RFFM6204TR7

RFMD + TriQuint = Qorvo RFFM6204 RFFM6204 2.0V to 4.0V, 2.4GHz Front End Module The RFFM6204 is a complete integrated solution in a single Front End Module (FEM) for Zigbee® applications in the 2.4GHz to 2.5GHz band. The ultra-small factor and integrated matching minimizes layout area in the customer's application and greatly reduces the number of external components. This simplifies the total front end solution by reducing the bill of materials, system footprint, and manufacturing cost. The FEM integrates a power amplifier (PA) plus harmonic filter in the transmit (TX) path, a low noise amplifier (LNA) in the receive (RX) path, and a low loss bidirectional through mode path. The RFFM6204 incorporates two single-pole triple-throw (SP3T) switches to provide a single balanced TDD access and a single antenna port for TX, RX, and through mode paths. The device is provided in a 2.5mm x 2.5mm x 0.5mm, 16-pin QFN package. C_RX C_BYP C_EN VDD_TX 16 15 14 13 1 CT 2 RFN 3 PA BALUN RFP 12 GND 11 ANT 10 GND 9 N/C LNA 4 6 7 ■ Tx Output Power = 13dBm ■ Integrated RF Front End Module with Rx/Tx Balun, PA, Filter, LNA, Bidirectional Thru path and 2-SP3T Switches ■ Single Bidirectional Differential Transceiver Interface. ■ Voltage Range = 2.0V to 4.0V ■ Rx Noise Figure = 2.5dB ■ ZigBee® 802.15.4 Based Systems for Remote Monitoring and Control ■ AA Battery Operation ■ 2.4GHz ISM Band Applications ■ Smart Meters for Energy Management GND VDD_RX GND 8 N/C 5 Features Applications Control Logic C_TX Package: QFN, 16-pin, 2.5mm x 2.5mm x 0.5mm Functional Block Diagram Ordering Information RFFM6204SB Standard 5 piece bag RFFM6204SQ Standard 25 piece bag RFFM6204SR Standard 100 piece reel RFFM6204TR7 Standard 2500 piece reel RFFM6204PCK-410 Fully assembled evaluation board w/5 pc bag Revision DS20150720 © 2015 RF Micro Devices, Inc. 1 of 9 Disclaimer: Subject to change without notice www.rfmd.com / www.qorvo.com RFFM6204 RFMD + TriQuint = Qorvo Absolute Maximum Ratings Parameter Rating Unit 4.5 V Operating Temperature -40 to +125 °C Storage Temperature -40 to +150 °C Maximum Input Power to PA +20 dBm Maximum Input Power to LNA +5 dBm ESD, HBM 1000 V ESD, CDM 1000 V Voltage Moisture Sensitivity MSL 2 Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and