MXLPLAD36KP16CAE3

MPLAD36KP14A – MPLAD36KP400CA Available Surface Mount 36,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 36 kW rated transient voltage suppressors in a surface mount package are provided with design features to minimize thermal resistance and cumulative heating. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO-160, section 22 for aircraft design. This efficient low profile package design is offered in standoff voltage selections (VWM) of 14 volts to 400 volts in either unidirectional or bidirectional construction. High-Reliability screening available in reference to MIL-PRF-19500 Tested in accordance with the requirements of AEC-Q101 Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • Available in both unidirectional and bidirectional construction (bidirectional with CA suffix) • High reliability with wafer fabrication and assembly lot traceability • All parts surge tested • Low profile surface mount package • Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hirel Non-Hermetic Product Portfolio brochure on our web site for more details on the screening options. • Suppresses transients up to 36,000 W @ 10/1000 μs (see Figure 1) • Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B • RoHS compliant versions are available PLAD (The cathode is the metal base under the body of this device.) • 3σ lot norm screening performed on standby current (ID) APPLICATIONS / BENEFITS • Protection from switching transients and induced RFI • Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 • Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1,2,3,4,5: MPLAD36KP14A to 400CA Class 5: MPLAD36KP14A to 400CA (short distance) Class 5: MPLAD36KP14A to 260CA (long distance) • Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1,2,3: MPLAD36KP14A to 400CA Class 4: MPLAD36KP14A to 280CA • Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance: Class 2: MPLAD36KP10A to 400CA Class 3: MPLAD36KP14A to 260CA Class 4: MPLAD36KP14A to 130CA • Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs @ 25°C)*: Level 4: MPLAD36KP14A to 400CA Level 5: MPLAD36KP14A to 300CA • Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs @25°C)*: Level 4: MPLAD36KP14A to 78CA Level 5: MPLAD36KP14A to 38CA *See MicroNote 132 for further temperature derating selection. RF01216, Rev B (12/15/16) 1 MPLAD36KP14A – MPLAD36KP400CA MAXIMUM RATINGS @ 25°C unless otherwise specified Symbol TJ and TSTG Parameters / Test Conditions Value Junction and Storage Temperature -55 to +150 RθJA Thermal Resistance Junction-to-Ambient (1) 50 RθJC Thermal Resistance Junction-to-Case 1.0 PPP Peak Pulse Power @ 10/1000 μs (2) tclamping (0 volts to V(BR min) Undirectional Bidirectional VFS Forward Clamping Voltage @ 500 Amps (3) IFSM Forward Surge Current TSP PD Notes: 1. 2. 3. 4. 5. °C/W 36,000 W