SY100S364JZ

NOT RECOMMENDED FOR NEW DESIGNS Micrel, Inc. 16-INPUT MULTIPLEXER FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SY100S364 SY100S364 DESCRIPTION The SY100S364 is a 16-input multiplexer designed for use in high-performance ECL systems. The four Data Select inputs (S0, S1, S2, S3) determine the bit from the 16 inputs (In) that will be passed on to the output as shown in the Truth Table. The output data polarity is the same as the input. The inputs on the device have 75kΩ pull-down resistors. Max. propagation delay of 1300ps IEE min. of –63mA Industry standard 100K ECL levels Extended supply voltage option: VEE = –4.2V to –5.5V Voltage and temperature compensation for improved noise immunity Internal 75kΩ input pull-down resistors 70% faster than Fairchild 40% lower power than Fairchild Function and pinout compatible with Fairchild F100K Available in 28-pin PLCC packages BLOCK DIAGRAM I15 I14 I13 I12 I11 I10 I9 I8 S3 Z I7 I6 S2 I5 I4 S1 I3 I2 S0 I1 I0 M9999-042307 hbwhelp@micrel.com or (408) 955-1690 Rev.: I 1 Amendment: /0 Issue Date: April 2007 SY100S364 Micrel, Inc. I10 I9 Ordering Information I11 I13 I12 VEES I14 PACKAGE/ORDERING INFORMATION Part Number 11 10 9 8 7 6 5 I15 S0 12 13 VEE VEES S1 14 15 16 S2 17 18 S3 4 3 Top View PLCC J28-1 I8 Z VCCA 2 1 28 VCC VCC 27 26 I7 SY100S364JZ (2) SY100S364JZTR(1, 2) Package Marking Lead Finish J28-1 Commercial SY100S364JC Sn-Pb J28-1 Commercial SY100S364JC Sn-Pb J28-1 Commercial SY100S364JZ with Pb-Free bar-line indicator Matte-Sn J28-1 Commercial SY100S364JZ with Pb-Free bar-line indicator Matte-Sn Notes: 1. Tape and Reel. 2. Pb-Free package is recommended for new designs. I3 I4 I5 VEES I1 I2 SY100S364JCTR (1) Operating Range I6 19 20 21 22 23 24 25 I0 SY100S364JC Package Type 28-Pin PLCC (J28-1) TRUTH TABLE(1) PIN NAMES Pin Select Inputs Function Output I0 – I15 Data Inputs S0 S1 S2 S3 Z S0 – S3 Select Inputs Z Data Output VEES VEE Substrate L H L H L L H H L L L L L L L L I0 I1 I2 I3 VCCA VCCO for ECL Outputs L H L H L L H H H H H H L L L L I4 I5 I6 I7 L H L H L L H H L L L L H H H H I8 I9 I10 I11 L H L H L L H H H H H H H H H H I12 I13 I14 I15 NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level M9999-042307 hbwhelp@micrel.com or (408) 955-1690 2 SY100S364 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND Symbol IIH IEE Parameter Min. Typ. Max. — — — — — — 200 200 200 –63 –45 –30 Input HIGH Current In S0, S1 S2, S3 Power Supply Current Unit Condition µA VIN = VIH (Max.) mA Inputs Open AC ELECTRICAL CHARACTERISTICS VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND TA = 0°C Symbol Parameter TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Unit tPLH tPHL Propagation Delay I0 – I15 to Output 400 1300 400 1300 400 1300 ps tPLH tPHL Propagation Delay S0, S1 to Output 400 1800 400 1800 400 1800 ps tPLH tPHL Propagation Delay S2, S3 to Output 400 1600 400 1600 400 1600 ps tTLH tTHL Transition Time 20% to 80%, 80% to 20% 300 900 300 900 300 900 ps TIMING DIAGRAM 0.7 ± 0.1 ns 0.7 ± 0.1 ns INPUT –0.95V 80% 50% 20% –1.69V tPHL tPLH 80% 50% 20% OUTPUT tTLH tTHL Propagation Delay and Transition Times Note: VEE = –4.2V to –5.5V unless otherwise specified; VCC = VCCA = GND M9999-042307 hbwhelp@micrel.com or (408) 955-1690 3 Condition SY100S364 Micrel, Inc. 28-PIN PLCC (J28-1) Rev. A MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-042307 hbwhelp@micrel.com or (408) 955-1690 4