SY100E416JI

■ Differential D and Q ■ Extended 100E VEE range of –4.2V to –5.5V The SY10/100E416 are 5-bit differential line receiving devices. The 2.0GHz of bandwidth provided by the high frequency outputs make the devices ideal for buffering of very high speed oscillators. A VBB pin is available to AC couple an input signal to the devices. The design incorporates two stages of gain internal to the devices, making them an excellent choice for use in high bandwidth amplifier applications. VBB output for single-ended use 600ps max. propagation delay High frequency outputs 2 stages of gain Internal 75KΩ input pull-down resistors Fully compatible with Motorola 10E/100E416 Available in 28-pin PLCC package PIN NAMES BLOCK DIAGRAM Pin D0 D0 SY100E416 DESCRIPTION FEATURES ■ ■ ■ ■ ■ ■ ■ SY10E416 SY100E416 SY10E416 QUINT DIFFERENTIAL LINE RECEIVER Micrel, Inc. Q0 Q0 D1 D0 Q1 Q1 D2 D2 Q2 Q2 D3 D3 Q3 Q3 D4 D4 Q4 Q4 Function D[0:4], D[0:4] Differential Data Inputs Q[0:4], Q[0:4] Differential Data Outputs VCCO VCC to Output VBB M9999-032206 hbwhelp@micrel.com or (408) 955-1690 Rev.: F 1 Amendment: /0 Issue Date: March 2006 SY10E416 SY100E416 Micrel, Inc. Ordering Information(1) Q4 Q4 VCCO D3 D4 D4 VCCO PACKAGE/ORDERING INFORMATION 25 24 23 22 21 20 19 Part Number Package Type Operating Range Package Marking Lead Finish J28-1 Industrial SY10E416JI Sn-Pb D3 26 18 Q3 SY10E416JI D2 27 17 Q3 D2 SY10E416JITR(2) J28-1 Industrial SY10E416JI Sn-Pb 28 16 VCC VEE VBB 1 15 Q2 SY100E416JI J28-1 Industrial SY100E416JI Sn-Pb 2 J28-1 Industrial SY100E416JI Sn-Pb D0 3 13 Q2 VCCO SY100E416JITR(2) SY10E416JC J28-1 Commercial SY10E416JC Sn-Pb D0 4 12 Q1 SY10E416JCTR(2) J28-1 Commercial SY10E416JC Sn-Pb SY100E416JC J28-1 Commercial SY100E416JC Sn-Pb SY100E416JCTR(2) J28-1 Commercial SY100E416JC Sn-Pb SY10E416JY(3) J28-1 Industiral SY10E416JY with Pb-Free bar-line indicator Matte-Sn SY10E416JYTR(2, 3) J28-1 Industrial SY10E416JY with Pb-Free bar-line indicator Matte-Sn SY100E416JY(3) J28-1 Industrial SY100E416JY with Pb-Free bar-line indicator Matte-Sn SY100E416JYTR(2, 3) J28-1 Industrial SY100E416JY with Pb-Free bar-line indicator Matte-Sn TOP VIEW PLCC J28-1 8 9 10 11 VCCO Q1 7 VCCO Q0 Q0 D1 6 D1 5 14 28-Pin PLCC (J28-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032206 hbwhelp@micrel.com or (408) 955-1690 2 SY10E416 SY100E416 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0°C Symbol VBB TA = +25°C Min. Typ. Output Reference Voltage 10E 100E –1.38 –1.38 — — — — 150 — — 150 — — 135 135 162 162 — — 135 135 50 — — 50 –1.5 — 0 –1.5 IIH Input HIGH Current IEE Power Supply Current 10E 100E VPP (DC) Input Sensitivity VCMR Common Mode Range Max. Min. –1.27 –1.35 –1.26 –1.38 Typ. TA = +85°C Parameter — — Max. Min. –1.25 –1.31 –1.26 –1.38 Typ. Max. Unit Condition V — µA — mA — — — –1.19 –1.26 — — 150 162 162 — — 135 155 162 186 — — 50 — — mV 1 — 0 –1.5 — 0 V 2 Notes: 1. Differential input voltage required to obtain a full ECL swing on the outputs. 2. VCMR is referenced to the most positive side of the differential input signal. Normal operation is obtained when the input signals are within the VCMR range and the input swing is greater than VPP (min.) and