SY10E164JZTR

NOT RECOMMENDED FOR NEW DESIGNS SY10E164 SY100E164 SY10E164 16:1 MULTIPLEXER Micrel, Inc. SY100E164 DESCRIPTION FEATURES ■ 850ps Data Input to Output ■ Extended 100E VEE range of –4.2V to –5.5V The SY10/100E164 are 16:1 multiplexers with a differential output. The select inputs (SEL0,1,2,3) control which one of the sixteen data inputs (A 0 –A 15 ) is propagated to the output. Special attention to the design layout results in a typical skew between the 16 inputs of only 50ps. ■ Differential output ■ Fully compatible with industry standard 10KH, 100K ECL levels ■ Internal 75KΩ input pull-down resistors ■ Fully compatible with Motorola MC10E/100E164 ■ Available in 28-pin PLCC package BLOCK DIAGRAM PIN NAMES Pin A0 Q A1 16:1 A14 Q A15 Function A0 – A15 Data Inputs SEL[0:3] Select Inputs Q, Q Outputs VCCO VCC to Output SEL0 SEL1 SEL2 SEL3 M9999-032006 hbwhelp@micrel.com or (408) 955-1690 Rev.: G 1 Amendment: /0 Issue Date: March 2006 SY10E164 SY100E164 Micrel, Inc. A12 Ordering Information(1) A13 A14 A15 VCCO A11 A10 PACKAGE/ORDERING INFORMATION 25 24 23 22 21 20 19 A9 18 26 A8 SEL3 27 17 28 16 VEE SEL2 SEL0 SEL1 1 PLCC TOP VIEW J28-1 2 15 14 6 7 8 9 A4 A3 A2 10 11 A1 5 A5 12 A6 13 A7 3 4 28-Pin PLCC (J28-1) NC NC VCC Q Q VCCO A0 Part Number Package Type Operating Range Package Marking Lead Finish SY10E164JC J28-1 Commercial SY10E164JC Sn-Pb SY10E164JCTR(2) J28-1 Commercial SY10E164JC Sn-Pb SY100E164JC J28-1 Commercial SY100E164JC Sn-Pb SY100E164JCTR(2) J28-1 Commercial SY100E164JC Sn-Pb SY10E164JZ(3) J28-1 Commercial SY10E164JZ with Pb-Free bar-line indicator Matte-Sn SY10E164JZTR(2, 3) J28-1 Commercial SY10E164JZ with Pb-Free bar-line indicator Matte-Sn SY100E164JZ(3) J28-1 Commercial SY100E164JZ with Pb-Free bar-line indicator Matte-Sn SY100E164JZTR(2, 3) J28-1 Commercial SY100E164JZ with Pb-Free bar-line indicator Matte-Sn Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 2 SY10E164 SY100E164 Micrel, Inc. TRUTH TABLE SEL3 SEL2 SEL1 SEL0 Data SEL3 SEL2 SEL1 SEL0 Data L L L L L L A0 H L L L A8 L H A1 L H L L H A9 L H L A2 H L H L A10 L L H H A3 H L H H A11 L H L L A4 H H L L A12 L H L H A5 H H L H A13 L H H L A6 H H H L A14 L H H H A7 H H H H A15 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0°C Symbol Parameter IIH Input HIGH Current IEE Power Supply Current 10E 100E TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Condition — — 150 — — 150 — — 150 µA — mA — — — 59 59 71 71 — — 59 59 71 71 — — 59 68 71 81 Unit Condition ps — AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0°C Symbol tPD Parameter Propagation Delay to Output A Input SEL0 SEL1 SEL2 SEL3 tskew Within-Device Skew tr tf Rise/Fall Times 20–80% TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 350 500 400 400 400 600 700 675 675 550 850 900 900 900 700 350 500 400 400 400 600 700 675 675 550 850 900 900 900 700 350 500 400 400 400 600 700 675 675 550 850 900 900 900 700 — 50 — — 50 — — 50 — ps 1 275 400 550 275 400 550 275 400 550 ps — Note: 1. Within-device skew is defined as the difference in the A to Q delay between the 16 different A inputs. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 3 SY10E164 SY100E164 Micrel, Inc. 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 4