107261-HMC232C8

HMC232C8 v03.1105 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Typical Applications Features The HMC232C8 is ideal for: Isolation: 55 dB @ 2 GHz 43 dB @ 6 GHz • Telecom Infrastructure Insertion Loss: 1.6 dB Typical @ 6 GHz • Microwave Radio & VSAT Non-Reflective Design • Military Radios, Radar & ECM Surface Mount Ceramic Package • Test Instrumentation Direct Replacement for HMC132C8 Functional Diagram General Description The HMC232C8 is a broadband high isolation nonreflective GaAs MESFET SPDT switch in a nonhermetic surface mount ceramic package. Covering DC to 8 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 8 GHz. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. This product is a form, fit & functional replacement for the HMC132C8. SWITCHES - SMT 10 Electrical Specifi cations, TA = +25° C, With 0/-5V Control, 50 Ohm System Parameter 10 - 66 Frequency Insertion Loss DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz Isolation DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz Min. 50 38 37 Typ. Max. Units 1.2 1.6 2.2 1.5 2.0 2.8 dB dB dB 55 43 42 dB dB dB Return Loss “On State” DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz 19 12 10 dB dB dB Return Loss RF1, RF2 “Off State” DC - 2.0 GHz DC - 6.0 GHz DC - 8.0 GHz 13 8 7 dB dB dB Input Power for 1 dB Compression 0.5 - 8.0 GHz 22 26 dBm Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone, 1 MHz Tone Separation) 0.5 - 8.0 GHz 40 46 dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 8.0 GHz 3 5 ns ns For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC232C8 v03.1105 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Insertion Loss Isolation 0 0 -10 ISOLATION (dB) -2 -3 + 25C + 85C - 40C -4 RF1 RF2 -20 -30 -40 -50 -60 -5 -70 0 1 2 3 4 5 6 7 8 0 1 2 3 FREQUENCY (GHz) Return Loss 5 6 7 8 10 0.1 and 1 dB Input Compression Point 0 35 RFC RF1, RF2 ON RF1, RF2 OFF 1 dB Compression Point 0.1 dB Compression Point 30 INPUT P1dB (dBm) -5 RETURN LOSS (dB) 4 FREQUENCY (GHz) -10 -15 -20 25 20 -25 -30 15 0 1 2 3 4 5 6 7 8 0 1 2 3 FREQUENCY (GHz) 4 5 6 7 8 SWITCHES - SMT INSERTION LOSS (dB) -1 FREQUENCY (GHz) Input Third Order Intercept Point 60 INPUT IP3 (dBm) 55 50 45 40 + 25C + 85C - 40C 35 30 0 1 2 3 4 5 FREQUENCY (GHz) 6 7 8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 67 HMC232C8 v03.1105 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Absolute Maximum Ratings SWITCHES - SMT 10 RF Input Power (Vctl= -5V) (0.5 - 8 GHz) +30 dBm (@ +50 °C) Control Voltage Range (A & B) +1.0V to -7.5 Vdc Channel Temperature 150 °C Thermal Resistance 94 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Control Voltages State Bias Condition Low 0 to -0.2V @ 10 uA Max. High -5V @ 10 uA Typ. to -7V @ 45 uA Typ. Truth Table Control Input Signal Path State A B RFC to RF1 RFC to RF2 High Low ON OFF Low High OFF ON Caution: Do not “Hot Switch” power levels greater than +26 dBm (Vctl = 0/-5 Vdc). Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3. PLATING: ELECTROLYTIC GOLD 100-200 MICROINCHES, OVER ELECTROLYTIC NICKEL 100-250 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 10 - 68 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC232C8 v03.1105 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Suggested Driver Circuit Pin Descriptions Pin Number Function Description 1, 4, 7 RF1, RF2, RFC This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. 2, 3, 8 GND Package bottom must also be connected to PCB RF ground. 5 A See truth table and control voltage table. 6 B See truth table and control voltage table. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. SWITCHES - SMT 10 10 - 69 HMC232C8 v03.1105 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Evaluation PCB SWITCHES - SMT 10 List of Materials for Evaluation PBC 107261 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J6 DC Pin R1, R2 100 Ohm Resistor, 0603 Pkg. U1 HMC232C8 SPDT Switch PCB [2] 107112 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 10 - 70 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC232C8 v03.1105 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 8 GHz Notes: SWITCHES - SMT 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. 978-250-3373 Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: Phone: 781-329-4700 • Order online at www.analog.com Order On-line at www.hittite.com Application Support: Phone: 1-800-ANALOG-D Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 10 - 71