SY10EL57ZG-TR

NOT RECOMMENDED FOR NEW DESIGNS SY10EL57 SY100EL57 SY10EL57 4:1 DIFFERENTIAL MULTIPLEXER Micrel, Inc. FEATURES SY100EL57 DESCRIPTION ■ 5V power supply ■ Useful as either 4:1 or 2:1 multiplexer ■ VBB output for single-ended operation ■ 75KΩ internal input pulldown resistors ■ Available in 150 mil 16-pin SOIC package The SY10/100EL57 are fully differential 4:1 multiplexers. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input selecting between D0 and D1. The fully differential architecture of the EL57 makes it ideal for use in low skew applications such as clock distribution. The SEL1 is the most significant select line. The binary number applied to the select inputs will select the same numbered data input (i.e., 00 selects D0). Multiple VBB outputs are provided for single-ended or AC coupled interfaces. In these scenarios, the VBB output should be connected to the data bar inputs and bypassed via a 0.01µF capacitor to ground. Note that the VBB output can source/sink up to 0.5mA of current without upsetting the voltage level. PIN NAMES TRUTH TABLE SEL1 SEL0 DATA OUT Pin L L D0 D0-3 Differential Data Inputs L H D1 SEL0, 1 Mux Select Inputs H L D2 VBB1, 2 Reference Outputs H H D3 Q Data Outputs M9999-021910 hbwhelp@micrel.com or (408) 955-1690 1 Function Rev.: H Amendment: /0 Issue Date: February 2010 SY10EL57 SY100EL57 Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) 16 VCC 1 D0 Part Number Package Marking Lead Finish Z16-2 Commercial SY10EL57ZC Sn-Pb 14 3 D1 13 4 D1 Commercial SY10EL57ZC Sn-Pb Z16-2 Commercial SY100EL57ZC Sn-Pb SY100EL57ZCTR(2) Z16-2 Commercial SY100EL57ZC Sn-Pb SY10EL57ZI Z16-2 Industrial SY10EL57ZI Sn-Pb Z16-2 Industrial SY10EL57ZI Sn-Pb Z16-2 Industrial SY100EL57ZI Sn-Pb 4:1 Z16-2 SY100EL57ZC Q SY10EL57ZCTR (2) Operating Range SEL1 15 2 D0 SEL0 SY10EL57ZC Package Type SY10EL57ZITR Q 12 5 D2 9 8 VEE D3 10 7 VBB2 D3 11 6 VBB1 D2 16-Pin SOIC (Z16-1) (2) SY100EL57ZI SY100EL57ZITR (2) Z16-2 Industrial SY100EL57ZI Sn-Pb SY10EL57ZG(3) Z16-2 Industrial SY10EL57ZG with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL57ZGTR(2, 3) Z16-2 Industrial SY10EL57ZG with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL57ZG(3) Z16-2 Industrial SY100EL57ZG with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL57ZGTR(2, 3) Z16-2 Industrial SY100EL57ZG with Pb-Free bar-line indicator Pb-Free NiPdAu Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-021910 hbwhelp@micrel.com or (408) 955-1690 2 SY10EL57 SY100EL57 Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VEE Power Supply (VCC = 0V) –8.0 to 0 V VIN Input Voltage (VCC = 0V) 0 to -6.0 V IOUT Output Current - Continuous - Surge 50 100 mA TLEAD Lead Storage Temperature +260 ˚C TA Operating Temperature Range -40 to +85 ˚C VEE Operating Range(1), (2) -5.7 to -4.2 V Notes: 1. Absolute maximum ratings, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. 2. Parametric values specified at: 5 volt Power Supply Range 100EL57 Series: -4.2V to -5.5V. 10EL57 Series -4.75V to -5.5V. 10EL DC CHARACTERISTICS VEE = -5.5 to -4.75V; VCC = GND = 0V(1) TA = -40˚C Symbol Parameter TA = 0˚C TA = +25˚C TA = +85˚C Min. Max. Min. Max. MIn. Max. Min. Max. Unit VOH Output HIGH Voltage -1080 -890 -1020 -840 -980 -810 -910 -720 mV VOL Output LOW Voltage -1950 -1650 -1950 -1630 -1950 -1630 -1950 -1595 mV VIH Input HIGH Voltage -1230 -890 -1170 -840 -1130 -810 -1060 -720 mV VIL Input LOW Voltage -1950 -1500 -1950 -1480 -1950 -1480 -1950 -1445 mV IIL Input LOW Current 0.5 — 0.5 — 0.5 — 0.5 — µA Note: 1. 10EL circuits are designed to meet the DC specifications shown in the table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Outputs are terminated through a 50Ω resistor to -2.0V except where otherwise specified on the individual data sheets. 100EL DC CHARACTERISTICS VEE = -5.5 to -4.75V; VCC = GND = 0V(1) TA =-40˚C Symbol Parameter TA =0˚C to 85C Min. Typ. Max. Min. Typ. Max. Unit Condition VOH Output HIGH Voltage -1085 -1005 -880 -1025 -955 -880 mV VIN = VIH (Max) or VIL (Min) VOL Output LOW Voltage -1830 -1695 -1555 -1810 -1705 -1620 mV VIN = VIH (Max) or VIL (Min) VOHA Output HIGH Voltage -1095 — — -1035 — — mV VIN = VIH (Min) or VIL (Max) VOLA Output LOW Voltage — — -1555 — — -1610 mV VIN = VIH (Min) or VIL (Max) VIH Input HIGH Voltage -1165 — -880 -1165 — -880 mV VIL Input LOW Voltage -1810 — -1475 -1810 — -1475 mV IIL Input LOW Current 0.5 — — 0.5 — — µA VIN = VIL (Max) Note: 1. The same DC parameter values at VEE = -4.5V now apply across the full VEE range of -4.2V to -5.5V. Outputs are terminated through a 50Ω resistor to -2.0V except where otherwise specified on the individual data sheets. M9999-021910 hbwhelp@micrel.com or (408) 955-1690 3 SY10EL57 SY100EL57 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = -5.5 to -4.2V; VCC = GND = 0V TA = -40°C Symbol Parameter IEE Power Supply Current VBB Output Reference 10EL Voltage 100EL IIH Input HIGH Current TA = 0°C TA = +25°C TA = +85˚C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. — — 15 15 24 24 — — 15 15 24 24 — — 15 15 24 24 — — 15 15 24 27 mA -1.43 -1.38 — — -1.30 -1.26 -1.38 -1.38 — — -1.27 -1.26 -1.35 -1.38 — — -1.25 -1.26 -1.31 -1.38 — — -1.19 -1.26 V — — 150 — — 150 — — 150 — — 150 µA Unit 10EL 100EL Max. Unit AC ELECTRICAL CHARACTERISTICS VEE = -5.5 to -4.2V; VCC = GND = 0V TA = -40°C Symbol tPD TA = 0°C TA = +25°C TA = +85˚C Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Propagation Delay DATA to Q/Q SEL to Q/Q 350 440 — — 550 690 350 440 — — 550 690 360 440 — — 560 690 380 460 — — 580 710 — — 50 — — 50 — — 50 — — 50 ps tskew Input Skew DATA to Q VPP Minmum Input Swing DATA 150 — — 150 — — 150 — — 150 — — Common Mode Range DATA -2.0 — -0.4 -2.0 — -0.4 -2.0 — -0.4 -2.0 — -0.4 125 — 375 125 — 375 125 — 375 125 — 375 VCMR tr tf Output Rise/Fall Times Q (20% - 80%) M9999-021910 hbwhelp@micrel.com or (408) 955-1690 ps mV V 4 ps SY10EL57 SY100EL57 Micrel, Inc. 16-PIN SOIC .150" WIDE (Z16-2) Rev. 02 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-021910 hbwhelp@micrel.com or (408) 955-1690 5