AQ432BY-C3-12-TRL

AQ432 1.24V Shunt Ref/Amplifier TO-92, SOT23, SC70 Package Product Specification Revision 1.0 May 15, 2007 General Description The AQ432 is a low voltage reference/ amplifier suited for the control loop of low voltage power supplies. Functionally similar to the ubiquitous TL431, the AQ432 has a lower 1.24V reference and a much wider range of operating currents. Particular care was taken in the design to minimize overshoot at startup and to allow wide AC bandwidth. Unlike other 1.24V reference/amplifiers, the AQ432 is designed to be stable under all conditions and does not suffer from the common overshoot issued associated with other parts low voltage parts Applications • • • • Power supply control loop Low TC low voltage reference Power management applications Direct replacement for AP432, AS432, SPX432, TLV431, and LMV431 Features • • • • Low voltage reference: 1.24V 40 uA to 100 mA operation Low TC voltage reference Improved AC, DC performance compared to 1.24V part types • Offered in ultra small SC70 package • RoHS compliant Pin Configuration Pin Descriptions Pin Name CATH REF ANODE Function Output and supply terminal, must be greater than 1.2V for normal operation Input, nominally 1.24V in normal operation. Ground and Substrate www.acutechnology.com AQ432 Acutechnology Semiconductor Inc. AQ432 Ordering Information Device AQ432 AQ432 AQ432 AQ432 AQ432 Operating Tj -40C˚ ≤ 105C˚ -40C˚ ≤ 105C˚ -40C˚ ≤ 105C˚ -40C˚ ≤ 105C˚ -40C˚ ≤ 105C˚ %Tol 1.0 0.5 1.0 0.5 1.0 PKG Type TO-92-3 SOT-23-3 SOT-23-3 SOT-23-3 SC70-3 VOUT 1.24V 1.24V 1.24V 1.24V 1.24V 1.24V Wrap T&R T&R T&R T&R T&R T&R Ordering Number AQ432BY-N3-12-TRL AQ432BZ-N3-12-TRL AQ432BYM3-12-TRL AQ432BZM3-12-TRL AQ432BY-C3-12-TRL AQ432BZ-C3-12-TRL AQ432 -40C˚ ≤ 105C˚ 0.5 SC70-3 Note: The TRL parts are Lead Free and RoHS compliant. Absolute Maximum Ratings Stress greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These stress ratings only, and functional operation of the device at these or any conditions beyond those indicated under recommended Operating Conditions is not implied. Exposure to “Absolute Maximum Rating” for extended periods may affect device reliability. Use of standard ESD handling precautions is required. Parameter CATH Voltage REF Current CATH, ANODE Currents Operating Junction Temperature Lead Temperature (soldering 10 seconds) Storage Temperature Range Value 18 3 150 150 260 -65 to +150 Units V mA mA ºC ºC ºC Electrical Specifications Electrical characteristics are guaranteed over the full temperature range –40ºC