MX573NBD622M080

MX573NBD622M080 Ultra-Low Jitter 622.08MHz HCSL XO ClockWorks® FUSION General Description Features The MX573NBD622M080 is an ultra-low phase jitter XO with HCSL output optimized for high line rate applications. • 622.08MHz HCSL • Typical phase noise: - 109fs (Integration range: 1.875MHz-20MHz) • ±50ppm total frequency stability • -40°C to +85°C temperature range • Industry standard 6-Pin 7mm x 5mm LGA package Applications • SONET/SDH Absolute Maximum Ratings Operating Ratings Supply Voltage (VIN)..................................................+3.6V Lead Temperature (soldering, 10s)..............................260°C Storage Temperature (TS).............................................125°C ESD Rating (HBM).........................................................2kV Supply Voltage (VIN).......................+2.375V to +3.63V Ambient Temperature (TA)....................-40°C to +85°C Electrical Characteristics VDD = 2.5V ±5% or 3.3V ±10%, -40°C to +85°C, outputs terminated with 50 Ohms to VSS.¹ Symbol Parameter IDD Supply Current F0 Center Frequency Condition Min. Typ. Max. Units 95 mA 622.08 Frequency Stability Note 2 Øj Phase Noise Integration Range (12kHz to 20MHz) Integration Range (1.875MHz to 20MHz) Tstart Start-Up Time TR/TF Rise/Fall time 20%-80% Duty Cycle MHz ±50 145 109 ppm fsRMS 10 ms 150 300 450 ps 48 50 52 % VOH Output High Voltage HCSL output levels 660 700 850 mV VOL Output Low Voltage HCSL output levels -150 0 27 mV VOVS Max Output Including Overshoot VOH + 0.3 V VUDS Min Output Including Undershoot VRB VOL - 0.3 V Ringback Voltage 0.2 V VOX Absolute Crossing Point 250 350 550 mV Vswing Peak to Peak Output Voltage Swing 640 700 950 mV Notes: 1. Guaranteed after thermal equilibrium. 2. Inclusive of initial accuracy, temperature drift, aging, shock, vibration. ClockWorks is a registered trademark of Micrel, Inc Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com December 02, 2015 MX573NB1-3398 Revision 1.0 tcghelp@micrel.com or (408) 955-1690 Micrel, Inc. MX573NBD622M080 Ordering Information Ordering Part Number Marking Line 1 Marking Line 3 Shipping Package MX573NBD622M080 MX573NB D622M080 Tube 6-Pin 7mm x 5mm LGA MX573NBD622M080 TR MX573NB D622M080 Tape and Reel 6-Pin 7mm x 5mm LGA Devices are Green and RoHS compliant. Sample material may have only a partial top mark. Pin Configuration OE VDD DNC /Q GND Q Pin Description Pin Number Pin Name Pin Type Pin Level 1 OE I, SE LVCMOS 2 DNC 3 GND PWR 4, 5 Q, /Q O, Diff 6 VDD PWR December 02, 2015 MX573NB1-3398 Pin Function Output Enable, disables output to tri-state, 0 = Disabled, 1 = Enabled, 50k Ohms Pull-Up Make no connection, leave floating. Power Supply Ground HCSL Clock Output Frequency = 622.08MHz Power Supply 2 Revision 1.0 tcghelp@micrel.com or (408) 955-1690 Micrel, Inc. MX573NBD622M080 Figure 1. HCSL Output 622.08MHz 1.875MHz-20MHz 109fs Figure 2. HCSL Output 622.08MHz 12kHz-20MHz 145fs December 02, 2015 MX573NB1-3398 3 Revision 1.0 tcghelp@micrel.com or (408) 955-1690 Micrel, Inc. MX573NBD622M080 Package Information and Recommended Land Pattern for 6-Pin LGA³ 6-Pin LGA (7x5mm) Note: 3. Package information is correct as of the publication date. For updates and most current information, go to www.micrel.com. MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL +1 (408) 944-0800 FAX +1 (408) 474-1000 WEB http://www.micrel.com Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel's terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. © 2015 Micrel, Incorporated. December 02, 2015 MX573NB1-3398 4 Revision 1.0 tcghelp@micrel.com or (408) 955-1690