VSC8492YJD-13

VSC8492 Dual Channel Universal 10G PHY with OTN/FEC and 1588v2/Y.1731 Microsemi’s multichannel universal 10G PHY with OTN/FEC device provides highly flexible XAUI/SFI-4.2/TFI-5 to XFI transceiver capability with optional OTN wrapper for 10 GbE, 8G/10G Fibre Channel, OC-192/STM-64, and OTU2 applications. The Microsemi VSC8492 dual Universal 10G PHYs with OTN-FEC are ideal for Carrier Ethernet switch/router and DWDM systems. Cost-efficient transponders based on the VSC8492 device cater to high volume 10 GbE/10G SONET/SDH and 8G/10G Fibre Channel. The VSC8492 device offers the ideal solution for multiport client and network interfaces on telecom transport linecards, transponders, and muxponders. This highly integrated device supports 10 GbE LAN Carrier Ethernet networks, as well as WAN and OTN networks, with an extensive suite of 10 GbE mapping modes. With its 10G PHY XFI/SFI interfaces and G.709 FEC features, the VSC8492 dual device provides a seamless and direct interface to XFP and SFP+ optical modules. The Microsemi VSC8492 dual device employs a bidirectional, independent channel architecture that can be used in both transponder (adaptation) and regenerator modes. Bidirectional performance monitoring is supported in both cases. The OTN mapper with FEC supports performance monitoring and maintenance features defined by the ITU-T G.709 standard, independent of the client signal carried, to simplify the operation of optical networks supporting various client signals. Highlights • Universal 10G PHY SerDes/CDR transceiver • Integrated transponder support and XFI/ SFI SerDes/CDR with redundant ports for protection switching • 10 GbE LAN/WAN with SyncE and 1588v2 timestamp correction • Integrated UPI switch with G.709 OTN/FEC and GFP wrapper • Flexible 10 GbE XAUI/LAN/WAN mapping to OTU2 and overclocked OTU1e/2e Applications • N x 10G transponder/regenerator • Protected N x 10G muxponder/ROADM • Transponder/muxponder pizza box • Ethernet or IP/MPLS switches/routers • MSPP/MSTP N x 10G line cards The VSC8492 dual device includes two 10 Gbps dual-mode bidirectional UPI client interfaces and two 10 Gbps bidirectional serial interfaces for direct connection to XFP or SFP+ optics modules or 10G serial backplanes. The Microsemi-defined Universal PHY Interface (UPI) delivers 10 GbE and 10 GFC as four-lane XAUI, 10G SONET/SDH as four TFI-5-like serial lanes, and OTU2/ODU2 as four-lane SFI4.2-like interface. UPI also supports twice-rate XAUI (DDR XAUI or RXAUI) as two lanes operating at 6.25 Gbps, and twice-rate SFI-4.2 for OTU2/ODU2. Transponder/Regenerator (dual channel) Client: 2× 10 GE LAN/WAN 8GFC, 10GFC OC-192/STM-64 OTU2/1e/2e Network Module Module 2× XFI SFI 2× VSC8492 XFI 2× 10G OTN/FEC/PHY SFI Module Module 2× 10 GE LAN/WAN 8GFC, 10GFC OC-192/STM-64 OTU2/1e/2e Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. VSC8492 Dual Channel Universal 10G PHY with OTN/FEC and 1588v2/Y.1731 Key Benefits Key Specifications • Enables universal line cards supporting 10 GbE LAN/WAN, 8 GFC, 10 GFC, OC-192/STM-64, and G.709 OTU2/1e/2e • Lowest cost, power, and size for N x 10G line cards, as well as single-chip transponder/regenerator • Direct connect to XFP and SFP+ client and network optics • Direct connect to high-speed backplanes, MACs, SONET/SDH and G.709 OTN framers, and FPGAs using four-lane serial interface compatible with XAUI/RXAUI (10 GbE, 10 GFC), TFI-5 (SONET/SDH) and SFI-4.2 (OTU2) • Wraps 10 GbE LAN/WAN, OC-192/STM-64, 8 GFC and 10 GFC clients in G.709 OTU2 with either standard or enhanced FEC • May be configured to accept any 10G serial client, monitor and wrap it in G.709 OTN, and deliver it to UPI for connection to OTN switch, backplane, or other device • Supports full-rate 10 GbE LAN transport using over-clocked OTU2e/1e (with or without fixed stuff), as well as GFP-mapping with or without preamble and ordered set retention (G.709 and G.Sup43) • Supports 1+1 and 1:1 host interface protection switching • Supports loopbacks toward both client and network interfaces • Universal PHY Support: 10 GbE LAN/WAN, OC-192/ STM-64,10 GFC, OTU2/1e/2e 4-lane • 10 GbE/10 GFC XAUI/RXAUI, SONET/SDH TFI-5-compatible, OTU2 SFI-4.2-compatible • XFI/SFI SerDes/CDR with EDC, including multitap Tx pre-emphasis and adaptive DFE Rx • Redundant XFI/SFI serial interfaces connect directly to client or network XFP/SFP+ optics • 10G serial interfaces connect directly to 10GBASE-KR backplanes • OTN Mapper with RS(255,239) and G.975.1 eFECs • 484-pin 23 mm x 23 mm FCBGA • As low as 2.5 W per channel typical power dissipation 3/6G UPI 10-11G XFI 3/6G UPI 10-11G XFI FEC FEC CPU Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 email: sales.support@microsemi.com www.microsemi.com OTN OTN PCS PCS MAC MAC OH add/drop Related Products Visit www.microsemi.com for information about these related products: • Ethernet MACs and switches for Ethernet L2 aggregation and transport over 10 GbE LAN/WAN or OTN • EoS Mappers for Ethernet or multiservice aggregation and transport over SONET/SDH optionally mapped into OTU2 • Asynchronous crosspoint switches MAC MAC PCS PCS OTN OTN FEC FEC XFI 8-11G CMU Reference Clock XFI 8-11G Recovered clock Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for communications, defense and security, aerospace, and industrial markets. Products include high-performance and radiationhardened analog mixed-signal integrated circuits, FPGAs, SoCs, and ASICs; power management products; timing and synchronization devices and precise time solutions; voice processing devices; RF solutions; discrete components; enterprise storage and communications solutions, security technologies, and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees worldwide. Learn more at www.microsemi.com. ©2011–2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. VPPD-02753. 1.0. 4/16