UES2606

UES2604 – UES2606 Available High-Reliability screening available HIGH EFFICIENCY RECTIFIERS 30A Center-Tap DESCRIPTION The UES2604 through UES2606 series is specifically designed for operation in power switching circuits operating at frequencies of at least 20 kHz. This series combines two high efficiency devices into one package, simplifying installation, reducing heat sink requirements and the need to purchase matched components. Microsemi also offers numerous other products to meet higher and lower power voltage regulation applications. TO-204AA (TO-3) Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • Very low forward voltage (see Figure 3). Very fast recovery times (50 nsec). High surge capability. Low thermal resistance. High-reliability screening option. Both polarities available. RoHS compliant devices available. APPLICATIONS / BENEFITS • • • • Catch diodes for switching regulators. Output rectifiers for high frequency square-wave inverters. Low-profile package. Mechanically rugged. MAXIMUM RATINGS Parameters/Test Conditions Symbol Junction and Storage Temperature Thermal Resistance Junction-to-Case Repetitive Peak Inverse Voltage UES2604(HR2) UES2605(HR2) UES2606(HR2) o Maximum Average DC Output Current @ TC = 100 C Non-Repetitive Sinusoidal Surge Current (8.3 ms) TJ and TSTG R ӨJC V RRM IO I FSM Value -55 to +150 1 200 300 400 30 300 Unit o C C/W V o A A MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0221, Rev. 1 (112053) ©2011 Microsemi Corporation Page 1 of 6 UES2604 – UES2606 MECHANICAL and PACKAGING • • • • • • CASE: TO-204AA (TO-3) metal can. TERMINALS: Tin-lead plating over nickel. RoHS compliant matte-tin plating is also available. MARKING: MSC part number, date code, polarity symbol. POLARITY: STANDARD (Positive Output) Anode 1 is pin #1, Anode 2 is pin #2, Common Cathode is the case. REVERSE (Negative Output) Cathode 1 is pin #1, Cathode 2 is pin #2, Common Anode is the case. WEIGHT: Approximately 12.7 grams. See Package Dimensions on last page. OPTIONAL HIGH RELIABILITY (HR2) SCREENING The following tests are performed on 100% of the devices specified UES2604HR2, 5HR2, 6HR. SCREEN 1. High Temperature 2. Thermal Shock (Temperature Cycling) 3. Hermetic Seal a. Fine b. Gross 4. Thermal Impedance 5. Interim Electrical Parameters 6. High Temperature Reverse Blocking 7. Final Electrical Parameters MIL-STD-750 METHOD 1032 1051 1071 GO/NO GO Similar to Method 1040 GO/NO GO CONDITIONS 24 Hours @ T A = 150 oC G, 20 Cycles, -55 to +150 oC. No dwell required @ 25 oC, t > 1 minute @ extremes H, Helium C, Liquid Sage Test V F and I R @ 25 oC ½ Sine Reverse, t = 48 hours, T C = 125 oC, V RWM = rating, f = 50-60 Hz, I O = 0 A V F + I R @ 25 oC PDA = 10% (Final Electricals) PART NOMENCLATURE UES 2604 R HR2 (e3) High Efficiency Diode RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Series number (see Electrical Characteristics table) Screening HR2 = High-Reliability blank = Standard reliability Polarity R = Reverse Blank = Standard T4-LDS-0221, Rev. 1 (112053) ©2011 Microsemi Corporation Page 2 of 6 UES2604 – UES2606 SYMBOLS & DEFINITIONS Definition Symbol IF I FM I FSM IO IR t rr VF VR V RRM V RWM Forward Current: The forward current dc value, no alternating component. Maximum Peak Forward Current: The peak total value of the forward current dc value. Maximum Forward Surge Current: The forward current, surge peak or rated forward surge current. Average Rectified Output Current: The output current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Reverse Voltage: The reverse voltage dc value, no alternating component. Repetitive Peak Reverse Voltage: The peak reverse voltage including all repetitive transient voltages but excluding all non-repetitive transient voltages. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range excluding all transient voltages (ref JESD282-B). Also sometimes known as PIV. ELECTRICAL CHARACTERISTICS per Leg Type UES2604/2604HR2 UES2605/2605HR2 UES2606/2606HR2 PIV 200 V 300 V 400 V Maximum Forward Voltage – V F @ T C = 25oC 1.25 V @ 15 A T P = 300 µs T C = 125oC 1.15 V @ 15 A T P = 300 µs Maximum Reverse Current – I R @ TC = T C = 25oC 125oC 50 µA 10 mA Maximum Reverse Recovery Time - trr (Note 1) 50 ns NOTES: 1. Measured in circuit I F = 0.5 A, I R = 1 A, I REC = 0.25 A. T4-LDS-0221, Rev. 1 (112053) ©2011 Microsemi Corporation Page 3 of 6 UES2604 – UES2606 IFM – PEAK OUTPUT CURRENT (A) IO – OUTPUT CURRENT (A) GRAPHS T C – CASE TEMPERATURE (oC) FIGURE 2 Peak Output Current vs. Case Temperature IF – FORWARD CURRENT (A) IR – REVERSE CURRENT (µA) FIGURE 1 Output Current vs. Case Temperature T C – CASE TEMPERATURE (oC) V F – FORWARD VOLTAGE (V) V R – REVERSE VOLTAGE (% of PIV) FIGURE 3 Forward Current vs. Forward Voltage FIGURE 4 Typical Reverse Current vs. Reverse Voltage T4-LDS-0221, Rev. 1 (112053) ©2011 Microsemi Corporation Page 4 of 6 UES2604 – UES2606 IFSM – CURRENT (A) ZӨJX – THERMAL IMPEDANCE (oC/W) GRAPHS (continued) N – CYCLES OF 60 Hz SINEWAVE FIGURE 5 Maximum Forward Surge vs. Number of Cycles t p – PULSE WIDTH (ms) FIGURE 6 Thermal Impedance vs. Pulse Width FIGURE 7 Reverse-Recovery Circuit NOTES: 1. Oscilloscope: Rise time ≤ 3 ns; input impedance = 50 Ω. 2. Pulse Generator: Rise time ≤ 8 ns; source impedance 10 Ω. 3. Current viewing resistor, non-inductive, coaxial recommended. T4-LDS-0221, Rev. 1 (112053) ©2011 Microsemi Corporation Page 5 of 6 UES2604 – UES2606 PACKAGE DIMENSIONS NOTE: Standard polarity is positive output. For reverse polarity (negative output) add suffix “R”, i.e. UES2604R. (See schematic below.) DIM A B C D E F G H J K L M INCH .875 MAX. .135 MAX. .250-.450 .312 MIN. .038-.043 DIA. .188 MAX. RAD. 1.177-1.197 .655-.675 .205-.225 .420-.440 .525 MAX. RAD. .151-.161 DIA. MILLIMETERS 22.23 MAX. 3.43 MAX. 6.35-11.43 7.92 MIN. 0.97-1.09 DIA 4.78 MAX. RAD. 29.90-30.40 16.64-17.15 5.21-5.72 10.67-11.18 13.34 MAX. RAD. 3.84-4.09 DIA. SCHEMATIC Cathode to Case (Standard) T4-LDS-0221, Rev. 1 (112053) Anode to Case (Reverse) ©2011 Microsemi Corporation Page 6 of 6