TCAD002

Page 1 of 1 Part Number TCAD002 - Microstick Plus USB Peripheral Board The Microstick Plus USB board provides the hardware interface for Microchip’s USB libraries and example code (see http://en.microstickplus.com/usb/prog), allowing for quick and easy development of USB solutions for Device, Host, or On-The-Go applications. This peripheral board contains three USB connectors: USB Host A, USB Mini B, and USB Micro AB. In addition, the board contains a push button, configuration switches, and status LEDs. The Microstick Plus USB board can be used alone with the Microstick II to develop on 28-pin microcontrollers with built-in USB peripherals—which include devices from both the 16-bit PIC24F family and the 32-bit PIC32MX2 family. In addition, this board can be connected to the original Microstick Plus Development Board or to a breadboard via pin headers. Features: • • • • • • • • USB Mini B connector - for device communication. USB Host A connector - for master (Host) communication. USB Micro AB connector - for On-The-Go (OTG) communication. 1 user push button 2 software controlled user LED 8 MHz quartz crystal 2 configuration switches USB over current protection IC (MIC2005A-1YM5) with output enable input pin and over current output pin ChipCAD is a trusted third-party tool provider http://www.microchipdirect.com/productsearch.aspx?keywords=TCAD002 5/4/2015