PIC12(L)F1501/PIC16(L)F150X
8/14/20-Pin, 8-Bit Flash Microcontrollers Product Brief
High-Performance RISC CPU:
• C Compiler Optimized Architecture
• Only 49 Instructions
• Up to 14 Kbytes Linear Program Memory
Addressing
• Up to 512 bytes Linear Data Memory Addressing
• Operating Speed:
- DC – 20 MHz clock input
- DC – 125 ns instruction cycle
• Interrupt Capability with Automatic Context
Saving
• 16-Level Deep Hardware Stack with Optional
Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes:
- Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
Flexible Oscillator Structure:
• 16 MHz Internal Oscillator Block:
- Factory calibrated to ±1%, typical
- Software selectable frequency range from
16 MHz to 31 kHz
• 31 kHz Low-Power Internal Oscillator
• Three External Clock modes up to 20 MHz
Special Microcontroller Features:
• Operating Voltage Range:
- 1.8V to 3.6V (PIC12LF1501/PIC16LF150X)
- 2.3V to 5.5V (PIC12F1501/PIC16F150X)
• Self-Programmable under Software Control
• Power-on Reset (POR)
• Power-up Timer (PWRT)
• Programmable Low-Power Brown-Out Reset
(LPBOR)
• Extended Watchdog Timer (WDT):
- Programmable period from 1 ms to 256s
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™) via Two
Pins
• Enhanced Low-Voltage Programming (LVP)
• Power-Saving Sleep mode:
- Low-Power Sleep mode
- Low-Power BOR (LPBOR)
• Integrated Temperature Indicator
2011 Microchip Technology Inc.
Low-Power Features
(PIC12LF1501/PIC16LF150X):
• Standby Current:
- 20 nA @ 1.8V, typical
• Watchdog Timer Current:
- 300 nA @ 1.8V, typical
• Operating Current:
- 30 A/MHz @ 1.8V, typical
• Timer1 Oscillator:
- 600 nA @ 32 kHz, 1.8V, typical
(PIC16LF1508/09 devices only)
Peripheral Features:
• Analog-to-Digital Converter (ADC):
- 10-bit resolution
- Up to 12 external channels
- 2 internal channels:
- Fixed Voltage Reference channel
- Temperature Indicator channel
- Auto acquisition capability
- Conversion available during Sleep
• Up to 2 Comparators:
- Rail-to-rail inputs
- Power mode control
- Software controllable hysteresis
• Voltage Reference module:
- Fixed Voltage Reference (FVR) with 1.024V,
2.048V and 4.096V output levels
- Up to 1 rail-to-rail resistive 5-bit DAC with
positive and negative reference selection
• Up to 17 I/O Pins and 1 Input-only Pin:
- High current sink/source 25 mA/25 mA
- Individually programmable weak pull-ups
- Individually programmable interrupt-onchange (IOC) pins
• Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
• Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
• Timer2: 8-Bit Timer/Counter with 8-Bit Period
Register, Prescaler and Postscaler
• Four 10-bit PWM modules
• Up to 1 Master Synchronous Serial Port (MSSP)
with SPI and I2C™ with:
- 7-bit address masking
- SMBus/PMBus™ compatibility
• Up to 1 Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART):
- RS-232, RS-485 and LIN compatible
Advance Information
DS41454C-page 1
PIC12(L)F1501/PIC16(L)F150X
- Auto-baud detect
- Auto-wake-up on Start
• Up to 4 Configurable Logic Cell (CLC) modules:
- Up to 16 selectable input source signals
- Four inputs per module
- Software control of combinational/sequential
logic/state/clock functions
- AND/OR/XOR/D Flop/D Latch/SR/JK
- External or internal inputs/outputs
- Operation while in Sleep
• Numerically Controlled Oscillator (NCO):
- 20-bit accumulator
- 16-bit increment
- True linear frequency control
- High-speed clock input
- Selectable Output modes
- Fixed Duty Cycle (FDC)
- Pulse Frequency Modulation (PFM)
TABLE 1:
• Complementary Waveform Generator (CWG):
- Up to 8 selectable signal sources
- Selectable falling and rising edge dead-band
control
- Polarity control
- Up to 4 auto-shutdown sources
- Multiple input sources: PWM, CLC, NCO
PIC12(L)F1501/PIC16(L)F150X FAMILY TYPES
Program
SRAM
10-bit A/D
Timers
I/Os
Comparators DAC
PWM EUSART MSSP CWG CLC NCO ICD XLP
Memory Flash
(bytes)
(ch)
8/16-bit
(words)
Device
PIC12F1501
PIC12LF1501
1024
64
6
4
1
1
2/1
4
—
—
1
2
1
—
—
PIC16F1503
PIC16LF1503
2048
128
12
8
2
1
2/1
4
—
1
1
2
1
—
—
PIC16F1507
PIC16LF1507
2048
128
18
12
—
—
2/1
4
—
—
1
2
1
—
—
PIC16F1508
PIC16LF1508
4096
256
18
12
2
1
2/1
4
1
1
1
4
1
V3
X
PIC16F1509
PIC16LF1509
8192
512
18
12
2
1
2/1
4
1
1
1
4
1
V3
X
Note:
Pin details are subject to change.
FIGURE 1:
8-PIN PDIP, SOIC, MSOP, DFN DIAGRAM FOR PIC12(L)F1501
VDD
1
RA5
2
RA4
3
MCLR/VPP/RA3
4
PIC12(L)F1501
PDIP, SOIC, MSOP, DFN (2X3)
8
VSS
7
RA0/ICSPDAT
6
RA1/ICSPCLK
5
RA2
Note: See Table 2 for location of all peripheral functions.
DS41454C-page 2
Advance Information
2011 Microchip Technology Inc.
PIC12(L)F1501/PIC16(L)F150X
FIGURE 2:
14-PIN PDIP, SOIC, TSSOP DIAGRAM FOR PIC16(L)F1503
PDIP, SOIC, TSSOP
1
14
RA5
RA4
2
13
VSS
RA0/ICSPDAT
12
RA1/ICSPCLK
11
RA2
10
RC0
9
RC1
8
RC2
MCLR/VPP/RA3
3
4
RC5
5
RC4
6
RC3
7
PIC16(L)F1503
VDD
Note: See Table 3 for location of all peripheral functions.
FIGURE 3:
16-PIN QFN DIAGRAM FOR PIC16(L)F1503
VDD
NC
NC
Vss
QFN (3x3)
RA5
RA4
MCLR/VPP/RA3
RC5
1
2
3
4
PIC16(L)F1503
16 15 14 13
12
11
10
9
- RA0/ICSPDAT
RA1/ICSPCLK
RA2
RC0
RC4
RC3
RC2
RC1
5 6 7 8
Note: See Table 3 for location of all peripheral functions.
2011 Microchip Technology Inc.
Advance Information
DS41454C-page 3
PIC12(L)F1501/PIC16(L)F150X
FIGURE 4:
20-PIN PDIP, SOIC, SSOP DIAGRAM FOR PIC16(L)F1507/8/9
PDIP, SOIC, SSOP
1
20
2
19
VSS
RA0/ICSPDAT
3
4
18
RA1/ICSPCLK
MCLR/VPP/RA3
PIC16(L)F1507/8/9
VDD
RA5
RA4
17
RA2
16
RC0
15
RC1
14
RC2
13
RB4
9
12
RB5
10
11
RB6
RC5
5
RC4
6
RC3
RC6
7
RC7
RB7
8
Note 1: See Table 4 for location of all PIC16(L)F1507 peripheral functions.
2: See Table 5 for location of all PIC16(L)F1508/9 peripheral functions
20-PIN QFN DIAGRAM FOR PIC16(L)F1507/8/9
RA4
RA5
VDD
Vss
RA0/ICSPDAT
FIGURE 5:
QFN (4x4)
MCLR/VPP/RA3
RC5
RC4
RC3
RC6
1
2
3
4
5
PIC16(L)F1507/8/9
20 19 18 17 16
15
14
13
12
11
-
RA1/ICSPCLK
RA2
RC0
RC1
RC2
RC7
RB7
RB6
RB5
RB4
6 7 8 9 10
Note 1: See Table 4 for location of all PIC16(L)F1507 peripheral functions.
2: See Table 5 for location of all PIC16(L)F1508/9 peripheral functions
DS41454C-page 4
Advance Information
2011 Microchip Technology Inc.
PIC12(L)F1501/PIC16(L)F150X
8-Pin PDIP/SOIC/MSOP/DFN
ADC
Reference
Comparator
Timer
CWG
NCO
CLC
PWM
Interrupt
Basic
8-PIN ALLOCATION TABLE (PIC12(L)F1501)
I/O
TABLE 2:
RA0
7
AN0
DACOUT1
C1IN+
—
CWGB(1)
—
CLC2IN1
PWM2
IOC
ICSPDAT
RA1
6
AN1
VREF+
C1IN0-
—
—
NCOOUT(1)
CLC2IN0
—
IOC
ICSPCLK
RA2
5
AN2
DACOUT2
C1OUT
T0CKI
CWGA(1)
CWGFLT
—
INT
IOC
—
RA3
4
—
—
—
T1G(2)
—
—
IOC
MCLR
VPP
RA4
3
AN3
—
C1IN1-
T1G(1)
CWGB(2)
—
IOC
CLKOUT
NCOCLK
NCOOUT(2)
CLC2OUT
CLC1IN1
PWM4
IOC
CLKIN
CLC1OUT(1) PWM1
CLC1IN0
—
CLC1OUT(2) PWM3
RA5
2
—
—
—
T1CKI
CWGA(2)
VDD
1
—
—
—
—
—
—
—
—
—
VDD
VSS
8
—
—
—
—
—
—
—
—
—
VSS
Note 1: Default location for peripheral pin function. Alternate location can be selected using the APFCON register.
2: Alternate location for peripheral pin function selected by the APFCON register.
16-Pin QFN
ADC
Reference
Comparator
Timer
CWG
NCO
CLC
PWM
MSSP
Interrupt
RA0
13
12
AN0
DACOUT1
C1IN+
—
—
—
—
—
—
IOC
ICSPDAT
RA1
12
11
AN1
VREF+
C1IN0C2IN0-
—
—
—
—
—
—
IOC
ICSPCLK
RA2
11
10
AN2
DACOUT2
C1OUT
T0CKI
CWGFLT
—
CLC1OUT(1)
PWM3
—
INT
IOC
—
RA3
4
3
—
—
—
T1G(2)
—
—
CLC1IN0
—
SS(2)
IOC
MCLR
VPP
RA4
3
2
AN3
—
—
T1G(1)
—
NCOOUT(2)
—
—
SDO(2)
IOC
CLKOUT
RA5
2
1
—
—
—
T1CKI
—
NCOCLK
CLC1IN1
—
—
IOC
CLKIN
RC0
10
9
AN4
—
C2IN+
—
—
—
CLC2OUT
—
SCL
SCK
—
—
RC1
9
8
AN5
—
C1IN1C2IN1-
—
—
NCOOUT(1)
—
PWM4
SDA
SDI
—
—
RC2
8
7
AN6
—
C1IN2C2IN2-
—
—
—
—
—
SDO(1)
—
—
RC3
7
6
AN7
—
C1IN3C2IN3-
—
—
—
CLC2IN0
PWM2
SS(1)
—
—
RC4
6
5
—
—
C2OUT
—
CWGB
—
CLC2IN1
—
—
—
—
RC5
5
4
—
—
—
—
CWGA
—
CLC1OUT(2)
PWM1
—
—
—
VDD
1
16
—
—
—
—
—
—
—
—
—
—
VDD
VSS
14
13
—
—
—
—
—
—
—
—
—
—
VSS
Note 1:
2:
Basic
14-Pin PDIP/SOIC/TSSOP
14-PIN ALLOCATION TABLE (PIC16(L)F1503)
I/O
TABLE 3:
Default location for peripheral pin function. Alternate location can be selected using the APFCON register.
Alternate location for peripheral pin function selected by the APFCON register.
2011 Microchip Technology Inc.
Advance Information
DS41454C-page 5
PIC12(L)F1501/PIC16(L)F150X
20-Pin QFN
ADC
Reference
Timer
CWG
NCO
CLC
PWM
Interrupt
RA0
19
16
AN0
—
—
—
—
—
—
IOC
ICSPDAT
RA1
18
15
AN1
VREF+
—
—
—
—
—
IOC
ICSPCLK
RA2
17
14
AN2
—
T0CKI
CWGFLT
—
CLC1OUT(1)
PWM3
INT
IOC
—
RA3
4
1
—
—
—
—
—
CLC1IN0
—
IOC
MCLR
VPP
RA4
3
20
AN3
—
T1G
—
—
—
—
IOC
CLKOUT
RA5
2
19
—
—
T1CKI
—
NCOCLK
—
—
IOC
CLKIN
RB4
13
10
AN10
—
—
—
—
—
—
IOC
—
RB5
12
9
AN11
—
—
—
—
—
—
IOC
—
RB6
11
8
—
—
—
—
—
—
—
IOC
—
RB7
10
7
—
—
—
—
—
—
—
IOC
—
RC0
16
13
AN4
—
—
—
—
CLC2OUT
—
—
—
RC1
15
12
AN5
—
—
—
NCOOUT(1)
—
PWM4
—
—
RC2
14
11
AN6
—
—
—
—
—
—
—
—
RC3
7
4
AN7
—
—
—
—
CLC2IN0
PWM2
—
—
RC4
6
3
—
—
—
CWGB
—
CLC2IN1
—
—
—
RC5
5
2
—
—
—
CWGA
—
CLC1OUT(2)
PWM1
—
—
RC6
8
5
AN8
—
—
—
NCOOUT(2)
—
—
—
—
RC7
9
6
AN9
—
—
—
CLC1IN1
—
—
—
Basic
20-Pin PDIP/SOIC/SSOP
20-PIN ALLOCATION TABLE (PIC16(L)F1507)
I/O
TABLE 4:
VDD
1
18
—
—
—
—
—
—
—
—
VDD
VSS
20
17
—
—
—
—
—
—
—
—
VSS
Note 1: Default location for peripheral pin function. Alternate location can be selected using the APFCON register.
2: Alternate location for peripheral pin function selected by the APFCON register.
DS41454C-page 6
Advance Information
2011 Microchip Technology Inc.
PIC12(L)F1501/PIC16(L)F150X
20-Pin QFN
ADC
Reference
Comparator
Timer
CWG
NCO
CLC
PWM
EUSART
MSSP
Interrupt
RA0
19
16
AN0
DACOUT1
C1IN+
—
—
—
—
—
—
—
IOC
ICSPDAT
ICDDAT
RA1
18
15
AN1
VREF+
C1IN0C2IN0-
—
—
—
CLC4IN1
—
—
—
IOC
ICSPCLK
ICDCLK
RA2
17
14
AN2
DACOUT2
C1OUT
T0CKI
CWGFLT
—
—
—
INT
IOC
—
RA3
4
1
—
—
—
T1G(2)
—
—
CLC1IN0
—
—
SS(2)
IOC
MCLR
VPP
RA4
3
20
AN3
—
—
T1OSCO
T1G(1)
—
—
—
—
—
—
IOC
OSC2
CLKOUT
RA5
2
19
—
—
—
T1OSCI
T1CKI
—
NCOCLK
—
—
—
—
IOC
OSC1
CLKIN
RB4
13
10
AN10
—
—
—
—
—
CLC3IN0
—
—
SDA
SDI
IOC
—
RB5
12
9
AN11
—
—
—
—
—
CLC4IN0
—
RX
DX
—
IOC
—
RB6
11
8
—
—
—
—
—
—
—
—
—
SCL
SCK
IOC
—
RB7
10
7
—
—
—
—
—
—
CLC3OUT
—
TX
CK
—
IOC
—
RC0
16
13
AN4
—
C2IN+
—
—
—
CLC2OUT
—
—
—
—
—
RC1
15
12
AN5
—
C1IN1C2IN1-
—
—
NCOOUT(1)
—
PWM4
—
—
—
—
RC2
14
11
AN6
—
C1IN2C2IN2-
—
—
—
—
—
—
—
—
—
RC3
7
4
AN7
—
C1IN3C2IN3-
—
—
—
CLC2IN0
PWM2
—
—
—
—
RC4
6
3
—
—
C2OUT
—
CWGB
—
CLC4OUT
CLC2IN1
—
—
—
—
—
RC5
5
2
—
—
—
—
CWGA
—
—
—
—
—
RC6
8
5
AN8
—
—
—
—
NCOOUT(2)
CLC3IN1
—
—
SS(1)
—
—
RC7
9
6
AN9
—
—
—
—
—
CLC1IN1
—
—
SDO
—
—
VDD
1
18
—
—
—
—
—
—
—
—
—
—
—
VDD
VSS
20
17
—
—
—
—
—
—
—
—
—
—
—
VSS
Note 1:
2:
CLC1OUT(1) PWM3
CLC1OUT(2) PWM1
Basic
20-Pin PDIP/SOIC/SSOP
20-PIN ALLOCATION TABLE (PIC16(L)F1508/9)
I/O
TABLE 5:
Default location for peripheral pin function. Alternate location can be selected using the APFCON register.
Alternate location for peripheral pin function selected by the APFCON register.
2011 Microchip Technology Inc.
Advance Information
DS41454C-page 7
PIC12(L)F1501/PIC16(L)F150X
NOTES:
DS41454C-page 8
Advance Information
2011 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
•
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,
PIC32 logo, rfPIC and UNI/O are registered trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, chipKIT,
chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,
dsPICworks, dsSPEAK, ECAN, ECONOMONITOR,
FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP,
Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB,
MPLINK, mTouch, Omniscient Code Generation, PICC,
PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE,
rfLAB, Select Mode, Total Endurance, TSHARC,
UniWinDriver, WiperLock and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2011, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-61341-392-0
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
2011 Microchip Technology Inc.
Advance Information
DS41454C-page 9
Worldwide Sales and Service
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
China - Hangzhou
Tel: 86-571-2819-3180
Fax: 86-571-2819-3189
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Taiwan - Hsin Chu
Tel: 886-3-6578-300
Fax: 886-3-6578-370
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Fax: 886-7-330-9305
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
DS41454C-page 10
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Advance Information
05/02/11
2011 Microchip Technology Inc.