SY10EP05VKI-TR

SY10EP05V 3.3V/5V ECL Differential AND/NAND Features General Description • • • • The SY10EP05V is a 2-input differential AND/NAND gate. The device is functionally equivalent to the EL05 device. With AC performance much faster that the EL05 device, the EP05V is ideal for applications requiring the fastest AC performance available. 3.3V or 5V Power Supply Options 180 ps Typical Propagation Delay Maximum Frequency: 3 GHz Typical Internal Input Resistors: Pull-Down on D, Pull-Down and Pull-Up on /D • Q Output will Default Low with Inputs Open or at VEE • Transistor Count: 126 • Available in 8-Lead SOIC Package Package Type SY10EP05V SOIC-8 (Z) (Top View) D0 1  2020 Microchip Technology Inc. 8 VCC /D0 2 7 Q D1 3 6 /Q /D1 4 5 VEE DS20006252A-page 1 SY10EP05V 1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings † PECL Power Supply Voltage (VCC) (Note 1) ........................................................................................................... +6.0V NECL Power Supply Voltage (VEE) (Note 2) ........................................................................................................... –6.0V PECL Mode Input Voltage (VIN) (Note 3)................................................................................................................. +6.0V NECL Mode Input Voltage (VIN) (Note 4)................................................................................................................. –6.0V Continuous Output Current (IOUT) .......................................................................................................................... 50 mA Surge Output Current (IOUT) ................................................................................................................................. 100 mA † Notice: Stresses above those listed under “Absolute Maximum ratings” may cause permanent damage to the device. Exposure to maximum rating conditions for extended periods may affect device reliability. Note 1: VEE = 0V. 2: VCC = 0V. 3: VEE = 0V, VIN ≤ VCC. 4: VCC = 0V, VIN ≥ VEE. DC ELECTRICAL CHARACTERISTICS Electrical Characteristics: VCC = 3.0V to 5.5V; VEE = 0V or VEE = –5.5V to –3.0V; VCC = 0V; TA = –40°C to +85°C, unless otherwise stated, (Note 1) Parameter Symbol Min. Typ. Max. Units Power Supply Current IEE — 22 29 mA Output High Voltage (Note 2) VCC – 1.135 VCC – 1.060 VCC – 0.885 VOH VCC – 1.070 VCC – 0.945 VCC – 0.820 Output Low Voltage (Note 2) VOL Input High Voltage (Single-Ended) VIH Input Low Voltage (Single-Ended) Common Mode Range (Note 3) Input High Current Input Low Current D Input Low Current /D Note 1: 2: 3: VIL VIHCMR IIH IIL Condition — TA = –40°C V TA = +25°C VCC – 1.010 VCC – 0.885 VCC – 0.760 TA = +85°C VCC – 1.950 VCC – 1.810 VCC – 1.685 TA = –40°C VCC – 1.950 VCC – 1.745 VCC – 1.620 VCC – 1.950 VCC – 1.685 VCC – 1.560 VCC – 1.210 — VCC – 0.885 VCC – 1.145 — VCC – 0.820 V TA = +25°C TA = +85°C TA = –40°C V TA = +25°C VCC – 1.085 — VCC – 0.760 TA = +85°C VCC – 1.935 — VCC – 1.610 TA = –40°C VCC – 1.870 — VCC – 1.545 VCC – 1.810 — VCC – 1.485 VEE + 2.0 — VCC V — μA — μA VIN = VIL(MIN) — — 150 0.5 — — –150 — — V TA = +25°C TA = +85°C Devices are designed to meet the DC specifications shown in the table above after thermal equilibration has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500 lfpm is maintained. Outputs are terminated through a 50Ω resistor to VCC – 2.0V. The CMR range is referenced to the most positive side of the differential input voltage. Normal operation is obtained if the high level falls within the specified range and the peak-to-peak voltage lies between 150 mV and 1.2V. DS20006252A-page 2  2020 Microchip Technology Inc. SY10EP05V AC ELECTRICAL CHARACTERISTICS Electrical Characteristics: VCC = 3.0V to 5.5V; VEE = 0V or VEE = –5.5V to –3.0V; VCC = 0V; TA = –40°C to +85°C, unless otherwise stated. All loading with a 50Ω resistor to VCC – 2.0V. Parameter Symbol Min. Typ. Max. Units Maximum Toggle Frequency (Note 1) fMAX — 3.0 — GHz — Propagation Delay D-to-Q (Differential) tPLH, tPHL 160 180 260 ps — Input Voltage Swing (Differential Configuration, Note 2) VPP 150 800 1200 mV — Output Rise/Fall Time Q (20% to 80%) tr/tf ps TA = +25°C 70 — 170 80 130 180 100 — 200 Conditions TA = –40°C TA = +85°C Measured with 750 mV input signal, 50% duty cycle. fMAX guaranteed for functionality only. VOL and VOH are guaranteed at DC only. Input swing for which AC parameters are ensured. Note 1: 2: TEMPERATURE SPECIFICATIONS Parameters Sym. Min. Typ. Max. Units Conditions Temperature Ranges TLEAD — — +260 °C Soldering, 20 sec. Operating Temperature Range TA –40 — +85 °C — Storage Temperature Range TS –65 — +150 °C — Lead Temperature Package Thermal Resistances Thermal Resistance, SOIC-8Ld θJA θJC — 160 — °C/W Still-Air — 109 — °C/W 500 lfpm — 39 — °C/W — TRUTH TABLE D0 D1 /D0 /D1 Q /Q L L H H L H L H H L L H H L L H L H H H L L H L  2020 Microchip Technology Inc. DS20006252A-page 3 SY10EP05V 2.0 PIN DESCRIPTIONS The descriptions of the pins are listed in Table 2-1. TABLE 2-1: PIN FUNCTION TABLE Pin Name Pin Number D0, /D0 D1, /D1 1, 2 3, 4 VEE 5 /Q, Q 6, 7 VCC 8 DS20006252A-page 4 Description ECL Data Inputs. Negative Supply Voltage. ECL Data Outputs. Positive Supply Voltage.  2020 Microchip Technology Inc. SY10EP05V 3.0 PACKAGING INFORMATION 3.1 Package Marking Information 8-Lead SOIC* XXXXXX WNNN Legend: XX...X Y YY WW NNN e3 * Example HEP05V 6791 Product code or customer-specific information Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week ‘01’) Alphanumeric traceability code Pb-free JEDEC® designator for Matte Tin (Sn) This package is Pb-free. The Pb-free JEDEC designator ( e3 ) can be found on the outer packaging for this package. ●, ▲, ▼ Pin one index is identified by a dot, delta up, or delta down (triangle mark). Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. Package may or may not include the corporate logo. Underbar (_) and/or Overbar (‾) symbol may not be to scale.  2020 Microchip Technology Inc. DS20006252A-page 5 SY10EP05V Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging. DS20006252A-page 6  2020 Microchip Technology Inc. SY10EP05V APPENDIX A: REVISION HISTORY Revision A (January 2020) • Converted Micrel document SY10EP05V to Microchip data sheet DS20006252A. • Minor text changes throughout. • Removal of all reference to the MSOP package option for the device.  2020 Microchip Technology Inc. DS20006252A-page 7 SY10EP05V NOTES: DS20006252A-page 8  2020 Microchip Technology Inc. SY10EP05V PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, contact your local Microchip representative or sales office. Part No. X X X -XX Device Supply Voltage Package Temp. Range Packing Device: SY10EP05: Supply Voltage: V = 3.3V/5V Package: Z = 8-Lead SOIC Temperature Range: G = –40°C to +85°C (NiPdAu Pb-Free) Packing: = TR = ECL Differential AND/NAND Examples: a) SY10EP05VZG: SY10EP05, 3.3V/5V, 8-Lead SOIC, –40°C to +85°C Temperature Range, 95/Tube b) SY10EP05VZG-TR: SY10EP05, 3.3V/5V, 8-Lead SOIC, –40°C to +85°C Temperature Range, 1,000/Reel Note 1: Tape and Reel identifier only appears in the catalog part number description. This identifier is used for ordering purposes and is not printed on the device package. Check with your Microchip Sales Office for package availability with the Tape and Reel option. 95/Tube 1,000/Reel  2020 Microchip Technology Inc. DS20006252A-page 9 SY10EP05V NOTES: DS20006252A-page 10  2020 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights unless otherwise stated. Trademarks The Microchip name and logo, the Microchip logo, Adaptec, AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, chipKIT, chipKIT logo, CryptoMemory, CryptoRF, dsPIC, FlashFlex, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus, maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PackeTime, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, TempTrackr, TimeSource, tinyAVR, UNI/O, Vectron, and XMEGA are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, FlashTec, Hyper Speed Control, HyperLight Load, IntelliMOS, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet-Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, Vite, WinPath, and ZL are registered trademarks of Microchip Technology Incorporated in the U.S.A. Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, EtherGREEN, In-Circuit Serial Programming, ICSP, INICnet, Inter-Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, SAM-ICE, Serial Quad I/O, SMART-I.S., SQI, SuperSwitcher, SuperSwitcher II, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. The Adaptec logo, Frequency on Demand, Silicon Storage Technology, and Symmcom are registered trademarks of Microchip Technology Inc. in other countries. GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2020, Microchip Technology Incorporated, All Rights Reserved. For information regarding Microchip’s Quality Management Systems, please visit www.microchip.com/quality.  2020 Microchip Technology Inc. ISBN: 978-1-5224-5517-2 DS20006252A-page 11 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Australia - Sydney Tel: 61-2-9868-6733 India - Bangalore Tel: 91-80-3090-4444 China - Beijing Tel: 86-10-8569-7000 India - New Delhi Tel: 91-11-4160-8631 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 China - Chengdu Tel: 86-28-8665-5511 India - Pune Tel: 91-20-4121-0141 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 China - Chongqing Tel: 86-23-8980-9588 Japan - Osaka Tel: 81-6-6152-7160 Finland - Espoo Tel: 358-9-4520-820 China - Dongguan Tel: 86-769-8702-9880 Japan - Tokyo Tel: 81-3-6880- 3770 China - Guangzhou Tel: 86-20-8755-8029 Korea - Daegu Tel: 82-53-744-4301 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 China - Hangzhou Tel: 86-571-8792-8115 Korea - Seoul Tel: 82-2-554-7200 China - Hong Kong SAR Tel: 852-2943-5100 Malaysia - Kuala Lumpur Tel: 60-3-7651-7906 China - Nanjing Tel: 86-25-8473-2460 Malaysia - Penang Tel: 60-4-227-8870 China - Qingdao Tel: 86-532-8502-7355 Philippines - Manila Tel: 63-2-634-9065 China - Shanghai Tel: 86-21-3326-8000 Singapore Tel: 65-6334-8870 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 China - Shenyang Tel: 86-24-2334-2829 Taiwan - Hsin Chu Tel: 886-3-577-8366 Germany - Rosenheim Tel: 49-8031-354-560 China - Shenzhen Tel: 86-755-8864-2200 Taiwan - Kaohsiung Tel: 886-7-213-7830 Israel - Ra’anana Tel: 972-9-744-7705 China - Suzhou Tel: 86-186-6233-1526 Taiwan - Taipei Tel: 886-2-2508-8600 China - Wuhan Tel: 86-27-5980-5300 Thailand - Bangkok Tel: 66-2-694-1351 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 China - Xian Tel: 86-29-8833-7252 Vietnam - Ho Chi Minh Tel: 84-28-5448-2100 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Austin, TX Tel: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Tel: 317-536-2380 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Tel: 951-273-7800 Raleigh, NC Tel: 919-844-7510 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Tel: 408-436-4270 Canada - Toronto Tel: 905-695-1980 Fax: 905-695-2078 DS20006252A-page 12 China - Xiamen Tel: 86-592-2388138 China - Zhuhai Tel: 86-756-3210040 Germany - Garching Tel: 49-8931-9700 Germany - Haan Tel: 49-2129-3766400 Germany - Heilbronn Tel: 49-7131-72400 Germany - Karlsruhe Tel: 49-721-625370 Italy - Padova Tel: 39-049-7625286 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Norway - Trondheim Tel: 47-7288-4388 Poland - Warsaw Tel: 48-22-3325737 Romania - Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenberg Tel: 46-31-704-60-40 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820  2020 Microchip Technology Inc. 05/14/19