PM8534B-FEI

Data Center Solutions PCI Express® Solutions Field-Proven, Interoperable and Standards-Compliant Portfolio www.microchip.com PCI Express® Solutions PCI Express® (PCIe) is a widely deployed bus interconnect interface that is commonly used in server platforms. Increasingly, it is also used as a storage and GPU interconnect solution. PCIe Gen3 supports 8 GT/s of throughput per PCIe lane and Gen4 supports 16 GT/s. Typical implementations utilize ×2, ×4, ×8 and ×16 lane width interconnect configurations—directly from the host root complex or through PCIe switches to endpoint PCIe devices. Microchip is a leader in PCIe, having introduced multiple industry firsts. Highlights include: • PCIe Gen3 SAS/SATA RAID controller • The industry’s highest-density and lowest-power Gen3 PCIe switches, Switchtec™ PSX and PFX • PCIe Gen3 NVMe Flash controller (Flashtec™), followed by a second-generation introduction of the industry’s fastest PCIe Gen3 NVMe SSD controllers • PCIe Gen3 redriver with EQNOX™ adaptive equalization • Flash-based FPGAs and SoCs used in CPLD functions with integrated PCIe endpoint implementations Microchip offers a flexible product portfolio to intelligently design your PCIe system for data center, communications, defense and industrial applications. Our industry-leading PCIe solutions include storage and fanout switches, NVMe controllers, NVRAM drives, redrivers and timing solutions and Flash-based FPGAs and SoCs. PCIe® Storage Server QSFP+ 10G Ethernet PHY w/ AES-256 MACSec and IEEE 1588 Network Processor SmartFusion®2 SoC FPGA Fans PCIe Connector Fan Control PCIe Fan/Power Management Sequencing Secure Boot SPI Switching Regulators SPI EEPROM Solid State Drive 2 Switching Regulators eFuse Flash Memory Flashtec™ NVMe Controller Clock Management PCIe VSC7112 PCIe Gen3 Redriver PCIe Switchtec™ PCIe Gen3 Storage Switch 12 V Backplane Network Interface Card CPU PCIe PCIe www.microchip.com PCI Express Solutions Advantages Switchtec PCIe Switches • Options from 24 to 96 lanes • Industry’s most flexible port bifurcation, from ×2 to ×16 lanes per port • Highest port and Non-Transparent Bridge (NTB) density, with up to 48 ports and 48 NTBs • Highest switch partition density • Industry’s first integrated programmable processor • Industry’s first integrated enclosure management solution • PFX-I supports industrial temperature ranges, –40°C (TA) to 105°C (TJ) Flashtec NVMe Controllers • World’s first and fastest enterprise PCIe NVMe controller, with up to 850K IOPS and up to 8 TB • Software-defined flash: flexible, programmable architecture optimized for cost, performance and endurance • Enterprise-class reliability, availability and serviceability with NVMe management features and industry’s only dual-port controller Signal Integrity • PCIe Gen 3.0 solutions supporting ×1 to ×8 lanes • Adaptive EQ and de-emphasis with up to 30 dB loss compensation • BOM integration and smaller package sizes save board cost and area • Low-power modes scale with speed and drive strength • High ease of use Timing Solutions • End-to-end offerings, including synthesis, rate conversion, attenuation and distribution • Ultra-low-jitter (160 fs) synthesizers and attenuators • Ultra-low additive jitter, cost-efficient buffers • Application specific with custom configuration—MiClockDesigner™ • Validated with the Agilent Time Domain PCI-SIG Compliance Software Suite Flashtec NVRAM Drives • Non-volatile DRAM with over 10 million IOPS, sub-microsecond latency • Industry-standard interfaces that are application-friendly for ease of integration • Zero-maintenance green backup • Unlimited endurance NVRAM • Small form factor for high-density rack solutions x16 40 x 2 SSD PCI Express Solutions 3 PCIe Signal Integrity and Timing Solutions PCIe Signal Integrity Improve weak or degraded signals with Switchtec PCIe signal integrity solutions. With industry-exclusive EQNOX™ adaptive equalization add Switchtec’s PCIe redrivers and crosspoint switches deliver excellent performance in a compact footprint with flexible lane configurations for Gen1/2/3 applications, including passthrough buffer, non-blocking matrix switching, replication of inputs to multiple outputs and multiplexing. Product Ports Max Rate Part Type Receiver Type Max Link Width VSC3340-01 40 × 40 6.5G Crosspoint Switch CTLE PCIe® 2.0 × 16 VSC3316 16 × 16 11.5G Crosspoint Switch CTLE PCIe 3.0 × 8 VSC3308 8×8 11.5G Crosspoint Switch CTLE PCIe 3.0 × 4 VSC7112 4, Dual 2 × 2 8.5G Redriver with mux/demux Adaptive CTLE PCIe 3.0 × 2 Clock Synthesis The miClockSynth™ family of high-performance, any-rate multiplier and frequency synthesizer devices simplifies board design by generating ultra-low-jitter clock signals from a single crystal or crystal oscillator while generating additional independent frequency families. Frequency Families Outputs Inputs Jitter Performance RMS Package (mm) ZL3025x 1 Up to 3 diff/6SE, 1 Hz–1035 MHz 10 M–1250 MHz 160 fs 5 × 5 QFN ZL3026x 4 Up to 10 diff/20SE, 1 Hz–1035 MHz 10 M–1250 MHz 170 fs 8 × 8 QFN Product Gen 1-4 PCIe Clock Generators Independent Output Freq. Families Inputs Crystal Input Freq. Range Xtal Oscillator or CMOS Input Freq. Range LowJitter APLLs Typical Jitter fs RMS Default Output Configurations Output Freq. Range Host Bus Supply Voltage Pkg Size (mm) ZL30281 1 1 XTAL 25M 25 M 1 160 4 25 M, 100 M SPI/I2C 3.3 + 1.8 5x5 ZL30282 2 2 XTAL 50M 50 M 1 160 8 25 M, 75 M 100 M SPI/I2C See note 8x8 Product 2.5V only, 3.3V only, 1.8V + 2.5V, 1.8V + 3.3V Clock Fanout Buffers Microchip’s high-performance buffers complement clock synthesis devices by providing additional fanout capabilities and minimal jitter combined with the industry’s best power supply noise rejection performance. This preserves signal integrity by adding ultra-low jitter and filtering noise from power supplies, resulting in better performance while simplifying engineering board design efforts. Input Outputs Output Frequency Additive Jitter RMS Package (mm) ZL40xxx 1, 2, and XO, any signal type 2, 4, 6, 8 LVPECL or LVDS 750 MHz