RN-1810-PICTAIL

RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide  2016 Microchip Technology Inc. DS50002471A Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated. Trademarks The Microchip name and logo, the Microchip logo, AnyRate, dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq, KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. ClockWorks, The Embedded Control Solutions Company, ETHERSYNCH, Hyper Speed Control, HyperLight Load, IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker, Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == DS50002471A-page 2 Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. GestIC is a registered trademarks of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2016, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. ISBN: 978-1-5224-0380-7  2016 Microchip Technology Inc. Object of Declaration: RN1810 PICtail™/PICtail Plus Daughter Board  2016 Microchip Technology Inc. DS50002471A-page 3 RN1810 PICtail™/PICtail Plus Daughter Board NOTES: DS50002471A-page 4  2016 Microchip Technology Inc. RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD USER’S GUIDE Table of Contents Preface ........................................................................................................................... 7 Chapter 1. Overview 1.1 Introduction ................................................................................................... 11 1.2 Features ....................................................................................................... 11 1.3 Board Configuration ..................................................................................... 11 Chapter 2. Getting Started 2.1 Overview ...................................................................................................... 13 2.2 Other Information ......................................................................................... 13 Appendix A. Board Schematic A.1 RN1810 PICtail™/PICtail Plus Daughter Board Schematic ......................... 15 Worldwide Sales and Service .................................................................................... 17  2016 Microchip Technology Inc. DS50002471A-page 5 RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide NOTE: DS50002471A-page 6  2016 Microchip Technology Inc. RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD USER’S GUIDE Preface NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our website (www.microchip.com) to obtain the latest documentation available. Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document. For the most up-to-date information on development tools, see the MPLAB® IDE online help. Select the Help menu, and then Topics to open a list of available online help files. INTRODUCTION This chapter contains general information that will be useful to know before using the RN1810 PICtail™/PICtail Plus Daughter Board. Items discussed in this chapter include: • • • • • • • Document Layout Conventions Used in this Guide Recommended Reading The Microchip Website Development Systems Customer Change Notification Service Customer Support Document Revision History DOCUMENT LAYOUT This document describes how the RN1810 PICtail/PICtail Plus Daughter Board allows the designer to evaluate and demonstrate the capabilities of the RN1810 module. The document is organized as follows: • Chapter 1. “Overview” – This chapter contains the RN1810 PICtail/PICtail Plus Daughter Board description. • Chapter 2. “Getting Started” - This chapter provides a quick overview of the RN1810 PICtail/PICtail Plus Daughter Board. • Appendix A. “Board Schematic” – This appendix provides the RN1810 PICtail/PICtail Plus Daughter Board schematic.  2016 Microchip Technology Inc. DS50002471A-page 7 RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Arial font: Italic characters Initial caps Quotes Underlined, italic text with right angle bracket Bold characters N‘Rnnnn Text in angle brackets < > Courier New font: Plain Courier New Represents Referenced books Emphasized text A window A dialog A menu selection A field name in a window or dialog A menu path MPLAB® IDE User’s Guide ...is the only compiler... the Output window the Settings dialog select Enable Programmer “Save project before build” A dialog button A tab A number in verilog format, where N is the total number of digits, R is the radix and n is a digit. A key on the keyboard Click OK Click the Power tab 4‘b0010, 2‘hF1 Italic Courier New Sample source code Filenames File paths Keywords Command-line options Bit values Constants A variable argument Square brackets [ ] Optional arguments Curly brackets and pipe character: { | } Ellipses... Choice of mutually exclusive arguments; an OR selection Replaces repeated text Represents code supplied by user DS50002471A-page 8 Examples File>Save Press , #define START autoexec.bat c:\mcc18\h _asm, _endasm, static -Opa+, -Opa0, 1 0xFF, ‘A’ file.o, where file can be any valid filename mcc18 [options] file [options] errorlevel {0|1} var_name [, var_name...] void main (void) { ... }  2016 Microchip Technology Inc. Preface RECOMMENDED READING This user's guide describes how to use RN1810 PICtail/PICtail Plus Daughter Board. Other useful documents are listed below. The following Microchip document(s) are recommended as supplemental reference resources. RN1810/RN1810E 2.4 GHz IEEE 802.11b/g/n Wireless Module Data Sheet (DS50002460A) This document provides the technical specifications for the RN1810/RN1810E modules and is available for download from the Microchip website (www.microchip.com) RN1810 WiFly Command Reference User’s Guide (DS50002467A) This document provides information for configuring the RN1810 module including a command reference, advanced features, and application examples. THE MICROCHIP WEBSITE Microchip provides online support via our website at www.microchip.com. This website is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the website contains the following information: • Product Support – Data sheets and errata, application notes and sample programs, design resources, user’s guides and hardware support documents, latest software releases and archived software • General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing • Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events; and listings of Microchip sales offices, distributors and factory representatives DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE Microchip’s customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip website at www.microchip.com, click on Customer The Development Systems product group categories are: • Compilers – The latest information on Microchip C compilers and other language tools • Emulators – The latest information on the Microchip MPLAB® REAL ICE™ in-circuit emulator • In-Circuit Debuggers – The latest information on the Microchip in-circuit debugger, MPLAB ICD 3 • MPLAB X IDE – The latest information on Microchip MPLAB X IDE, the Windows® Integrated Development Environment for development systems tools • Programmers – The latest information on Microchip programmers including the PICkit™ 3 development programmer  2016 Microchip Technology Inc. DS50002471A-page 9 RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: • • • • Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the website at: http://www.microchip.com/support. DOCUMENT REVISION HISTORY Revision A (March 2016) This is the initial release of this document. DS50002471A-page 10  2016 Microchip Technology Inc. RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD USER’S GUIDE Chapter 1. Overview 1.1 INTRODUCTION The RN1810 PICtail™/PICtail Plus Daughter Board is a demonstration board that showcases the Microchip RN1810 Certified WiFly module, a low-cost IEEE 802.11b/g/n Wi-Fi® Transceiver module. The high-speed UART interface and the I/O pins are available on the RN1810 module to configure, control, and transfer data. The RN1810 PICtail Plus Daughter Board has PICtail Plus and PICtail connectors to interface with a PIC® Microcontroller (MCU) on the development boards that support PICtail Plus or PICtail interface with the required pin mapping. The PICtail board also has an MCP2200 USB bridge to enable easy serial connection to a PC over USB. This document must be used in conjunction with the “RN1810 WiFly Command Reference User’s Guide” (DS50002467A). 1.2 FEATURES • • • • 1.3 Microchip RN1810 IEEE 802.11b/g/n Compliant Transceiver PICtail Plus Daughter Board or PICtail Daughter Board Connection Interfaces MCP2200 USB Bridge and connector for stand-alone UART terminal operation Status LEDs, Reset button, and Function button BOARD CONFIGURATION Jumper positions on the RN1810 PICtail™/PICtail Plus Daughter Board are as follows: • Jumper JP5 must be shorted • Jumpers JP2 and JP3 must be open • Jumper JP1 must be configured as follows: - must be shorted when the PICtail is operating stand-alone (only powered via USB cable) - must be open when the PICtail is connected to the Microchip development board Table 1-1 provides the list of LEDs on the daughter board with its corresponding color description and pin connection. TABLE 1-1: RN1810 LED DESCRIPTION LED Color Description PWR Green Turned on when the RN1810 is powered TX Green Connected to UART0_TX RX Green Connected to UART0_RX D1 Yellow Connected to IP_STATUS I/O D2 Blue Connected to TCP_STATUS I/O D3 Green Connected to CMD_STATUS I/O D4 Red Connected to MISC_STATUS I/O  2016 Microchip Technology Inc. DS50002471A-page 11 RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide Table 1-2 provides a brief description of the buttons on the board. TABLE 1-2: RN1810 BUTTONS Button(1) Description Reset Performs a Module Reset. Function Connected to FUNC_CONFIG pin which is low by default. Pressing the button sets the FUNC_CONFIG pin high. Note 1: Refer to the “RN1810 WiFly Command Reference User’s Guide” (DS50002467A) for a detailed description of the I/O pins connected to the module’s LEDs and buttons. Figure 1-1 shows the RN1810 PICtail™/PICtail Plus Daughter Board with the Reset button on the top left side and the Function button below it. On the right-hand side, lined up vertically, are the four LEDs. FIGURE 1-1: RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD Reset button Jumpers (JP1 & JP5) Function button Jumpers LEDs (D1-D4) (JP3 & JP2) DS50002471A-page 12  2016 Microchip Technology Inc. RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD USER’S GUIDE Chapter 2. Getting Started 2.1 OVERVIEW The RN1810 module on the RN1810 PICtail/PICtail Plus Daughter Board exposes a high speed UART interface which can be used to issue ASCII commands to configure and control the RN1810 module. For more information on the RN1810 commands, configuration and examples, refer to the “RN1810 WiFly Command Reference User’s Guide” (DS50002467A). While in PICtail mode, the board can be plugged into any standard Microchip development board that supports the PICtail Plus or PICtail connection interface. Note: Ensure that the PICtail connector pin-out on the host MCU development platform supports the pin-out on the PICtail interface on the RN1810 PICtail/PICtail Plus Daughter Board. The firmware running on the Microchip 8/16/32-bit PIC MCU can be used to interface over UART and I/O ports with the RN1810 on the PICtail board. Refer to the Section 2.2 “Other Information” for information about downloading PIC workspaces for PICtail mode. When the RN1810 PICtail/PICtail Plus Daughter Board is first connected to a PC via the USB cable, the PC automatically downloads the MCP2200 USB driver. Alternatively, the MCP2200 driver can be downloaded and installed directly from the Microchip web page at http://www.microchip.com/wwwproducts/en/en546923. While in MCP2200 UART Bridge mode, the board can be connected via a Micro-USB cable to a PC that supports serial COM ports where the board immediately enumerates a serial COM port. A terminal emulator application on the PC can be used to open the COM port and issue commands when the RN1810 is in Command mode, or to transfer data when the RN1810 is in Data mode. Typing $$$ while in Data mode transitions the module to Command mode. There is a 250 ms guard band duration to enter Command mode. The Command mode is entered only if each dollar sign character ($)is entered within 250 ms interval, and no other characters are received by the module 250 ms before the first and after the last $. Application examples can be found in Chapter 4, Application Examples of the “RN1810 WiFly Command Reference User’s Guide” (DS50002467A). 2.2 OTHER INFORMATION To obtain the most recent and complete RN1810 Data Sheet, User's Guide and code examples, visit the Microchip website: www.microchip.com/RN1810.  2016 Microchip Technology Inc. DS50002471A-page 13 RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide NOTES: DS50002471A-page 14  2016 Microchip Technology Inc. RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD USER’S GUIDE Appendix A. Board Schematic A.1 RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD SCHEMATIC Figure A-1 shows the RN1810 PICtail/PICtail Plus Daughter Board schematics.  2016 Microchip Technology Inc. DS50002471A-page 15 RN1810 PICtail™/PICtail PLUS DAUGHTER BOARD SCHEMATIC 1 RB2/SS1/AN2 RF2/U1RX_E 2 3 RF6/SCK1 RF3/U1TX_E 4 RF7/SDI1_E RG2/SCL1 6 7 RF8/SDO1_E RG3/SDA1 8 9 GND STATUS_RDY RB3/AN3 RB4/AN4 14 GND 16 RD14/U1CTS_E RE8/INT1 18 CMD_CTRL 20 UART0_CTS 3.3V 22 3.3V 23 5V 5V 24 25 9V 9V 26 RG0 RF0 28 RG1 RF1 30 STATUS_RDY 6 UART0_TX D1 R21 YELLOW 220R 5% 0402 GND VDD_3V3 IP_STATUS IP_STATUS 8 UART0_CTS UART0_RTS JP2 WAKEUP PICTAIL PLUS 30 PIN R22 BLUE 330R 5% 0402 SLEEP FUNC_CONFIG RESET RESET R9 VDD_3V3 0402 CMD_CTRL 100k UART0_RX/MODE0 5% TCP_CTRL CMD_CTRL J3 IP_STATUS TCP_STATUS UART0_RTS MISC_STATUS VDD_3V3 R17 UART0_RTS R18 3k 0402 1% GND 3k 0402 1% R25 SW2 1k 0402 1% TACT SPST 2 D+ D- 18 15 C13 GND Island R12 VDD_3V3 1M 0402 5% RST R15 RX 220R 0402 5% 1 0402 R24 RED 220R 5% 0402 VDD_3V3 GREEN R14 4.7k 0402 5% GND Tab 4.7uF 6.3V 0402 Vout GND C10 1 2 TC1262-3.3VDBTR Vin 4 1 C12 0.47uF 6.3V 0402 U1_VOUT 3 C16 0.1uF 16V 0402 GND C11 4.7uF 6.3V 0402 R13 220R 0402 5% PWR GREEN GND REG_3V3 NC 2 TEST 17 TEST 18 GND 37 GND 36 GND 34 GND 27 GND 24 G1 GND 16 G2 GND 3 G4 GND 1 G3 GND GND 37 2 TEST GND 36 3 GND VDD 35 4 VDD GND 34 5 CMD_STATUS NC 33 6 STATUS_RDY NC 32 7 UART0_TX NC 31 8 IP_STATUS NC 30 NC 29 RN1810 MODULE REFERENCE 9 UART0_CTS 10 UART0_RTS 11 NC 12 TCP_STATUS 13 SLEEP 14 FUNC_CONFIG 12Mhz C18 GND 18pF 50V 0402 GND GND C6 C7 Shunt 2.54mm 1x2 0.1uF 2.2uF 10V 0.1uF 10V 0402 NC 28 GND 27 MISC_STATUS 26 WAKEUP 25 GND 24 Do Not Populate J2 USB_DN ART2 HDR-2.54 Male 1x4 GND 3 X1 C17 18pF 50V 0402 VDD_3V3 C5 +5V TEST 1 M2 JP1 U1 USB2.0 MICRO-AB FEMALE 0.1uF 16V 0402 NC 15 VDD_3V3 +5V 2 P1 0.1uF 16V 0402 GND 0  2016 Microchip Technology Inc. SGND3 C15 NC 33 MODE1 GP7/TxLED GREEN 1 D- NC TCP_CTRL VUSB 220R 0402 5% GND GND MISC_STATUS 32 10V 0402 USB_DP UART0_RX/MODE0 6 GP3 3 TX GND D+ WAKEUP 23 7 TX GP6/RxLED R16 20 D- RTS GP0/SSPND OSC2 4 OSC1 GP5 VDD GP1/USB-CFG 19 0.1uF 16V 0402 5 4 3 2 1 MODE1 25 CMD_CTRL MCP22_RTS MCP22_TXD 8 MCP22_CTS MCP22_RXD 12 14 C14 9 10 5 VSS GP4 13 GND GND ID D+ DVBUS TCP_CTRL 23 R27 D4 GND U2 MCP2200 QFN-20 GP2 D+ 10000pF 16V 0402 1000pF 25V 0402 UART0_RX/MODE0 22 22 3k 0402 1% 11 17 C3 RX RESET 16 100k 0402 5% CTS R4 C9 CMD_CTRL 21 31 0402 C4 GND 20 NC VDD_3V3 RESET RESET NC C19 VDD 0402 M1 GND HDR-2.54 Male 1x2 GND FUNC_CONFIG 19 30 DNP VDD 4 GND JP3 Do Not Populate TACT SPST 14 DNP VDD_3V3 VDD SLEEP R26 FUNC_CONFIG 35 TCP_STATUS 13 R20 3k 0402 1% RESET NC VDD GND R19 1 2 UART0_RTS 1 2 HDR-2.54 Male 1x2 JP5-1 2.2uF UART0_CTS 29 0.1uF 16V 0402 UART0_CTS UART0_RX/MODE0 IP_STATUS 11 28 0402 VDD_3V3 UART0_TX JP5 0.1uF GND 15 10V 10 MISC_STATUS26 VDD_3V3 VDD STATUS_RDY RESET TCP_CTRL 10k 0402 5% CMD_STATUS STATUS_RDY WAKEUP CMD_STATUS C2 2.2uF VDD RN1810 21 FUNC_CONFIG 2 4 6 8 10 12 14 16 18 20 22 24 26 28 UART0_RX/MODE0 SLEEP RA5 RA4 RA3 RC5 RC4 RC3 RA0 RA1 RA2 RC0 RC1 RC2 V_VAR GND UART0_CTS UART0_RX/MODE0 RE2 RE3 RA7/OSC1 RA6/OSC2 RC7 RC6 RB7 RB6 RB5 RB4 RB3 RB2 RB1 RB0 UART0_TX 1 3 5 7 9 11 13 15 17 19 21 23 25 27 UART0_TX UART0_RTS RESET GND R10 VDD_3V3 WAKEUP 9 TCP_STATUS 12 D2 GND RESET 7 10V 0402 C1 0402 CMD_STATUS 5 TEST 29 GND 20 27 GND 10V TEST 21 220R 0402 5% CMD_STATUS RD15/U1RTS_E RE9/INT2 19 VDD_3V3 GND 12 GND TCP_STATUS 17 UART0_RTS 10 RB1/AN1 R23 GREEN 19 15 GND RB0/AN0 D3 GND GND MISC_STATUS 13 UART0_TX UART0_RX/MODE0 18 11 5% 220R VDD IP_STATUS R1 0R 0402 17 TCP_CTRL 0402 R2 16 5 1 2 SLEEP FUNC_CONFIG 1 2 3 4 J1 GND RN1810 PICtail™/PICtail Plus Daughter Board User’s Guide DS50002471A-page 16 FIGURE A-1: Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Germany - Dusseldorf Tel: 49-2129-3766400 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Hong Kong Tel: 852-2943-5100 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 Austin, TX Tel: 512-257-3370 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Canada - Toronto Tel: 905-673-0699 Fax: 905-673-6509 China - Dongguan Tel: 86-769-8702-9880 China - Hangzhou Tel: 86-571-8792-8115 Fax: 86-571-8792-8116 India - Pune Tel: 91-20-3019-1500 Japan - Osaka Tel: 81-6-6152-7160 Fax: 81-6-6152-9310 Japan - Tokyo Tel: 81-3-6880- 3770 Fax: 81-3-6880-3771 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Kaohsiung Tel: 886-7-213-7828 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Germany - Karlsruhe Tel: 49-721-625370 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy - Venice Tel: 39-049-7625286 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Poland - Warsaw Tel: 48-22-3325737 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 07/14/15 DS50002471A-page 17  2016 Microchip Technology Inc.