV Supply Voltage (VIN).......................+2.375V to +3.63V Ambient Temperature (TA)....................-40°C to +85°C Junction Thermal Resistance LGA (T ) Still Air.....................................58°C/W JA Electrical Characteristics VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 50 Ohms to VDD - 2V.³ Symbol Parameter IDD Supply Current F0 Center Frequency Condition Min. Typ. Max. Units 120 mA 162 Frequency Stability Note 4 Øj Phase Noise Integration Range (12kHz to 20MHz) Integration Range (1.875MHz to 20MHz) Tstart Start-Up Time TR/TF Rise/Fall time Duty Cycle MHz ±50 220 100 ppm fsRMS 20 ms 85 350 ps 45 55 % VOH Output High Voltage LVPECL output levels VDD - 1.35 VDD - 1.01 VDD - 0.8 V VOL Output Low Voltage LVPECL output levels VDD - 2.0 VDD - 1.78 VDD - 1.6 V Vswing Peak to Peak Output Voltage Swing 0.65 0.77 0.95 V Notes: 1. Exceeding the absolute maximum ratings may damage the device. 2. The device is not guaranteed to function outside its operating ratings. 3. Guaranteed after thermal equilibrium. 4. Inclusive of initial accuracy, temperature drift, aging, shock, vibration. ClockWorks is a registered trademark of Microchip Technology Inc. Microchip Technology Inc. October 30, 2019 MX555LB1-8413 http://www.microchip.com Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX555LBA162M000 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX555LBA162M000 MX555L BA1620 Tube 6-Pin 5mm x 3.2mm LGA MX555LBA162M000-TR MX555L BA1620 Tape and Reel 6-Pin 5mm x 3.2mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 DNC 3 GND PWR 4, 5 Q, /Q O, Diff 6 VDD PWR Pin Function Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up (Internal) Make no connection, leave floating. Power Supply Ground LVPECL Clock Output Frequency = 162MHz Power Supply Environmental Specifications Thermal Shock MIL-STD-883, Method 1011, Condition A Moisture Resistance MIL-STD-883, Method 1004 Mechanical Shock MIL-STD-883, Method 2002, Condition E Mechanical Vibration MIL-STD-883, Method 2007, Condition C Resistance to Soldering Heat J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Hazardous Substance Pb-Free / RoHS / Green Compliant Solderability JESD22-B102-D Method 2 (Preconditioning E) Terminal Strength MIL-STD-883, Method 2004, Test Condition D Gross Leak MIL-STD-883, Method 1014, Condition C Fine Leak MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s Solvent Resistance MIL-STD-202, Method 215 October 30, 2019 MX555LB1-8413 2 Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX555LBA162M000 Package Information and Recommended Land Pattern for 6-Pin LGA³ 6-Pin LGA (5x3.2mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com. Microchip Technology Inc. http://www.microchip.com Microchip makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Microchip does not assume responsibility for its use. Microchip reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Microchip's terms and conditions of sale for such products, Microchip assumes no liability whatsoever, and Microchip disclaims any express or implied warranty relating to the sale and/or use of Microchip products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. © 2019 Microchip Technology Inc. October 30, 2019 MX555LB1-8413 3 Revision 1.0 tcghelp@microchip.com