MXLPLAD7.5KP11A

MPLAD7.5KP10A(e3) – MPLAD7.5KP48CA(e3) Available 7.5 kW, Unidirectional and Bidirectional TVS Protection Device High-Reliability screening available in reference to MIL-PRF-19500 DESCRIPTION These 7.5 kW rated transient voltage suppressors (TVS) in a surface mount PLAD package are provided with design features to minimize thermal resistance and cumulative heating. These devices have the ability to clamp dangerous high voltage, short term transients such as those produced by electrostatic discharge, radiated RFI, inductive load dumps, and the secondary effects of lightning strikes before they reach sensitive component regions of a circuit. Typical applications include lightning and automotive load dump protection. They are particularly effective at meeting the multi-stroke lightning standard RTCA DO160, section 22 for aircraft design. The all-metal bottom of this space-efficient, low profile package provides a very low thermal impedance path for heat to escape to the mounting substrate, keeping the junction temperature low. The PLAD7.5KP is offered with standoff voltages (Vwm) from 10 to 48 volts in either unidirectional or bidirectional versions. For more information on PLAD packaged products and our broad range of TVS solutions, please see our website. Tested in accordance with the requirements of AEC-Q101 Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • • • • Available in both unidirectional and bidirectional construction (bidirectional with CA suffix) High-reliable, with wafer fabrication and assembly lot traceability All parts 100% surge tested Low profile surface mount package Optional upscreening is available with various screening and conformance inspection options based on MIL-PRF-19500. Refer to Hi-Rel Non-Hermetic Products brochure on our web site for more details on the screening options Suppresses transients up to 7,500 W @ 10/1000 μs (see Figure 1) Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020 3σ lot norm screening performed on standby current (ID) RoHS compliant (2002/95/EC) devices available Halogen free (IEC 61249-2-21) mini-PLAD (The cathode is the heatsink under the body of this device.) APPLICATIONS / BENEFITS • • • • • • • • • • • • Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 ohms source impedance: Class 1,2,3,4,5: MPLAD7.5KP10A to 48CA Secondary lightning protection per IEC 61000-4-5 with 12 ohms source impedance: Class 1,2,3,4: MPLAD7.5KP10A to 48CA Secondary lightning protection per IEC 61000-4-5 with 2 ohms source impedance: Class 2,3: MPLAD7.5KP10A to 48CA Class 4: MPLAD7.5KP10A to 26CA Pin injection protection per RTCA/DO-160F for Waveform 4 (6.4/69 μs at 25 ºC)*: Level 1,2,3,4,5: MPLAD7.5KP10A to 48CA Pin injection protection per RTCA/DO-160F for Waveform 5A (40/120 μs at 25 ºC)*: Level 1, 2, 3: MPLAD7.5KP10A to 48CA Level 4: MPLAD7.5KP10A to 14CA Longer transient pulse width capability if well heat sunk for automotive load dump IPP rating of 97 amps to 441 amps VWM rating of 10 volts to 48 volts V(BR)(min) range of 11.1 volts to 53.3 volts VC(MAX) rating of 17 volts to 77.4 volts *See MicroNote 132 for further temperature derating selection. RF01084, Rev B (24/6/15) ©2015 Microsemi Corporation MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 6 MPLAD7.5KP10A(e3) – MPLAD7.5KP48CA(e3) o MAXIMUM RATINGS @ 25 C unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case Peak Pulse Power @ 10/1000 µs (2) Value Unit -55 to +150 50 1.5 7,500 ºC/W ºC/W ºC/W W Unidirectional Bidirectional tclamping (0 volts to V(BR) min) Forward Clamping Voltage @ 400 Amps (3) Forward Surge Current Solder Temperature @ 10 s (5) Rated Average Power dissipation Notes: 1. 2. 3. 4. 5. Symbol TJ and TSTG RӨJA RӨJC PPP (3)