MX573ABB106M250

MX573ABB106M250 Ultra-Low Jitter 106.25MHz LVDS XO ClockWorks® FUSION General Description Features The MX573ABB106M250 is an ultra-low phase jitter XO with LVDS output optimized for high line rate applications. • 106.25MHz LVDS • Typical phase noise: - 100fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability • -40°C to +85°C temperature range • Industry standard 6-Pin 7mm x 5mm LGA package Applications • Fibre Channel 10G/12G SERDES Absolute Maximum Ratings Operating Ratings Supply Voltage (VIN)..................................................+4.6V Lead Temperature (soldering, 10s)..............................260°C Storage Temperature (TS).............................................125°C ESD Rating (HBM).........................................................2kV Supply Voltage (VIN).......................+2.375V to +3.63V Ambient Temperature (TA)....................-40°C to +85°C Electrical Characteristics VDD = 2.375 - 3.63V, TA = -40°C to +85°C, outputs terminated with 100 Ohms between Q and /Q.¹ Symbol Parameter IDD Supply Current F0 Center Frequency Condition Min. Typ. Max. Units 90 mA 106.25 Frequency Stability Note 2 Øj Phase Noise Integration Range (12kHz to 20MHz) Integration Range (1.875MHz to 20MHz) Tstart Start-Up Time TR/TF Rise/Fall time Duty Cycle MHz ±50 220 100 ppm fsRMS 20 ms 100 400 ps 45 55 % VOH Output High Voltage VOH max = VCM max + 1/2 VOD max LVDS output levels 1.248 1.375 1.602 V VOL Output Low Voltage VOL min = VCM min - 1/2 VOD max LVDS output levels 0.898 1.025 1.252 V VOD Output Differential Voltage 247 350 454 mV VCM Common Mode Output Voltage 1.125 1.2 1.375 V Notes: 1. Guaranteed after thermal equilibrium. 2. Inclusive of initial accuracy, temperature drift, aging, shock, vibration. ClockWorks is a registered trademark of Microchip Technology Inc. Microchip Technology Inc. April 12, 2017 MX573AB1-5144 http://www.microchip.com Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX573ABB106M250 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX573ABB106M250 MX573AB B106M250 Tube 6-Pin 7mm x 5mm LGA MX573ABB106M250-TR MX573AB B106M250 Tape and Reel 6-Pin 7mm x 5mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 DNC 3 GND PWR 4, 5 Q, /Q O, Diff 6 VDD PWR April 12, 2017 MX573AB1-5144 Pin Function Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up Make no connection, leave floating. Power Supply Ground LVDS Clock Output Frequency = 106.25MHz Power Supply 2 Revision 1.0 tcghelp@microchip.com Microchip Technology Inc. MX573ABB106M250 Package Information and Recommended Land Pattern for 6-Pin LGA³ 6-Pin LGA (7x5mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.microchip.com. Microchip Technology Inc. http://www.microchip.com Microchip makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Microchip does not assume responsibility for its use. Microchip reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Microchip's terms and conditions of sale for such products, Microchip assumes no liability whatsoever, and Microchip disclaims any express or implied warranty relating to the sale and/or use of Microchip products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. © 2017 Microchip Technology Inc. April 12, 2017 MX573AB1-5144 3 Revision 1.0 tcghelp@microchip.com