105711-HMC347LP3

HMC347LP3 / 347LP3E v06.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz Typical Applications Features The HMC347LP3 / HMC347LP3E is ideal for: High Isolation: >50 dB up to 3 GHz >45 dB up to 10 GHz • Basestation Infrastructure • Fiber Optics & Broadband Telecom Low Insertion Loss: 1.6 dB @ 10 GHz • Microwave Radio & VSAT Non-Reflective Design • Military Radios, Radar, & ECM 3x3 mm QFN SMT Package • Test Instrumentation General Description Functional Diagram The HMC347LP3 & HMC347LP3E are broadband high isolation non-reflective GaAs MESFET SPDT switches in low cost leadless QFN surface mount plastic packages. Covering DC to 14 GHz, the switch offers high isolation and low insertion loss. The switch features >50 dB isolation up to 3 GHz and >40 dB isolation up to 13 GHz. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. This SPDT is an excellent alternative to the HMC132C8 SPDT. SWITCHES - SMT 10 Electrical Specifi cations, TA = +25° C, With 0/-5V Control, 50 Ohm System Parameter Frequency Typ. Max. Units 1.5 1.6 1.6 1.9 1.9 2.0 2.1 2.4 dB dB dB dB Insertion Loss DC - 3.0 GHz DC - 6.0 GHz DC - 12.0 GHz DC - 14.0 GHz Isolation DC - 3.0 GHz DC - 6.0 GHz DC - 12.0 GHz DC - 14.0 GHz 49 41 39 33 53 46 44 38 dB dB dB dB Return Loss “On State” DC - 6.0 GHz DC - 14.0 GHz 10 8 13 13 dB dB Return Loss RF1, RF2 “Off State” DC - 6.0 GHz DC - 14.0 GHz 7 6 10 9 dB dB Input Power for 1 dB Compression 0.5 - 14.0 GHz 19 23 dBm Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone) 0.5 - 14.0 GHz 38 43 dBm 3 6 ns ns Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 226 Min. DC - 14 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC347LP3 / 347LP3E v06.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz Insertion Loss Isolation 0 0 ISOLATION (dB) INSERTION LOSS (dB) -10 -1 -2 +25 C +85 C -40 C -3 RF1 RF2 -20 -30 -40 -50 -4 -60 -70 0 5 10 15 20 0 5 FREQUENCY (GHz) Return Loss 15 20 10 0.1 and 1 dB Input Compression Point 0 30 RFC RF1,RF2 ON RF1,RF2 OFF 1 dB Compression Point 0.1 dB Compression Point INPUT P1dB (dBm) -5 RETURN LOSS (dB) 10 FREQUENCY (GHz) -10 -15 25 20 15 -20 -25 10 0 5 10 15 20 0 2 4 FREQUENCY (GHz) 6 8 10 12 14 16 SWITCHES - SMT -5 FREQUENCY (GHz) Input Third Order Intercept Point 50 INPUT IP3 (dBm) 45 40 +25C -40C +85C 35 30 0 2 4 6 8 10 12 14 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 227 HMC347LP3 / 347LP3E v06.0805 Absolute Maximum Ratings SWITCHES - SMT 10 10 - 228 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz Control Voltages RF Input Power (Vctl = -5V) +27 dBm State Bias Condition Control Voltage Range (A & B) +0.5V to -7.5 Vdc Low 0 to -0.5V @ 10 uA Max. High -5V @ 10 uA Typ. to -7V @ 40 uA Typ. (± 0.5 Vdc) Hot Switch Power Level (Vctl = -5 V) +23 dBm Channel Temperature 150 °C Continuous Pdiss (T=85 °C) (derate 2mW/ °C above 85 °C) 0.12 W Thermal Resistance (Insertion Loss Path) 440 °C/W Thermal Resistance (Terminated Path) 540 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1A Truth Table Control Input A Signal Path State B RFC to RF1 RFC to RF2 High Low On Off Low High Off On ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC347LP3 / 347LP3E v06.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz Outline Drawing SWITCHES - SMT 10 NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC347LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC347LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] 347 XXXX [2] 347 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 229 HMC347LP3 / 347LP3E v06.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz Suggested Driver Circuit SWITCHES - SMT 10 10 - 230 Pin Descriptions Pin Number Function Description 1, 5, 9, 12, 16 N/C This pin should be connected to PCB RF ground to maximize isolation 2, 4, 6, 8, 13, 15 GND Package bottom has exposed metal paddle that must also be connected to PCB RF ground. 3, 7, 14 RFC, RF1, RF2 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. 10 CTLB See truth table and control voltage table. 11 CTLA See truth table and control voltage table. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC347LP3 / 347LP3E v06.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 14 GHz Evaluation PCB SWITCHES - SMT 10 List of Materials for Evaluation PCB 105711 [1] Item Description J1 - J3 PCB Mount SRI SMA Connector J4 - J6 DC Pin R1 - R2 100 Ohm Resistor, 0603 Pkg. U1 HMC347LP3 / HMC347LP3E SPDT Switch PCB [2] 107521 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 231