PIC12HV752-E/SN

PIC16F753/HV753 14-Pin Flash-Based, 8-Bit CMOS Microcontrollers with Intelligent Analog High-Performance RISC CPU: Low-Power Features: • Only 35 Instructions to Learn • All Single-Cycle Instructions except Branches • Operating Speed: - DC – 20 MHz clock input - DC – 200 ns instruction cycle • 2048 x 14 On-Chip Flash Program Memory • Self Read/Write Program Memory • Interrupt Capability with Automatic Context Saving • 8-Level Deep Hardware Stack • Direct, Indirect and Relative Addressing modes • Standby Current: - 50 nA @ 2.0V, typical • Operating Current: - 11 A @ 32 kHz, 2.0V, typical - 260 A @ 4 MHz, 2.0V, typical • Watchdog Timer Current: - 40 years • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins  2012 Microchip Technology Inc. Peripheral Features: • 11 I/O Pins (1 input-only pin): • High Current Sink/Source: - 50 mA I/O (2 pins) - 25 mA I/O (9 pins) • Two High-Speed Analog Comparator Modules: - 50 ns response time - Fixed Voltage Reference (FVR) - Programmable on-chip voltage reference via integrated 9-bit DAC - Internal/external inputs and outputs (selectable) - Built-in Hysteresis (software selectable) • Analog-to-Digital Converter (ADC): - 10-bit resolution - Eight external channels - Two internal reference voltage channels • Operational Amplifier: - Three terminal operation - Internal connections to DAC and FVR • Digital-to-Analog Converter (DAC): - 9-bit resolution - Full range resolution - 4 mV steps at 2.0V • Fixed Voltage Reference (FVR), 1.2V Reference • Capture, Compare, PWM (CCP) Module: - 16-bit Capture, max. resolution 12.5 ns - 16-bit Compare, max. resolution 200 ns - 10-bit PWM, max. frequency 20 kHz • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Timer1 gate (count enable) - Four selectable clock sources • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler Advance Information DS41656A-page 1 PIC16F753/HV753 Peripheral Features (Continued): • Complementary Output Generator (COG): - Slope Compensation Circuit for use with SMPS power supplies - Complementary Waveforms for Full and HalfBridge topologies - Two I/O (50 mA) for direct MOSFET drive - Rising and/or Falling edge input sources for flexible control topologies - Phase, Blanking dead-band control - Auto-shutdown - Hardware Limit Timer (HLT) - 8-bit Timer with prescaler - 8-bit period register and postscaler - Asynchronous H/W Reset sources Debug(1) Shunt Regulator Operational Amplifiers DAC Complementary Output Generator (COG) CCP Timers (8/16-bit) Comparators 10-bit ADC (ch) I/O’s(2) Data SRAM (bytes) Self Read/Write Flash Memory Program Memory Flash (words) Device Data Sheet Index PIC12F752/HV752/PIC16F753/HV753 Family Types PIC12F752 (1) 1K Y 64 6 4 2 3/1 1 Y 5-bit N N H PIC12HV752 (1) 1K Y 64 6 4 2 3/1 1 Y 5-bit N Y H PIC16F753 (2) 2K Y 128 12 8 2 3/1 1 Y 9-bit Y N I/H PIC16HV753 (2) 2K Y 128 12 8 2 3/1 1 Y 9-bit Y Y I/H Note 1: I - Debugging, Integrated on Chip; H – Debugging, Available using Debug Header 2: One pin is input-only. Data Sheet Index: 1: DS41576 PIC12F752/HV752 Data Sheet, 8-Pin, Flash-Based 8-Bit CMOS Microcontrollers. 2: Future Release PIC16F753/HV753 Data Sheet, 14-Pin, Flash-Based 8-Bit CMOS Microcontrollers with Intelligent Analog. Note: For other small form-factor package availability and marking information, please visit http://www.microchip.com/packaging or contact your local sales office. DS41656A-page 2 Advance Information  2012 Microchip Technology Inc. PIC16F753/HV753 FIGURE 1: 14-PIN PDIP, SOIC, TSSOP DIAGRAM FOR PIC16F753/HV753 PDIP, SOIC, TSSOP 1 14 RA5 RA4 2 13 VSS RA0/ICSPDAT 12 RA1/ICSPCLK 11 RA2 10 RC0 9 RC1 8 RC2 MCLR/VPP/RA3 3 4 RC5 5 RC4 6 RC3 7 PIC16F753/HV753 VDD Note: See Table 1 for location of all peripheral functions. FIGURE 2: 16-PIN QFN DIAGRAM FOR PIC16F753/HV753 VDD NC NC Vss QFN (4x4) 16 15 14 13 RA5 RA4 MCLR/VPP/RA3 RC5 1 12 2 PIC16F753/HV75311 3 10 4 9 RA0/ICSPDAT RA1/ICSPCLK RA2 RC0 RC4 RC3 RC2 RC1 5 6 7 8 Note: See Table 1 for location of all peripheral functions.  2012 Microchip Technology Inc. Advance Information DS41656A-page 3 PIC16F753/HV753 14-Pin PDIP/SOIC/TSSOP 16-Pin QFN ADC Reference Op Amp Comparator Timer CCP Interrupt Pull-Up Basic 14-PIN ALLOCATION TABLE (PIC16F753/HV753) I/O TABLE 1: RA0 13 12 AN0 FVROUT DACOUT — C1IN0+ — — IOC Y ICSPDAT RA1 12 11 AN1 VREF FVRIN — C1IN0C2IN0- — — IOC Y ICSPCLK RA2 11 10 AN2 C0G1FLT — C1OUT T0CKI — INT IOC Y — RA3 4 3 — — — — T1G(2) — IOC Y MCLR (1) CLKOUT RA4 3 2 AN3 — — — T1G — IOC Y RA5 2 1 — — — — T1CKI — IOC Y RC0 10 9 AN4 — OPA1IN+ C2IN0+ — — IOC — — RC1 9 8 AN5 — OPA1IN- C1IN1C2IN1- — — IOC — — RC2 8 7 AN6 — OPA1OUT C1IN2C2IN2- — — IOC — — RC3 7 6 AN7 — — C1IN3C2IN3- — — IOC — — RC4 6 5 — COG1OUT1 — C2OUT — — IOC — — RC5 5 4 — COG1OUT0 — — — CCP1 IOC — — VDD 1 16 — — — — — — — — VDD VSS 14 13 — — — — — — — — VSS Note 1: 2: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. Alternate location for peripheral pin function selected by the APFCON register. DS41656A-page 4 Advance Information  2012 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2012, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 9781620766514 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 ==  2012 Microchip Technology Inc. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. Advance Information DS41656A-page 5 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Osaka Tel: 81-66-152-7160 Fax: 81-66-152-9310 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Kaohsiung Tel: 886-7-213-7828 Fax: 886-7-330-9305 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 DS41656A-page 6 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Advance Information 10/26/12  2012 Microchip Technology Inc.