PIC16LF1828-I/SS

PIC12F1822/16F182X 8/14/20-Pin 8-Bit Flash Microcontroller Product Brief High-Performance RISC CPU: Peripheral Features: • Only 49 Instructions to learn • Operating Speed: - DC – 32 MHz clock input - DC – 125 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory • Up to 17 I/O Pins and 1 Input-only Pin: - High current sink/source for LED drivers - Individually programmable interrupt-onchange pins - Individually programmable weak pull-ups • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Dedicated low-power 32 kHz oscillator driver • Up to three Timer2 modules (Timer2,4,6): 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Up to two Enhanced Capture, Compare, PWM modules (ECCP): - Software selectable time-bases - Auto-shutdown and auto-restart - PWM steering • Up to two Capture, Compare, PWM modules (CCP): - Software selectable time-bases • Up to two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with: - 7-bit address masking - SMBus/PMBusTM compatibility • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART): - RS-232, RS-485 and LIN compatible - Auto-Baud Detect - Auto-wake-up on start • SR Latch (Integrated 555 Timer): - Multiple Set/Reset input options • Analog-to-Digital Converter (ADC): - 10-bit resolution - Up to 12 channels • Up to 2 Comparators: - Rail-to-rail inputs - Power mode control - Software controllable hysteresis • Voltage Reference module: - Fixed voltage reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection • Capacitive Touch oscillator module: - Up to 12 channels • Data Signal Modulator: - Select modulator and carrier sources from various module outputs. Special Microcontroller Features: • Precision Internal Oscillator: - Factory calibrated to ±1%, typical - Software selectable frequency range from 32 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • External Oscillator Block with: - 4 crystal/resonator modes up to 32 MHz using 4xPLL - 3 external clock modes up to 32 MHz • 4x Phase Locked Loop (PLL) • Fail-Safe Clock Monitor • Two-Speed Start-up • Power-Saving Sleep mode • Power-on Reset (POR) • Power-up Timer (PWRT) • Oscillator Start-Up Timer (OST) • Brown-out Reset (BOR) with Selectable Trip Point • Extended Watchdog Timer (WDT) • In-Circuit Serial Programming™ (ICSP™) via two pins • In-Circuit Debug (ICD) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Operating Voltage Range: - 1.8V to 3.6V (PIC1XLF182X) - 1.8V to 5.5V (PIC1XF182X) • Programmable Code Protection • Self-Programmable under Software Control Low-Power Features: • Standby Current (PIC1XLF182X): - 30 nA @ 1.8V, typical • Operating Current (PIC1XLF182X): - 75 A @ 1 MHz, 1.8V, typical • Low-Power Watchdog Timer Current (PIC1XLF182X): - 500 nA @ 1.8V, typical  2009 Microchip Technology Inc. Advance Information DS41406B-page 1 PIC12F1822/16F182X TABLE 1: Device PIC12F1822/16F182X AND PIC12LF1822/16LF1823 FAMILY TYPES Program Data Timers Memory SRAM 10-bit A/D ECCP/ Cap Touch EEPROM I/Os 8/16-bit EUSART MSSP Flash (bytes) (ch) CCP Channels (bytes) (words) PIC12F1822 2048 256 128 6 4 2/1 1 1 1/0 4 PIC12LF1822 2048 256 128 6 4 2/1 1 1 1/0 4 PIC16F1823 2048 256 128 12 8 2/1 1 1 1/0 8 PIC16LF1823 2048 256 128 12 8 2/1 1 1 1/0 8 PIC16F1824 4096 256 256 12 8 4/1 1 1 2/2 8 PIC16LF1824 4096 256 256 12 8 4/1 1 1 2/2 8 PIC16F1825 8192 256 1024 12 8 4/1 1 1 2/2 8 PIC16LF1825 8192 256 1024 12 8 4/1 1 1 2/2 8 PIC16F1828 4096 256 256 18 12 4/1 1 1 2/2 12 PIC16LF1828 4096 256 256 18 12 4/1 1 1 2/2 12 PIC16F1829 8192 256 1024 18 12 4/1 1 2 2/2 12 PIC16LF1829 8192 256 1024 18 12 4/1 1 2 2/2 12 DS41406B-page 2 Advance Information  2009 Microchip Technology Inc. PIC12F1822/16F182X Note: Pin details are subject to change. FIGURE 1: 8-PIN DIAGRAM FOR PIC12F1822/LF1822 VDD RA5 1 RA4 3 4 2 RA3 PIC12F1822 PIC12LF1822 PDIP, SOIC, DFN 8 VSS 7 RA0 6 RA1 5 RA2 Note: See Table 2 for location of all peripheral functions. Cap Sense Comparator SR Latch Timers CCP EUSART MSSP Interrupt Modulator Pull-up Basic 7 AN0 DACOUT CPS0 C1IN+ — — P1B(1) TX(1) CK(1) SDO(1) SS(1) IOC MDOUT Y ICSPDAT/ ICDDAT RA1 6 AN1 VREF CPS1 C1IN0- SRI — — RX(1) DT(1) SCL SCK IOC MDMIN Y ICSPCLK/ ICDCLK RA2 5 AN2 — CPS2 C1OUT SRQ T0CKI CCP1(1) P1A(1) FLT0 — SDA SDI INT/ IOC MDCIN1 Y — RA3 4 — — — — — T1G(1) — — SS(1) IOC — Y MCLR VPP ICDMCLR RA4 3 AN3 — CPS3 C1IN1- — T1G(1) T1OSO P1B(1) TX(1) CK(1) SDO(1) IOC MDCIN2 Y OSC2 CLKOUT CLKR RA5 2 — — — — SRNQ T1CKI T1OSI CCP1(1) P1A(1) RX(1) DT(1) — IOC — Y OSC1 CLKIN Reference RA0 A/D 8-Pin PDIP/SOIC/DFN 8-PIN ALLOCATION TABLE (PIC12F1822/LF1822) I/O TABLE 2: VDD 1 — — — — — — — — — — — — VDD Vss 8 — — — — — — — — — — — — VSS Note 1: Pin functions can be assigned to one of two pin locations via software.  2009 Microchip Technology Inc. Advance Information DS41406B-page 3 PIC12F1822/16F182X FIGURE 2: 14-PIN DIAGRAM FOR PIC16F/LF1823/1824/1825 1 RA4 RA3 3 4 RC5 5 RC4 6 RC3 7 2 PIC16F1823/1824/1825 VDD RA5 PIC16LF1823/1824/1825 PDIP, SOIC, TSSOP 13 VSS RA0 12 RA1 11 RA2 10 RC0 9 RC1 8 RC2 14 Note: See Table 3 for location of all peripheral functions. FIGURE 3: 16-PIN DIAGRAM FOR PIC16F/LF1823/1824/1825 NC VSS NC VDD QFN 16 15 14 13 RA0 3 RA2 RC5 4 9 RC0 5 6 7 8 RC1 RA3/MCLR/VPP RC2 RA1 10 RC3 12 RA4 PIC16F1823/1824/1825 2PIC16LF1823/1824/182511 RC4 1 RA5 Note: See Table 3 for location of all peripheral functions. DS41406B-page 4 Advance Information  2009 Microchip Technology Inc. PIC12F1822/16F182X 14-Pin PDIP/SOIC/TSSOP 16-Pin QFN A/D Reference Cap Sense Comparator SR Latch Timers CCP EUSART MSSP Interrupt Modulator Pull-up Basic 14-PIN AND 16-PIN ALLOCATION TABLE (PIC16F/LF1823/1824/1825) I/O TABLE 3: RA0 13 7 AN0 DACOUT CPS0 C1IN+ — — — TX(1) CK(1) — IOC — Y ICSPDAT/ ICDDAT RA1 12 11 AN1 VREF CPS1 C12IN0- SRI — — RX(1) DT(1) — IOC — Y ICSPCLK ICDCLK RA2 11 10 AN2 — CPS2 C1OUT SRQ T0CKI CCP3(2) FLT0 — — INT/ IOC — Y — RA3 4 3 — — — — — T1G(1) — — SS(1) IOC — Y MCLR VPP RA4 3 2 AN3 — CPS3 — — T1G(1) T1OSO P2B(1,2) — SDO(1) IOC — Y OSC2 CLKOUT CLKR RA5 2 1 — — — — — T1CKI T1OSI CCP2(1,2) P2A(1,2) — — IOC — Y OSC1 CLKIN RC0 10 9 AN4 — CPS4 C2IN+ — — P1D(1,2) — SCL SCK — — Y — RC1 9 8 AN5 — CPS5 C12IN1- — — P1C(1,2) CCP4(2) — SDA SDI — — Y — RC2 8 7 AN6 — CPS6 C12IN2- — — P1D(1) P2B(1,2) — SDO(1) — MDCIN1 Y — RC3 7 6 AN7 — CPS7 C12IN3- — — P1C(1) CCP2(1,2) P2A(1,2) — SS(1) — MDMIN Y — RC4 6 5 — — — C2OUT SRNQ — P1B TX(1) CK(1) — — MDOUT Y — RC5 5 4 — — — — — — CCP1 P1A RX(1) DT(1) — — MDCIN2 Y — VDD 1 16 — — — — — — — — — — — — VDD VSS 14 13 — — — — — — — — — — — — VSS Note 1: 2: Pin functions can be assigned to one of two pin locations via software. Pin function only available on PIC16F1824 and PIC16F1825.  2009 Microchip Technology Inc. Advance Information DS41406B-page 5 PIC12F1822/16F182X FIGURE 4: 20-PIN DIAGRAM FOR PIC16F/LF1828/1829 PDIP, SOIC, SSOP 20 2 19 VSS RA0 RA4 3 4 18 RA1 RA3 17 RA2 RC5 5 16 RC0 RC4 6 RC3 7 RC6 8 PIC16F1828/1829 PIC16LF1828/1829 1 RA5 VDD 15 RC1 14 RC2 13 RB4 RC7 9 12 RB5 RB7 10 11 RB6 Note: See Table 4 for location of all peripheral functions. FIGURE 5: 20-PIN DIAGRAM FOR PIC16F/LF1828/1829 RA0 VSS VDD RA5 RA4 QFN 4x4 20 19 18 17 16 15 RA1 RA2 RC3 14 PIC16F1828/1829 13 3 PIC16LF1828/1829 12 4 RC6 11 RC2 5 8 RC0 RC1 9 10 RB4 7 RB5 6 RB6 RC4 2 RB7 RC5 1 RC7 RA3/MCLR/VPP Note: See Table 4 for location of all peripheral functions. DS41406B-page 6 Advance Information  2009 Microchip Technology Inc. PIC12F1822/16F182X Comparator SR Latch Timers CCP EUSART MSSP Interrupt Modulator Pull-up Basic AN0 VREFDACOUT CPS0 C1IN+ — — — — — IOC — Y ICSPDAT/ ICDDAT RA1 18 15 AN1 VREF+ CPS1 C12IN0- SRI — — — — IOC — Y ICSPCLK/ ICDCLK RA2 17 14 AN2 — CPS2 C1OUT SRQ T0CKI CCP3 FLT0 — — INT/ IOC — Y — RA3 4 1 — — — — T1G(1) — — — IOC — Y MCLR VPP RA4 3 20 AN3 — CPS3 — — T1G(1) T1OSO P2B(1) — SS2(1,2) IOC — Y OSC2 CLKOUT RA5 2 19 — — — — — T1CKI T1OSI CCP2(1) P2A(1) — SDO2(1,2) IOC — Y OSC1 CLKIN RB4 13 10 AN10 — CPS10 — — — — — SDA1 SDI1 IOC — Y — RB5 12 9 AN11 — CPS11 — — — — RX(1) DT(1) SDA2(2) SDI2(2) IOC — Y — RB6 11 8 — — — — — — — — SCL1 SCK1 IOC — Y — RB7 10 7 — — — — — — — TX(1) CK(1) SCL2(2) SCK2(2) IOC — Y — RC0 16 13 AN4 — CPS4 C2IN+ — — P1D(1) — SS2(1,2) — — Y — — SDO2(1,2) — — Y — A/D 19 16 20-Pin QFN RA0 I/O Cap Sense 20-PIN ALLOCATION TABLE (PIC16F/LF1828/1829) Reference 20-Pin PDIP/SOIC/SSOP TABLE 4: RC1 15 12 AN5 — CPS5 C12IN1- — — P1C(1) RC2 14 11 AN6 — CPS6 C12IN2- — — P1D(1) P2B(1) — — — MDCIN1 Y — RC3 7 4 AN7 — CPS7 C12IN3- — — P1C(1) CCP2(1) P2A(1) — — — MDMIN Y — RC4 6 3 — — — C2OUT SRNQ — P1B TX(1) CK(1) — — MDOUT Y — RC5 5 2 — — — — — — CCP1 P1A RX(1) DT(1) — — MDCIN2 Y — RC6 8 5 AN8 — CPS8 — — — CCP4 — SS — — Y — RC7 9 6 AN9 — CPS9 — — — — — SDO — — Y — VDD 1 18 — — — — — — — — — — — — VDD VSS 20 20 — — — — — — — — — — — — VSS Note 1: Pin functions can be assigned to one of two pin locations via software.  2009 Microchip Technology Inc. Advance Information DS41406B-page 7 PIC12F1822/16F182X NOTES: DS41406B-page 8 Advance Information  2009 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Octopus, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, PIC32 logo, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2009, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 978-1-60932-055-3 Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.  2009 Microchip Technology Inc. Advance Information DS41406B-page 9 WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4080 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Kokomo Kokomo, IN Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8528-2100 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 03/26/09 DS41406B-page 10 Advance Information  2009 Microchip Technology Inc.