QPQ1281SR

QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Product Overview The QPQ1281 is a high performance Bulk Acoustic Wave (BAW) filter designed to meet the strict LTE rejection requirements for use in B40, Sub-Band 2300-2370 MHz QPQ1281 is specifically designed to meet the high performance expectations of insertion loss and rejection for LTE TDD systems under all operating conditions. The QPQ1281 uses common module packaging techniques to achieve the industry standard 2.0 x 1.6 x 0.73 mm footprint. 1 A 2 3 Key Features • Highly selective BAW filter achieving low insertion loss over full bandwidth and operating conditions • Performance -20 to +90 °C • Excellent Wi-Fi rejection • Single-ended operation • High Power Handling Compatible for Small Cells • Small Size • RoHS compliant, Pb-free Functional Block Diagram RF In 3 Pin 2.0 x 1.6 x 0.73 mm leadless SMT Package RF Out Applications Top View • For Band 40 TD-LTE applications • 2300 – 2370 MHz Sub-Band • For Small Cell Base Stations TOPxRAY PINS VIEW Pin Configuration Pin No. Label Function 1 RF In RF Input 2 RF Out RF Output 3 TQQ6421 Ground 01 UNIT, 01.60mm X 02.00mm, 7 LAYER, 0.40mm MOLD CAP, 1:1 Datasheet January 9, 2018 | Subject to change without notice A3H TOPxRAY TOPxRAY PINS Ordering Information 1 of 9 Part No. Description QPQ1281SR 100 pieces on a 7” reel QPQ1281TR7 2,500 pieces on a 7” reel (standard) QPQ1281EVB Evaluation Board www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Absolute Maximum Ratings Life Test Parameter Rating Storage Temperature (1) −40 to +125°C Operation Temperature (2) −40 to +95 °C Conditions Rating +29 dBm DL, +85°C LTE, 5MHz 16QAM, PAR =8dB > 87,600 hours Electrical specifications are measured at specified test conditions. Notes: 1. Operation of this device outside the parameter ranges given above may cause permanent damage. 2. Device will function over the recommended range without degradation in reliability but is not guaranteed to meet electrical specifications. Electrical Specifications (1) Parameter Conditions Passband Insertion Loss Amplitude Variation (2) Group Delay Variation (3) Phase Ripple (3) VSWR Return Loss Typ (4) Max  Units 2300 – 2370 MHz – 1.9 3.2 dB – 1.0 1.7 dB – 12 25 ns Min Input / Output – 28 55  °p-p – 1.5:1 2:1 – 9.5 14 – dB  –  –  –  – –  –  – – – – – – – – dB Attenuation (5) 10–960 MHz 961–1709 MHz 1710–1880 MHz 1920–2170 MHz 2110–2170 MHz 2171–2280 MHz 2393–2400 MHz 2400–2440 MHz 2440–2480 MHz 2480–2500 MHz 2500–3660 MHz 3750–4900 MHz 4901–6000 MHz 6001–8000 MHz 35 30 29 29 29 10 10 42 37 35 31 35 27 31 45 33 32 32 32 23 17 47 40 38 34 38 30 35 2nd Harmonic Pin = +29 dBm 65 86 Input / Output – 50 Impedance (6) dBc –  Notes: Test conditions unless otherwise noted: Temp= -20 to +90°C 1. All specifications are based on the Qorvo schematic for the main reference design. 2. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within define frequency points. 3. This is defined as the worst difference between a peak and adjacent valley within defined frequency points. 4. Typical values are based on average measurements of 20 devices at a temperature of +25°C 5. Attenuation is referenced to zero dB 6. This is the optimum impedance in order to achieve the performance shown. Datasheet January 9, 2018 | Subject to change without notice 2 of 9 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® QPQ1281EVB Evaluation Board 3 2 1 50 50 Notes: 1. Top, middle & bottom layers: 1/2 oz copper, Substrates: FR4 dielectric, 0.062” thick, Finish plating: Nickel: 3-8 µm thick, Gold: 0.03-0.2 µm thick, Hole plating: Copper min 0.0008 µm thick Bill of Material –  QPQ1281EVB Reference Des. U1 SMA PCB Value n/a n/a n/a Description Manuf. Part Number Band 40 BAW Filter Qorvo QPQ1281 SMA Edge Connector Radiall USA Inc. 9602-1111-018 3-Layer Qorvo 960568 Datasheet January 9, 2018 | Subject to change without notice 3 of 9 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Performance Plots Frequency Response 0 Passband Response -0.2 -1.2 -20 -2.2 -40 d B d B -60 -3.2 -4.2 -80 -5.2 -100 2085 2210 2335 2460 -6.2 2265 2585 2300 Frequency (MHz) Wideband Response 0 2335 2370 2405 Frequency (MHz) Input / Output Return Loss 0 d B -20 -9.5 -19 -28.5 d B -40 -38 2265 2300 2335 2370 2405 2335 2370 2405 0 -60 d B -80 -9.5 -19 -28.5 -100 10 2007.5 4005 6002.5 -38 2265 8000 2300 Frequency (MHz) Frequency (MHz) Input Smith Chart Output Smith Chart 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 -1 -0 .5 0 0 0.5 1 -1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 Datasheet January 9, 2018 | Subject to change without notice 4 of 9 0.5 1 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Package Marking and Dimensions Marking 4-digit Part Number: 1281 4-digit Trace Code: XXXX 1281 XXXX Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M-1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. Datasheet January 9, 2018 | Subject to change without notice 5 of 9 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® PCB Mounting Pattern Notes: 1. 2. 3. All dimensions are in millimeters. Angles are in degrees. Use 1 oz. coper minimum for top and bottom layer metal. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Datasheet January 9, 2018 | Subject to change without notice 6 of 9 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Tape and Reel Information – Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2500 pieces on a 7” reel. Feature Cavity Centerline Distance Measure Symbol Size (in) Size (mm) Length A0 0.077 1.95 Width B0 0.093 2.35 Depth K0 0.045 1.15 Pitch P1 0.157 4.00 Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.138 3.50 Cover Tape Width C 0.213 5.40 Carrier Tape Width W 0.315 8.00 Datasheet January 9, 2018 | Subject to change without notice 7 of 9 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Tape and Reel Information – Reel Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2,500 pieces on a 7” reel. Feature Flange Hub Measure Symbol Size (in) Size (mm) Diameter A 6.969 177.0 Thickness W2 0.559 14.2 Space Between Flange W1 0.346 8.8 Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0 Datasheet January 9, 2018 | Subject to change without notice 8 of 9 www.qorvo.com QPQ1281 TDD B40 Band Pass Filter – 70MHz ® Handling Precautions Parameter Rating Standard ESD – Human Body Model (HBM) Class 3B ESDA / JEDEC JS-001-2012 ESD – Charged Device Model (CDM) Class C3 ESDA / JEDEC JS-002-2014 MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Caution! ESD-Sensitive Device Solderability Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes. Solder profiles available upon request. Contact plating: ENIG (Electroless Nickel Immersion Gold) RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes: • Lead Free • Halogen Free (Chlorine, Bromine) • • • • Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Datasheet January 9, 2018 | Subject to change without notice 9 of 9 www.qorvo.com