PIC16LF1455-E/P

PIC16(L)F145X 14/20-Pin, 8-Bit Flash USB Microcontroller Product Brief High-Performance RISC CPU: • • • • • C Compiler Optimized Architecture Only 49 Instructions 14 Kbytes Linear Program Memory Addressing 1024 bytes Linear Data Memory Addressing Operating Speed: - DC – 48 MHz clock input - DC – 83 ns instruction cycle - Selectable 3x or 4x PLL for specific frequencies • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) capable of accessing both data or program memory - FSRs can read program and data memory Special Microcontroller Features: • Operating Voltage Range: - 1.8V to 3.6V (PIC16LF145X) - 2.3V to 5.5V (PIC16F145X) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Brown-Out Reset (BOR) • Low-Power BOR (LPBOR) • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Power-Saving Sleep mode Universal Serial Bus (USB) Features: • Self-tuning from USB host (eliminates need for external crystal) • USB V2.0 Compliant SIE • Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s) • Supports Control, Interrupt, Isochronous and Bulk Transfers • Supports up to 8 Bidirectional Endpoints • 512-Byte Dual Access RAM for USB • Interrupt-on-Change (IOC) on D+/D- for USB Host Detection • Configurable Internal Pull-up Resistors for use with USB  2011-2012 Microchip Technology Inc. Low-Power Features PIC16LF145X with XLP: • Standby Current: - 20 nA @ 1.8V, typical • Watchdog Timer Current: - 300 nA @ 1.8V, typical • Operating Current: - 30 A/MHz @ 1.8V, typical • Timer1 Oscillator: - 600 nA @ 32 kHz, 1.8V, typical Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±0.25%, typical - Software selectable frequency range from 16 MHz to 31 kHz - Tunable to 0.25% across temperature range - 48 MHz with 3x PLL • 31 kHz Low-Power Internal Oscillator • Clock Switching with run from: - Primary Oscillator - Secondary Oscillator (SOSC) - Internal Oscillator • Clock Reference Output: - Clock Prescaler - CLKOUT Analog Features(1): • Analog-to-Digital Converter (ADC): - 10-bit resolution - Up to 9 external channels - Two internal channels: - Fixed Voltage Reference channel - DAC output channel - Auto acquisition capability - Conversion available during Sleep • Two Comparators: - Rail-to-rail inputs - Power mode control - Software controllable hysteresis • Voltage Reference module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels • Up to one rail-to-rail resistive 5-bit DAC with positive reference selection Note 1: Advance Information Analog features are not available on PIC16(L)F1454 devices. DS41617B-page 1 PIC16(L)F145X Peripheral Features: • Up to 14 I/O Pins and three Input-only Pins: - High current sink/source 25 mA/25 mA - Individually programmable weak pull-ups - Individually programmable Interrupt-On-Change (IOC) pins • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Two 10-bit PWM modules • Complementary Waveform Generator (CWG)(1): - Up to four selectable signal sources - Selectable falling and rising edge dead-band control - Polarity control - Up to four auto-shutdown sources - Multiple input sources: PWM, Comparators • Master Synchronous Serial Port (MSSP) with SPI and I2C™ with: - 7-bit address masking - SMBus/PMBus™ compatibility • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART): - RS-232, RS-485 and LIN compatible - Auto-baud detect - Auto-wake-up on Start Note 1: Not available on PIC16(L)F1454 devices. PIC16(L)F1454 (1) 8192 1024 11 — — — 2/1 2 1 1 — 1 1 I/H PIC16(L)F1455 (1) 8192 1024 11 5 2 1 2/1 2 1 1 1 1 1 I/H PIC16(L)F1459 (1) 8192 1024 17 9 2 1 2/1 2 1 1 1 1 1 I/H Note 1: I - Debugging, Integrated on Chip; H - Debugging, Available using Debug Header; E - Emulation, Available using Emulation Header. 2: Three pins are input-only. Data Sheet Index: 1: Future Product PIC16(L)F1454/1455/1459 Data Sheet, 14/20-Pin Flash, 8-Bit USB Microcontrollers. DS41617B-page 2 Advance Information XLP Debug(1) Clock Reference USB CWG MSSP (I2C™/SPI) EUSART PWM Timers (8/16-bit) DAC Comparators 10-bit ADC (ch) I/O’s(2) Data SRAM (bytes) Program Memory Flash (words) Device Data Sheet Index PIC16(L)F145X Family Types Y Y Y  2011-2012 Microchip Technology Inc. PIC16(L)F145X FIGURE 1: 14-PIN PDIP, SOIC, TSSOP DIAGRAM FOR PIC16(L)F1454/1455 PDIP, SOIC, TSSOP 1 RA5 RA4 2 MCLR/VPP/RA3 3 4 RC5 5 RC4 6 RC3 7 13 VSS RA0/D+/ICSPDAT(1) 12 RA1/D-/ICSPCLK(1) 11 VUSB3V3 10 RC0/ICSPDAT 9 RC1/ICSPCLK 8 RC2 14 PIC16(L)F1454/1455 VDD Note 1: LVP support for PIC18(L)F1XK50 legacy designs. 2: See Table 1 for location of all peripheral functions. Vss VDD QFN (4x4) NC 16-PIN QFN DIAGRAM FOR PIC16(L)F1454/1455 NC FIGURE 2: MCLR/VPP/RA3 3 RC5 4 12 RA0/D+/ICSPDAT(1) 11 RA1/D-/ICSPCLK(1) 10 VUSB3V3 9 5 6 7 8 ICSPCLK/RC1 2 RC2 RA4 RC3 1 RC4 RA5 PIC16(L)F1454/1455 16 15 14 13 RC0/ICSPDAT Note 1: LVP support for PIC18(L)F1XK50 legacy designs. 2: See Table 1 for location of all peripheral functions.  2011-2012 Microchip Technology Inc. Advance Information DS41617B-page 3 PIC16(L)F145X FIGURE 3: 20-PIN PDIP, SOIC, SSOP DIAGRAM FOR PIC16(L)F1459 PDIP, SOIC, SSOP 20 2 19 VSS RA0/D+/ICSPDAT(1) RA4 18 RA1/D-/ICSPCLK(1) MCLR/VPP/RA3 3 4 17 VUSB3V3 RC5 5 16 RC0/ICSPDAT RC4 6 RC3 7 RC6 8 PIC16(L)F1459 1 RA5 VDD 15 RC1/ICSPCLK 14 RC2 13 RB4 RC7 9 12 RB5 RB7 10 11 RB6 Note 1: LVP support for PIC18(L)F1XK50 legacy designs. 2: See Table 1 for location of all peripheral functions. 20-PIN QFN DIAGRAM FOR PIC16(L)F1459 RA4 RA5 VDD Vss RA0/D+/ICSPDAT(1) FIGURE 4: QFN (5x5) MCLR/VPP/RA3 RC5 RC4 RC3 RC6 1 2 3 4 5 PIC16(L)F1459 20 19 18 17 16 15 14 13 12 11 RA1/D-/ICSPCLK(1) VUSB3V3 RC0/ICSPDAT RC1/ICSPCLK RC2 RC7 RB7 RB6 RB5 RB4 6 7 8 9 10 Note 1: LVP support for PIC18(L)F1XK50 legacy designs. 2: See Table 1 for location of all peripheral functions. DS41617B-page 4 Advance Information  2011-2012 Microchip Technology Inc. PIC16(L)F145X 14-Pin PDIP/SOIC/TSSOP 16-Pin QFN ADC Reference Comparator Timer CWG USB EUSART PWM MSSP Interrupt Basic 14-PIN ALLOCATION TABLE (PIC16(L)F1454) I/O TABLE 1: RA0 13 12 — — — — — D+ — — — IOC ICSPDAT(3) RA1 12 11 — — — — — D- — — — IOC ICSPCLK(3) RA2 — — — — — — — — — — — — — RA3 4 3 — — — T1G(2) — — — — SS(2) IOC MCLR VPP RA4 3 2 — — — SOSCO T1G(1) — — — — SDO(2) IOC CLKOUT OSC2 CLKR(1) RA5 2 1 — — — SOSCI T1CKI — — — PWM2(2) — IOC CLKIN OSC1 RC0 10 9 — — — — — — — — SCL SCK — ICSPDAT RC1 9 8 — — — — — — — — SDA SDI INT ICSPCLK RC2 8 7 — — — — — — — — SDO(1) — — SS(1) — CLKR(2) PWM2 (1) RC3 7 6 — — — — — — — RC4 6 5 — — — — — — TK CK — — — — RC5 5 4 — — — T0CKI — — RX DT PWM1 — — — VDD 1 16 — — — — — — — — — — VDD VSS 14 13 — — — — — — — — — — VSS VUSB3V3 11 10 — — — — — VUSB3V3 — — — — — Note 1: 2: 3: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. Alternate location for peripheral pin function selected by the APFCON register. LVP support for PIC18(L)F1XK50 legacy designs.  2011-2012 Microchip Technology Inc. Advance Information DS41617B-page 5 PIC16(L)F145X 14-Pin PDIP/SOIC/TSSOP 16-Pin QFN ADC Reference Comparator Timer CWG USB EUSART PWM MSSP Interrupt Basic 14-PIN ALLOCATION TABLE (PIC16(L)F1455) I/O TABLE 2: RA0 13 12 — — — — — D+ — — — IOC ICSPDAT(3) RA1 12 11 — — — — — D- — — — IOC ICSPCLK(3) RA2 — — — — — — — — — — — — — RA3 4 3 — — — T1G(2) — — — — SS(2) IOC MCLR VPP RA4 3 2 AN3 — — SOSCO T1G(1) — — — — SDO(2) IOC CLKOUT OSC2 CLKR(1) RA5 2 1 — — — SOSCI T1CKI — — — PWM2(2) — IOC CLKIN OSC1 RC0 10 9 AN4 VREF+ C1IN+ C2IN+ — — — — — SCL SCK — ICSPDAT RC1 9 8 AN5 — C1IN1C2IN1- — CWGFLT — — — SDA SDI INT ICSPCLK RC2 8 7 AN6 DACOUT1 C1IN2C2IN2- — — — — — SDO(1) — — RC3 7 6 AN7 DACOUT2 C1IN3C2IN3- — — — — PWM2(1) SS(1) — CLKR(2) RC4 6 5 — — C1OUT C2OUT — CWG1B — TK CK — — — — RC5 5 4 — — — T0CKI CWG1A — RX DT PWM1 — — — VDD 1 16 — — — — — — — — — — VDD VSS 14 13 — — — — — — — — — — VSS VUSB3V3 11 10 — — — — — VUSB3V3 — — — — — Note 1: 2: 3: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. Alternate location for peripheral pin function selected by the APFCON register. LVP support for PIC18(L)F1XK50 legacy designs. DS41617B-page 6 Advance Information  2011-2012 Microchip Technology Inc. PIC16(L)F145X 20-Pin PDIP/SOIC/SSOP 20-Pin QFN ADC Reference Comparator Timer CWG USB EUSART PWM MSSP Interrupt Basic 20-PIN ALLOCATION TABLE (PIC16(L)F1459) I/O TABLE 3: RA0 19 16 — — — — — D+ — — — IOC ICSPDAT(3) RA1 18 15 — — — — — D- — — — IOC ICSPCLK(3) RA2 — — — — — — — — — — — — — RA3 4 1 — — — T1G(2) — — — — SS(2) IOC MCLR VPP RA4 3 20 AN3 — — SOSCO T1G(1) — — — — — IOC OSC2 CLKOUT CLKR(1) RA5 2 19 — — — SOSCI T1CKI — — — — — IOC OSC1 CLKIN RB4 13 10 AN10 — — — — — — — SDA SDI IOC — RB5 12 9 AN11 — — — — — RX DX — — IOC — RB6 11 8 — — — — — — — — SCL SCK IOC — RB7 10 7 — — — — — — TX CK — — IOC — RC0 16 13 AN4 VREF+ C1IN+ C2IN+ — — — — — — — ICSPDAT RC1 15 12 AN5 — C1IN1C2IN1- — CWGFLT — — — — INT ICSPCLK RC2 14 11 AN6 DACOUT1 C1IN2C2IN2- — — — — — — — — RC3 7 4 AN7 DACOUT2 C1IN3C2IN3- — — — — — — — CLKR(2) RC4 6 3 — — C1OUT C2OUT — CWG1B — — — — — — RC5 5 2 — — — T0CKI CWG1A — — PWM1 — — — — RC6 8 5 AN8 — — — — — — PWM2 RC7 9 6 AN9 — — — — — — — SDO — — VDD 1 18 — — — — — — — — — — VDD VSS 20 17 — — — — — — — — — — VSS VUSB3V3 17 14 — — — — — VUSB3V3 — — — — — Note 1: 2: 3: SS — (1) Default location for peripheral pin function. Alternate location can be selected using the APFCON register. Alternate location for peripheral pin function selected by the APFCON register. LVP support for PIC18(L)F1XK50 legacy designs.  2011-2012 Microchip Technology Inc. Advance Information DS41617B-page 7 PIC16(L)F145X NOTES: DS41617B-page 8 Advance Information  2011-2012 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2011-2012, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 9781620762202 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 ==  2011-2012 Microchip Technology Inc. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. Advance Information DS41617B-page 9 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Osaka Tel: 81-66-152-7160 Fax: 81-66-152-9310 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-330-9305 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 DS41617B-page 10 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Advance Information 11/29/11  2011-2012 Microchip Technology Inc.