885062

885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Applications • WiFi bandpass filter that enables the coexistence of 3G/4G/LTE/TD-LTE & WiFi signals • High-power WLAN Access Points and Small Cells • Band-edge filtering of WiFi signal emissions • Smart Meters and 2.4GHz ISM Applications • Set Top Box, Gateways and WiFi Routers CSP-5CT package: 1.4 x 1.2 x 0.46 mm Product Features Functional Block Diagram • Low Loss in WLAN band with extended upper corner for inclusion of Bluetooth • High Rejection in B38/B40 bands • Industry leading small size: 1.4 x 1.2 x 0.46 mm • Performance over -40 to +95 ºC • Ceramic chip-scale Package (CSP) • Hermetically sealed Pb • RoHS compliant, Pb-free Top View Input Gnd 5 4 Output 2 3 Gnd 1 Gnd General Description The 885062 is a high-performance, high power Bulk Acoustic Wave (BAW) band-pass filter with extremely steep skirts, simultaneously exhibiting low loss in the WiFi band and high band-edge & near-in rejection. The 885062 enables coexistence of WiFi and LTE signals within the same device or in close proximity to one another. Its unique power handling capability allows for implementation into access points, small cell base stations, and other high power ISM band applications. The 885062 uses common module packaging techniques to achieve the industry standard 1.4 x 1.2 x 0.46 mm footprint. The filter exhibits excellent power handling capabilities. Data Sheet: Rev G 02/10/15 © 2015 TriQuint Pin Configuration Pin No. Label 1 Input 4 Output 2,3,5 Ground Ordering Information Part No. Description 885062 885062-EVB Packaged part Evaluation board Standard T/R size = 15,000 units/reel - 1 of 8 - Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Absolute Maximum Ratings Parameter Rating (1) Storage Temperature (2) Operable Temperature -55 to +125 °C -40 to +95 °C MTTF Input Power + 28 dBm (3) +  70  °C +  85  °C +  95  °C > 14M hours > 5M hours > 2M hours 1. Operation of this device outside the parameter ranges given may cause permanent damage. 2. Specifications are not guaranteed over all operable conditions. 3. Input Power with WLAN OFDM signal applied. Electrical Specifications (1) Conditions unless otherwise noted: Device Temperature = -30°C to +85°C. Parameter (2) Insertion Loss (3) Amplitude Variation Input/Output VSWR (4) Impulse Response Length Attenuation nd 2 Harmonics rd 3 Harmonics Conditions Min 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 2402.5 – 2481.5 MHz (WiFi Ch.1-13) 2401 – 2483 MHz 100 – 2300 MHz (5) 2300 – 2365 MHz (5) 2365 – 2370 MHz (5) 2370 – 2375 MHz (+25 to +85˚C) (5) 2370 – 2375 MHz (-30 to +25˚C) (5) 2375 – 2380 MHz (+25 to +85˚C) (5) 2375 – 2380 MHz (-30 to +25˚C) (5) 2500 – 2505 MHz (+25 to +85˚C) (5) 2500 – 2505 MHz (-30 to +25˚C) (5) 2505 – 2570 MHz (+25 to +85˚C) (5) 2505 – 2570 MHz (-30 to +25˚C) (5) 2570 – 2620 MHz (5) 2620 – 2690 MHz 4800 – 5000 MHz 7200 – 7500 MHz CW Tone = 2442 MHz @ 22.5 dBm CW Tone = 2442 MHz @ 22.5 dBm - - 35 48 54 45 56 25 34 29 20 49 38 45 44 38 36 - Typ (+25°C) Max 1.7 1.5 1.5 1.6 1.7 0.8 0.8 0.9 0.4 0.6 1.9 160 37 53 58 61 61 49 49 41 41 55 55 48 46 43 40 60 138 2.2 2.0 1.9 2.1 2.2 1.5 1.1 1.1 1.0 1.8 2.2 200 - Units dB dB ns dB dB dB - dB - dB - dB - dB - dB dB dB dB dBc dBc Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature. 4. Duration in ns between the maxima and the point 40 dB below the maxima. 5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature. 6. An external impedance matching network with ±2 % tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev G 02/10/15 © 2015 TriQuint - 2 of 8 - Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Electrical Specifications (1) Conditions unless otherwise noted: Device Temperature = -40°C to +95°C. Parameter (2) Insertion Loss (3) Amplitude Variation Input/Output VSWR (4) Impulse Response Length Attenuation nd 2 Harmonics rd 3 Harmonics Conditions Min 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 2402.5 – 2481.5 MHz (WiFi Ch.1-13) 2401 – 2483 MHz 100 – 2300 MHz (5) 2300 – 2365 MHz (5) 2365 – 2370 MHz (5) 2370 – 2375 MHz (+25 to +95˚C) (5) 2370 – 2375 MHz (-40 to +25˚C) (5) 2375 – 2380 MHz (+25 to +95˚C) (5) 2375 – 2380 MHz (-40 to +25˚C) (5) 2500 – 2505 MHz (+25 to +95˚C) (5) 2500 – 2505 MHz (-40 to +25˚C) (5) 2505 – 2570 MHz (+25 to +95˚C) (5) 2505 – 2570 MHz (-40 to +25˚C) (5) 2570 – 2620 MHz (5) 2620 – 2690 MHz 4800 – 5000 MHz 7200 – 7500 MHz CW Tone = 2442 MHz @ 22.5 dBm CW Tone = 2442 MHz @ 22.5 dBm - - 35 48 54 43 56 23 34 29 18 49 35 45 44 38 36 - Typ (+25°C) Max 1.7 1.5 1.5 1.6 1.7 0.8 0.8 0.9 0.4 0.6 1.9 160 37 53 58 61 61 49 49 41 41 55 55 48 46 43 40 60 138 2.2 2.0 2.1 2.2 2.4 1.8 1.1 1.1 1.0 1.8 2.2 200 - Units dB dB ns dB dB dB - dB - dB - dB - dB - dB dB dB dB dBc dBc Notes: 1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 3. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature. 4. Duration in ns between the maxima and the point 40 dB below the maxima. 5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature. 6. An external impedance matching network with ±2 % tolerance will be necessary to achieve the stated specifications. 7. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev G 02/10/15 © 2015 TriQuint - 3 of 8 - Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Electrical Specifications (1) Conditions unless otherwise noted: Device Temperature = 0°C to +70°C. Parameter (2) Insertion Loss (3) Amplitude Variation Input/Output VSWR (4) Impulse Response Length Attenuation nd 2 Harmonics rd 3 Harmonics Notes: 1. 2. 3. 4. 5. 6. 7. Conditions Min 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 2402.5 – 2421.5 MHz (WiFi Ch.1) 2407.5 – 2426.5 MHz (WiFi Ch.2) 2412.5 – 2471.5 MHz (WiFi Ch.3-11) 2457.5 – 2476.5 MHz (WiFi Ch.12) 2462.5 – 2481.5 MHz (WiFi Ch.13) 2402.5 – 2481.5 MHz (WiFi Ch.1-13) 2401 – 2483 MHz 100 – 2300 MHz (5) 2300 – 2365 MHz (5) 2365 – 2370 MHz (5) 2370 – 2375 MHz (+25 to +70˚C) (5) 2370 – 2375 MHz (0 to +25˚C) (5) 2375 – 2380 MHz (+25 to +70˚C) (5) 2375 – 2380 MHz (0 to +25˚C) (5) 2500 – 2505 MHz (+25 to +70˚C) (5) 2500 – 2505 MHz (0 to +25˚C) (5) 2505 – 2570 MHz (+25 to +70˚C) (5) 2505 – 2570 MHz (0 to +25˚C) (5) 2570 – 2620 MHz (5) 2620 – 2690 MHz 4800 – 5000 MHz 7200 – 7500 MHz CW Tone = 2442 MHz @ 22.5 dBm CW Tone = 2442 MHz @ 22.5 dBm - - 35 48 54 46 56 27 34 29 26 49 40 45 44 38 36 - Typ (+25°C) Max 1.7 1.5 1.5 1.6 1.7 0.8 0.8 0.9 0.4 0.6 1.9 160 37 53 58 61 61 49 49 41 41 55 55 48 46 43 40 60 138 2.2 2.0 1.9 2.1 2.2 1.5 1.1 1.1 1.0 1.6 2.2 200 - Units dB dB ns dB dB dB - dB - dB - dB - dB - dB dB dB dB dBc dBc In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature. Duration in ns between the maxima and the point 40 dB below the maxima. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature. An external impedance matching network with ±2 % tolerance will be necessary to achieve the stated specifications. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev G 02/10/15 © 2015 TriQuint - 4 of 8 - Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Evaluation Board Notes: 1. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in end user product circuits depending on component manufacturer and PCB material. 2. PCB: .500 x.500 x .062; Construction: ½ oz Cu Top Layer; TLY-5A (.0075) ½ oz Cu Middle Layer, FR4; ½ oz Cu Bottom Layer. (dimensions are in inches) Bill of Material Reference Des. Value Description L1 L2 SMA PCB 9.1 nH 6.8 nH N/A N/A Chip Inductor, 0201, +/- 2 % Chip Inductor, 0201, +/- 2 % SMA connector 3-layer Data Sheet: Rev G 02/10/15 © 2015 TriQuint Manuf. - 5 of 8 - Murata Murata Radiall USA Multiple Part Number LQP03TN9N1J02 LQP03TN6N8J02 9602-1111-018 960999 Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Performance Plots Test conditions unless otherwise noted: Temp= +25°C Passband Response Frequency Response 0 0 -10 -2 -20 d B -30 d B -40 -50 -4 -6 -60 -70 2200 2325 2450 2575 -8 2363 2700 2402.5 2442 2481.5 2521 Frequency (MHz) Frequency (MHz) Wideband Response L i n 0 -10 Input / Output VSWR 3 2.5 2 M a g -20 d B -30 L i n -40 -50 1.5 1 2363 2402.5 2442 2481.5 2521 2442 2481.5 2521 3 2.5 2 -60 -70 20 1915 3810 5705 7600 M a g 1.5 1 2363 2402.5 Frequency (MHz) Frequency (MHz) Output Smith Chart Input Smith Chart 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 0 -1 -0 .5 0 0.5 -1 1 0 0.5 1 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 Data Sheet: Rev G 02/10/15 © 2015 TriQuint -0 .5 - 6 of 8 - Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Package Information, Marking and Dimensions Marking code MFG site Date code 94 M ID dot WWY Package Style: CSP-5CT Dimensions: 1.4 x 1.2 x 0.46 mm Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0 μm, over a 2-6 μm Ni plating. All tolerances are ±0.15 mm except overall length and width ±0.10 mm. 0.46 NOM. 0.50 MAX. 1.40 The date code consists of: WW = 2 digit week, Y = last digit of year, M = manufacturing site code. 1.25 0.50 1.20 0.325 0.25 0.90 Notes: 1. All dimensions shown are typical in millimeters. 2. An asterisk (*) in front of the marking code indicates prototype. 0.25 PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Tape and Reel information Standard T/R size=10,000 units/reel. All dimensions are in millimeters. Data Sheet: Rev G 02/10/15 © 2015 TriQuint - 7 of 8 - Disclaimer: Subject to change without notice 885062 2.4 GHz WLAN/BT LTE Co-Existence Filter Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with the latest version of J-STD-020, lead free solder, 260°C Caution! ESD-Sensitive Device Refer to Soldering guidelines. ESD Rating: Value: Test: Standard: Class 1B 800 V Human Body Model (HBM) ESDA/JEDEC JS-001-2012 ESD Rating: Value: Test: Standard: 350 V 350 V Machine Model (MM) JEDEC Standard JESD22-A115 Profile for recommended RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: • Halogen Free (Chlorine, Bromine) • Antimony Free • TBBP-A (C15H12Br402) Free • PFOS Free • SVHC Free MSL Rating Not applicable. Hermetic package. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev G 02/10/15 © 2015 TriQuint - 8 of 8 - Disclaimer: Subject to change without notice