UPP9401E3/TR7

UPP9401e3 Compliant Powermite Package Commercial Two-Way Radio Antenna Switch Diode DESCRIPTION This Microsemi Powermite PIN diode is perfect for two-way radio antenna switch applications where size and power handling capability are critical with its high isolation, low loss and low distortion characteristics. Its advantages also include the low forward-bias resistance and high zero-bias impedance that are essential for low loss, high isolation and wide bandwidth antenna switch performance. It is an ideal selection for applications requiring low profile and highdensity mounting and is also RoHS compliant. The Powermite package provides a full-metallic bottom that eliminates the possibility of solder flux entrapment during assembly, which in combination with its unique locking tab acts as an efficient heat path to the mounting surface. Its innovative design makes this device ideal for use with automatic insertion equipment. Microsemi also offers numerous other products to meet higher and lower power voltage regulation applications. DO-216 Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • High power surface mount package with very low thermal resistance. • Specified low distortion. • Low bias current requirements. • High zero bias impedance. • Full metallic bottom eliminates flux entrapment. • Integral heat sink/locking tabs. • RoHS compliant. APPLICATIONS / BENEFITS • • • • • • Two-way radio antenna switch. Low forward bias resistance. Low loss high isolation for wide bandwidth performance. Small size DO-216 package. Compatible with automatic insertion equipment. Very low inductance and capacitance. MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Case (1) Steady-State Power Dissipation @ T TAB1 = 75 ºC Reverse Voltage Solder Temperature @ 10 s Symbol T J and T STG R ӨJC PD VR T SP Value -55 to +150 10 2.5 50 260 Notes: 1. When mounted on a PC board with 2 oz copper. Unit ºC ºC/W W V o C MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01105, Rev. 1 (1/10/13) ©2013 Microsemi Corporation Page 1 of 3 UPP9401e3 MECHANICAL and PACKAGING • • • • • • • CASE: Void-free transfer molded thermosetting epoxy compound meeting UL94V-0. TERMINALS: Tin/lead or RoHS compliant annealed matte-tin over copper. Readily solderable per MIL-STD-750, method 2026. MARKING: P01• (dot indicates “e3” designation). POLARITY: Cathode connected to TAB 2. TAPE & REEL option: 16 mm tape per standard EIA-481-B. Consult factory for quantities. WEIGHT: Approximately 0.016 gram. See Package Dimensions on last page. PART NOMENCLATURE UPP 9401 (e3) Powermite PIN diode RoHS Compliance e3 = RoHS compliant Blank = non-RoHS compliant Series Number SYMBOLS & DEFINITIONS Definition Symbol f IR IF Frequency Reverse current Forward current ELECTRICAL CHARACTERISTICS @ T A = +25ºC unless otherwise noted SERIES RESISTANCE RS CAPACITANCE CT PARALLEL RESISTANCE RP CARRIER LIFETIME τ TRANSMIT HARMONIC DISTORTION @ f = 100 MHz I F =50 mA @ f = 100 MHz VR = 0 V @ f = 100 MHz V=0V @ I F = 10 mA @ Pin = 50 W f = 50 MHz I F = 50 mA pF Ohms MIN TYP µS MIN TYP -dB MIN 5K 1.0 2.0 80 Ohms TYP MAX TYP MAX 0.75 0.75 1.0 1.0 RF01105, Rev. 1 (1/10/13) 10K ©2013 Microsemi Corporation RECEIVE 3rd ORDER HARMONIC DISTORTION @ f = 100 MHz V=0V f 1 = 50 MHz f 2 = 51 MHz VOLTAGE RATING VR FORWARD VOLTAGE VF @ I R = 10 µA @ I F = 50 mA -dB MIN Volts MIN Volts MAX 60 50 1.0 Page 2 of 3 UPP9401e3 PACKAGE and MOUNTING PAD DIMENSIONS DIMENSIONS in inches RF01105, Rev. 1 (1/10/13) ©2013 Microsemi Corporation Page 3 of 3