107712-HMC369LP3

HMC369LP3 / 369LP3E v04.0210 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT FREQ. MULTIPLIERS - ACTIVE - SMT 4 Typical Applications Features Active Multiplier for X Band Applications: Output Power: +4 dBm • OC-192 Clock Recovery Sub-Harmonic Suppression: 30 dBc • Microwave Radio & VSAT SSB Phase Noise: -142 dBc/Hz • Military Radios, Radar & ECM Single Supply: 5V@ 46 mA • Test Instrumentation 16 Lead 3x3mm SMT Package: 9mm2 Functional Diagram General Description The HMC369LP3 & HMC369LP3E are active miniature x2 frequency multipliers utilizing InGaP GaAs HBT technology in 3x3 mm leadless QFN surface mount packages. Power output is +4 dBm typical from a single +5V supply and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and sub-harmonics is 30 dBc typical with respect to output signal level. The low additive SSB phase noise of -142 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC369LP3(E) is ideal for use in LO multiplier chains allowing reduced parts count versus traditional approaches. The HMC369LP3(E) are also useful for OC-192 clock recovery. The application of 10 GBPS data to the input generates a -7 dBm clock tone at the output with spurious signals suppressed by 25 dB. Electrical Specifi cations, TA = +25° C, Vcc= 5V Parameter Min. Frequency Range, Input Frequency Range, Output Max. Min. -5 Output Power -1 Typ. Max. 5.3 - 6.35 9.9 - 10.6 Input Power Range GHz 10.6 - 12.7 +5 3 -5 0 Units GHz +5 dBm 4 dBm Sub-Harmonic Suppression 30 30 dBc Input Return Loss 17 16 dB Output Return Loss 5.5 6 dB -142 -142 dBc/Hz SSB Phase Noise (100 kHz Offset) Pin= 0 dBm Supply Current (Icc) 4 - 40 Typ. 4.95 - 5.3 46 61 46 61 mA For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC369LP3 / 369LP3E v04.0210 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Output Power vs. Drive Level 8 8 7 7 6 6 5 4 3 2 1 +25 C +85 C -40 C 0 -1 4 5 4 3 2 -10 dBm -5 dBm 0 dBm +5 dBm 1 0 -1 -2 9.5 10 10.5 11 11.5 12 12.5 -2 9.5 13 10 OUTPUT FREQUENCY (GHz) 10.5 11 11.5 12 12.5 13 OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ 0 dBm Drive Level Input Return Loss vs. Temperature 0 8 -5 6 RETURN LOSS (dB) OUTPUT POWER (dBm) 7 5 4 3 2 1 Vcc=4.5V Vcc=5.0V Vcc=5.5V 0 +25 C +85 C -40 C -10 -15 -20 -25 -1 -30 -2 9.5 10 10.5 11 11.5 12 12.5 3 13 3.5 4 4.5 5 5.5 FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) 6 6.5 7 FREQ. MULTIPLIERS - ACTIVE - SMT OUTPUT POWER (dBm) OUTPUT POWER (dBm) Output Power vs. Temperature @ 0 dBm Drive Level Output Return Loss vs. Temperature 0 -1 RETURN LOSS (dB) -2 +25 C +85 C -40 C -3 -4 -5 -6 -7 -8 -9 -10 9.5 10 10.5 11 11.5 12 12.5 13 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 4 - 41 HMC369LP3 / 369LP3E v04.0210 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT SSB Phase Noise Performance, Fout= 10.66 GHz, Input Power= 0 dBm Output Spectrum 4 - 42 10 0 0 -20 SSB PHASE NOISE (dBc/Hz) OUTPUT POWER (dBm) FREQ. MULTIPLIERS - ACTIVE - SMT 4 -10 -20 -30 -40 -60 -80 -100 -40 -120 -50 -140 -60 0 2 4 6 8 10 12 14 16 18 20 22 24 26 FREQUENCY (GHz) -160 2 10 3 10 4 10 5 10 6 10 7 10 OFFSET FREQUENCY (Hz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC369LP3 / 369LP3E v04.0210 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Typical Supply Current vs. Vcc RF Input (Vcc = +5V) +20 dBm Vcc (V) Icc (mA) Vcc +5.5V 4.5 45 Channel Temperature 135 °C 5.0 46 5.5 47 Continuous Pdiss (T=85 °C) (derate 6.8 mW/°C above 85 °C) 440 mW Thermal Resistance (Rth) (junction to ground paddle) 147.8 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 4 FREQ. MULTIPLIERS - ACTIVE - SMT Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC369LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC369LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] 369 XXXX [2] 369 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 4 - 43 HMC369LP3 / 369LP3E v04.0210 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Pin Description FREQ. MULTIPLIERS - ACTIVE - SMT 4 4 - 44 Pin Number Function Description 1, 2, 5 - 8, 11 - 13, 15, 16 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 3 RFIN RF input needs to be DC blocked only if there is an external DC voltage applied to RFIN. 4, 9 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. 10 RFOUT Multiplied Output. AC coupled. No external DC blocks necessary. 14 Vcc Supply voltage 5V ± 0.5V. Interface Schematic For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC369LP3 / 369LP3E v04.0210 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Evaluation PCB FREQ. MULTIPLIERS - ACTIVE - SMT 4 List of Materials for Evaluation PCB 107712 [1] Item Description J1, J2 PCB Mount SMA Connector J3, J4 DC Pin C1 0.01 μF Capacitor, 0603 Pkg. U1 HMC369LP3 / HMC369LP3E x2 Active Multiplier PCB [2] 107710 Eval Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 4 - 45