Softlog ICP2PORT-P Production Quality In-Circuit Service Programmer
Part Number: TPG100010
The Softlog ICP2PORT-P Production Quality In-Circuit Service Programmer is specially designed to meet your
service programming needs. This compact, battery-powered device supports up to six different programming
environments, making it an ideal, low-cost solution for field upgrades.
Note: All technical support and warranty service will be provided by Softlog. You can contact them at
support@softlog.com.
Features
Fast programming of Microchip® 8-bit PIC® MCUs, 16-bit PIC MCUs and dsPIC® DSCs, and serial EEPROMs
On-board 4MB flash memory for non-volatile storage of 6 environments
Supports 3 serialization schemes: sequential, random, and user file (1 to 8 bytes)
Vdd and Vpp overload protection protects programmer and devices to be programmed
Power supply: 3 AAA batteries, USB or power adapter
Configurable counter allows control of the number of upgrades performed
Programmable Vdd (2.0 to 5.5V) and Vpp (2.0 to 13.5V)
Programmable clock/data speed (500KHz to 2.5MHz)
Programmable delay between Vdd and Vpp (0.1 to 250ms)
Programmable Vdd source (programmer or target)
Vdd current limit: 50 mA
Prevents damage to connected microcontroller in case of power ON and power OFF
http://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=TPG100010
2/19/2015
Additional Information
Softlog Production Quality In-Circuit Programmers
Softlog production quality programmers can program up to 64 target boards simultaneously, and offer advanced features such as Secure Programming, DLL support, and
High Current drive. Softlog has produced production quality programmers since 1998.
Several models of Softlog programmers are available. All models program 8-bit devices, including PIC12C, PIC16C, PIC10F, PIC12F, PIC16(L)F, PIC18F, PIC18F(J),
and PIC18F(K). The following options are available:
Option D – DLL/Command Line Support for control by external programs or batch files
Option P – dsPIC/PIC24 Device Support
Option S – Security Support for strong encryption and to limit the number of devices programmed (more information)
Option K – Keeloq Support
Option X – PIC32 Support
Microchip
P/N
Softlog P/N
Channels
Battery
Drive
Capability
DLL/Command Line Support
(D)
dsPIC/PIC24 Support
(P)
Security Support
(S)
TPG100001
ICP2
1
-
Normal
-
-
-
TPG100002
ICP2-DS
1
-
Normal
Yes
Yes
-
TPG100004
ICP2GANGDP
4
-
Normal
Yes
Yes
-
TPG100005
ICP2GANG
4
-
Normal
-
-
-
TPG100006
ICP2GANGDS
4
-
Normal
Yes
-
Yes
TPG100007
ICP2-DS
1
-
Normal
Yes
-
Yes
TPG100008
ICP2(HC)
1
-
High
-
-
-
TPG100009
ICP2PORT
1
Yes
Base
-
-
-
TPG100010
ICP2PORT-P
1
Yes
Base
-
Yes
-
Note 1: Keeloq Support(K) and PIC32 Support(X) are not available for these models
Note 2: Any support option (D/P/S/K/X) can be activated remotely. Upgrades for secure programming (S) are available from microchipDIRECT. For other options,
contact Softlog Systems for details.
Note 3: ICP2 programmers can be powered by USB, or by external power adapter (included). ICP2GANG programmers are powered by external power adapter
(included).
Note 4: ICP2PORT programmers can be powered by USB, batteries (3 type AAA), or external power adapter (not included).
Capabilities of High-Current Programmer
The ICP2(HC) model is designed for target boards with high current requirements:
Parameter
Microchip P/N: TPG100001
Microchip P/N: TPG100008
Softlog P/N: ICP2
Softlog P/N: ICP2(HC)
Supply from USB
Yes (VDD current is limited to 40mA)
Not Available
VDD current, max
250mA (recommended till 100mA)
1000mA
VPP capacitive load, max
22nF
100nF
VPP current, max
25mA
100mA
Clock current, max
5mA (due to in-series resistor 150Ω)
100mA
Data current, max
5mA (due to in-series resistor 150Ω)
100mA
Gang Programmers Can Be Daisy-Chained
ICP2GANG programmers can be daisy-chained together to program up to 64 target devices simultaneously. Only a single USB or RS-232 connection to a PC is required,
diagram shown above.
Full Featured GUI Programming Software
Control of ICP2 and ICP2GANG programmers is provided via MPLAB IDE plug-in, or a stand-alone GUI application, screenshot shown above.
Unique Secure Programming Capability
The secure programming feature dramatically reduces the risk of unauthorized reconstruction of hex files, and also limits how many times a hex file can be programmed.
Secure programming operates on two levels: the ADMIN level and the USER level.
The ADMIN level of operation corresponds to the developer or owner of the software.
The USER level corresponds to a contract manufacturer or anyone authorized to program devices.
Using the Softlog Integrated Software, the ADMIN initializes the programmer with unique password, ID number and secure buffer. Once initialized, the programmer may
be shipped to a contract manufacturer. The ADMIN can update the programmer remotely by sending encrypted files to the USER.
To begin a programming job, the ADMIN uses the Softlog Integrated Software to create an environment file. The environment file includes hex data, configuration info,
and one optional piece of information: a counter that specifies the maximum number of successfully programmed devices. The environment file is protected using strong
encryption, and can only be decoded by a programmer that has been initialized with the correct password and ID number.
The optional counter of successfully programmed devices is stored in non-volatile memory of the programmer. It can be used to ensure that only an authorized number
of devices are programmed from a particular environment file.
The optional secure buffer provides an extra level of security by replacing a portion of the hex data memory image with dummy values. The content of the secure buffer
is stored in protected memory within the programmer, and is programmed into the target device after the complete memory image (including dummy data) has been
programmed and verified.
Note: Any security protocol or encryption scheme can be broken, if the attacker is sufficiently motivated and has access to the necessary resources and expertise. The
Softlog Secure Programming feature is designed to dramatically reduce this risk.
The Secure Programming option can be added to any ICP2 or ICP2GANG programmer, no matter when or where it was purchased:
Softlog SEC-DS Secure Programming Upgrade for ICP2 Programmers (SW500090)
Softlog SEC4CH-DS Secure Programming Upgrade for ICP2GANG Programmers (SW500091)
http://www.microchip.com/Developmenttools/ProductDetails.aspx?PartNO=TPG100010
2/19/2015
很抱歉,暂时无法提供与“TPG100010”相匹配的价格&库存,您可以联系我们找货
免费人工找货