TQP4M0008

TQP4M0008 Low Loss Reflective SPDT Switch ® Product Overview The TQP4M0008 is a GaAs FET single-pole, double throw (SPDT) low loss reflective switch with good isolation. The TQP4M0008 may be operated DC control signals from +1.8 to +5 Volts. The TQP4M0008 has 100 – 6000 MHz broadband performance. The TQP4M0008 is packaged in a RoHS-compliant, compact 6-pin 2 x 2 mm surface-mount leadless package. The TQP4M0008 is an ideal choice for wireless infrastructure and test & measurement applications requiring low insertion loss and high input IP3. It can also be used for any general purpose of RF application. Functional Block Diagram 6-Pin 2 x 2 mm DFN Package Key Features • • • • • • General Purpose Broadband: 100 – 6000 MHz Low Insertion Loss: 0.3 dB at 1 GHz High Input IP3: +56 dBm at 1 GHz CMOS Compatible Dual Voltage Control Lead Free, RoHS Compliant SMT Package Pin 1 Reference Mark RF2 1 6 V2 GND 2 5 RFC RF1 3 4 V1 Backside Paddle - RF/DC GND Top View Applications • • • • • • • WLAN Cellular Infrastructure Test and Measurement Smart Energy UHF/VHF LMR General Purpose Broadband Wireless Pin Configuration Pin No. Symbol 1 2 3 4 5 6 Backside Paddle RF2 GND RF1 V1 RFC V2 RF/DC GND Datasheet June 15, 2018 | Subject to change without notice Ordering Information 1 of 7 Part No. Description TQP4M0008 2,500 pieces on a 7” reel (standard) TQP4M0008-PCB 0.1 – 6 GHz Evaluation Board www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch ® Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating −65 to +150 °C Storage Temperature Parameter Min Typ Max Units V1, V2 High State +1.8 +3.3 +5.0 V −40 +95 °C RF Input Power, CW, 50 Ω, T=25 °C +33 dBm Operating Temperature Max RF Input Power, peak envelope +37 dBm Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Control Voltage (V1, V2) +6 V Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Electrical Specifications Conditions (1) Parameter Min Operational Frequency Range Insertion Loss Isolation Return Loss, RFC Port Input P1dB (2) Input IP3 Control Pin Current MHz 0.75 1.0 – 2.5 GHz 0.45 0.90 2.5 – 3.0 GHz 0.55 0.95 3.0 – 4.5 GHz 0.65 4.5 – 6.0 GHz 0.85 0.1 – 1.0 GHz 20 30 1.0 – 2.5 GHz 18 25 2.5 – 3.0 GHz 16 22 dB dB 3.0 – 4.5 GHz 20 4.5 – 6.0 GHz 17 0.1 – 1.0 GHz 20 1.0 – 2.5 GHz 15 2.5 – 3.0 GHz 15 3.0 – 4.5 GHz 17 4.5 – 6.0 GHz 15 At 1 GHz 37 dBm 56 dBm 110 ns 45 Logic Low 0 Logic High 1.8 V1 or V2 at +5V dB 180 tOFF,tON (50% CTL to 2/98% RF) Digital Control Voltage (V1, V2) (2) Units 0.35 tOFF,tON (50% CTL to 10/90% RF) Switch Time Max 6000 0.1 – 1.0 GHz Pout = +15 dBm/tone, at 1 GHz, ∆f = 1 MHz (2) Typ 100 ns 0.45 3.3 V 5.0 V 60 μA Notes: 1. Test conditions unless otherwise noted: V1 = +3.0 V, V2 = 0 V, Temp = +25 °C, 50 Ω system. 2. Specified IP3 and P1dB at V1 or V2 ≥ +3.3V Switch Control Truth Table Control Voltages Signal Path State V1 V2 RFC to RF1 RFC to RF2 Low High Off (isolation) On (Insertion Loss) High Low On (Insertion Loss) Off (isolation) Datasheet June 15, 2018 | Subject to change without notice 2 of 7 www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch ® J1 TQP4M0008-PCB Evaluation Board J6 GND J1 J5 J6 J5 C1 U1 100 pF C2 RF2 J2 J2 J3 C3 U1 C1 RF1 C2 1 6 2 5 3 J3 RFC 100 pF J4 V1 Backside Paddle C4 J7 RF Input J8 C5 C4 C3 4 100 pF J4 J7 V2 100 pF C5 100 pF J8 RF Output PCB Loss Calibration Line Notes: 1. J7 to J8 thru line may be used to de-embed PCB losses to device. Qorvo PCB 1094172 Material and Stack-up 0.014" 0.062" ± 0.006" Finished Board Thickness Nelco N-4000-13 εr=3.7 typ. 1 oz. Cu top layer 1 oz. Cu inner layer Core 1 oz. Cu inner layer 0.014" Nelco N-4000-13 1 oz. Cu bottom layer 50 ohm line dimensions: Width = .021” Spacing = .006” Typical Performance − TQP4M0008-PCB Test conditions unless otherwise noted: V1=+3 V, V2=0 V, Temp=25°C, 50 Ω system Parameter Units Typical Value Frequency Insertion Loss (1) RFC Port Return Loss RFC to RF1/RF2 Isolation RF1 to RF2 Isolation 1 0.3 19 32 33 2 0.4 15 26 26 3 0.45 14 24 25 GHz dB dB dB dB Input P1dB Input IP3 (f=1 GHz, 1 MHz tone spacing, Pout=+15 dBm/tone) +36 +54 +35.5 +57 +35 +59 dBm dBm Notes: 1. Insertion Loss values reflect de-embedding of evaluation board RF line and DC blocking capacitor losses. Datasheet June 15, 2018 | Subject to change without notice 3 of 7 www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch ® Performance Plots − TQP4M0008-PCB Test conditions unless otherwise noted: V1=+3 V, V2=0 V, Temp=+25°C, 50 Ω system Insertion Loss vs. Frequency 0.5 Temp.=+25°C Temp.=+25°C RFC to RF1 or RF2 -5 0 -10 |S11| (dB) |S21| (dB) RFC Port Return Loss 0 -0.5 -15 -20 -25 -1 -30 -1.5 -35 0 1 2 3 4 5 6 0 1 2 Frequency (GHz) IIP3 vs. Frequency 65 3 4 5 6 Frequency (GHz) P1dB vs. Frequency 50 1 MHz tone spacing Pout=+15 dBm/tone Temp.=+25°C Temp.=+25°C 45 P1dB (dBm) IIP3 (dBm) 60 55 40 35 30 50 25 45 20 0 0.5 1 1.5 2 2.5 3 3.5 0 0.5 1 1.5 Frequency (GHz RFC to RF1/RF2 Isolation vs. Frequency 0 2 2.5 3.5 RF1 to RF2 Isolation vs. Frequency 0 Temp.=+25°C Temp.=+25°C -10 -10 -20 -20 |S21| (dB) |S21| (dB) 3 Frequency (GHz) -30 -30 -40 -40 -50 -50 -60 -60 0 1 2 3 4 5 6 0 Frequency (GHz) Datasheet June 15, 2018 | Subject to change without notice 1 2 3 4 5 6 Frequency (GHz) 4 of 7 www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch ® Pin Configuration and Description Pin 1 Reference Mark RF2 1 6 V2 GND 2 5 RFC RF1 3 4 V1 Backside Paddle - RF/DC GND Pin No. Symbol 1 2 3 4 5 RF2 GND RF1 V1 RFC 6 V2 Backside Paddle RF/DC GND Datasheet June 15, 2018 | Subject to change without notice Description RF output 2, DC voltage present, DC block required. RF/DC Ground RF output 1, DC voltage present, DC block required. Control Voltage Antenna Input, DC voltage present, DC block required. Control Voltage RF/DC Ground. Use recommended via hole pattern and ensure good solder attach for best thermal and electrical performance. 5 of 7 www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch ® Mechanical Information Package Marking and Dimensions Marking: Part number – 0008 Trace code – XXXX (Up to 4 characters assigned by subcontractor) 0.600±0.050 Exp.DAP 2.000±0.050 PIN #1 IDENTIFICATION CHAMFER 0.300X45° 0.2030 Ref. PIN #1 IDENTIFICATION 0008 2.000±0.050 0.5000 Bsc 1.600±0.050 Exp.DAP XXXX 0.3000±0.050 0.000-0.0500 0.2500±0.050 TOP VIEW 0.8500±0.050 BOTTOM VIEW SIDE VIEW Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M-1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012 PCB Mounting Pattern 0.35 Ø.254 (.010) PLATED THRU VIA HOLES 1.60 0.70 0.50 PITCH, TYP 8X 0.30 0.64 PACKAGE OUTLINE 3 3X 2X 0.20 8X 0.67 Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Use 1 oz. copper minimum for top and bottom layer metal. 3. We recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.010”). 4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance. Datasheet June 15, 2018 | Subject to change without notice 6 of 7 www.qorvo.com TQP4M0008 Low Loss Reflective SPDT Switch ® Handling Precautions Parameter Rating Standard ESD – Human Body Model (HBM) Class 1B ESDA / JEDEC JS-001-2012 ESD – Charged Device Model (CDM) Class C3 JEDEC JESD22-C101F MSL – Moisture Sensitivity Level Level 1 IPC/JEDEC J-STD-020 Caution! ESD-Sensitive Device Solderability Compatible with both lead-free (260°C max. reflow temp.) and tin/lead (245°C max. reflow temp.) soldering processes. Solder profiles available upon request. Contact plating: NiPdAu RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes: • Lead Free • Halogen Free (Chlorine, Bromine) • • • • Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2018 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Datasheet June 15, 2018 | Subject to change without notice 7 of 7 www.qorvo.com