HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
10 - 24
The HMC497LP4(E) is ideal for:
Very Low Noise Floor: -161 dBm/Hz
• UMTS, GSM or CDMA Basestations
Very High Linearity: +22 dBm OIP3
• Fixed Wireless or WLL
High Output Power: +9 dBm Output P1dB
• ISM Transceivers, 900 & 2400 MHz
High Modulation Accuracy
• GMSK, QPSK, QAM, SSB Modulators
DC - 700 MHz Baseband Input
Functional Diagram
General Description
TE
Features
B
SO
LE
The HMC497LP4(E) is a low noise high linearity
Direct Quadrature Modulator RFIC which is ideal
for digital modulation applications from 100 - 4000
MHz including; Cellular/3G, Broadband Wireless
Access & ISM circuits. Housed in a compact 4x4
mm (LP4) SMT QFN package, the RFIC requires
minimal external components & provides a low cost
alternative to more complicated double upconversion
architectures. The RF output port is single-ended and
matched to 50 Ohms with no external components.
The LO requires -6 to +6 dBm and can be driven in
either differential or single-ended mode while the
baseband inputs will support modulation inputs from
DC - 700 MHz typical. This device is optimized for
a supply voltage of +4.5V to +5.5V and consumes
170 mA @ +5V supply.
Electrical Specifi cations, See Test Conditions on following page herein.
O
MODULATORS - DIRECT QUADRATURE - SMT
10
Typical Applications
Parameter
Min.
Frequency Range, RF
Typ.
Max.
Min.
450 - 960
Output P1dB
Output Noise Floor
Output IP3
+4
Max.
Min.
Typ.
Max.
Min.
2200 - 2700
Typ.
Max.
3400 - 4000
Units
MHz
+8
+8
+7
+6
dBm
-161
-159
-157
-150
dBm/Hz
+17
dBm
+22
Output Power
Typ.
1700 - 2200
+6
+22
+3
+5
+20
+2
+5
0
+3
dBm
Carrier Feedthrough (uncalibrated)
-38
-36
-32
-30
dBm
Sideband Suppression
(uncalibrated)
43
42
33
22
dBc
LO Port Return Loss
25
15
14
13
dB
RF Port Return Loss
11
20
17
11
dB
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
Electrical Specifi cations, (continued)
Parameter
Conditions
Min.
Typ.
Max.
Units
4000
MHz
RF Output
RF Frequency Range
100
RF Return Loss
15
dB
LO Input
100
LO Port Return Loss
3 dB Bandwidth with 50Ω source.
Baseband Input DC Voltage (Vbbdc)
Single-ended Baseband Input Capacitance
DC Power Requirements
Supply Voltage (Vcc1, Vcc2)
Supply Current (Icc1, Icc2)
DC
+1.4
MHz
+6
dBm
+1.5
dB
700
MHz
+1.6
V
Single-ended.
90
μA
De-embed to the lead of the device.
4.5
pF
See Test Conditions Below
LE
Baseband Input DC Bias Current (Ibbdc)
4000
15
Baseband Input Port
Baseband Port Bandwidth
0
TE
-6
+4.5
+5.0
+5.5
168
V
mA
Test Conditions: Unless Otherwise Specifi ed, the Following Test Conditions Were Used
Parameter
B
SO
Temperature
Baseband Input Frequency
Baseband Input DC Voltage (Vbbdc)
Condition
+25 °C
200 kHz
+1.5V
Baseband Input AC Voltage
(Peak to Peak Differential, I and Q)
1.6V
Baseband Input AC Voltage for OIP3 Measurement
(Peak to Peak Differential, I and Q)
800 mV per tone @ 150 & 250 kHz
Frequency Offset for Output Noise Measurements
20 MHz
Supply (Vcc1, Vcc2)
+5.0V
LO Input Power
0 dBm
LO Input Mode
Mounting Configuration
Uncalibrated
O
Sideband & Carrier Feedthrough
Single-Ended through LON
Refer to HMC497LP4 Application Schematic Herein
Calibrated vs. Uncalibrated Test Results
During the Uncalibrated Sideband and Carrier Suppression tests, care is taken to ensure that the I/Q signal paths from
the Vector Signal Generator (VSG) to the Device Under Test (DUT) are equal. The “Uncalibrated, +25 °C” Sideband
and Carrier Suppression plots were measured at room temperature, while the “Uncalibrated, over Temperature”
Sideband and Carrier Suppression plots represent the worst case uncalibrated suppression levels measured at T=
-40 °C, +25 °C, and +85 °C.
The “Calibrated, + 25 °C” Sideband Suppression data was plotted after a manual adjustment of the I/Q amplitude
balance and I/Q phase offset (skew) at +25 °C, and at each LO input power level. The +25 °C adjustment settings
were held constant during tests over temperature. The “Calibrated, over Temperature” plots represent the worst case
calibrated Sideband Suppression levels at T= -40 °C, +25 °C, and +85 °C.
The “Calibrated, +25 °C” Carrier Suppression data was plotted after a manual adjustment of the Ip/In & Qp/Qn DC
offsets at +25 °C, and at each LO input power level. The +25 °C adjustment settings were held constant during tests
over temperature. The “Calibrated, over Temperature” plots represent the worst case Carrier Suppression levels
measured at T= -40 °C, +25 °C, and +85 °C.
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
10
MODULATORS - DIRECT QUADRATURE - SMT
LO Frequency Range
LO Input Power
10 - 25
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
OUTPUT P1dB (dBm), OUTPUT IP3 (dBm)
0
+25C
+85C
-40C
-5
-10
0
400
800 1200 1600 2000 2400 2800 3200 3600 4000
OUTPUT P1dB
10
+25C
+85C
-40C
0
-140
-150
-10
-160
NOISE FLOOR
-20
400
SET-UP NOISE FLOOR
-170
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
Calibrated Carrier Feedthrough [1]
vs. Frequency
10
0
-10
+25C
+85C
-40C
-20
-30
-40
-50
-60
-70
0
B
SO
CARRIER FEEDTHROUGH (dBm)
-130
LE
Uncalibrated Carrier Feedthrough [1]
vs. Frequency
400
0
-10
-20
-30
-50
-60
-70
800 1200 1600 2000 2400 2800 3200 3600 4000
O
Sideband Suppression vs. Frequency
0
400
Return Loss vs. Frequency
-5
+25C
+85C
-40C
-30
-40
-50
RETURN LOSS (dB)
0
0
-20
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
10
-10
+25C
+85C
-40C
-40
FREQUENCY (MHz)
SIDEBAND SUPPRESSION (dBc)
MODULATORS - DIRECT QUADRATURE - SMT
OUTPUT IP3
0
FREQUENCY (MHz)
10
-120
20
CARRIER FEEDTHROUGH (dBm)
OUTPUT POWER (dBm)
10
5
30
OUTPUT NOISE FLOOR @ 20 MHz (dBm/Hz)
10
Output IP3, P1dB & Noise Floor
@ 20 MHz Offset vs. Frequency
TE
Wideband Performance vs. Frequency
RF
LO
-10
-15
-20
-25
-30
-60
-70
-35
0
400
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
0
400
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
[1] See note titled “Calibrated vs. Uncalibrated test results” herein.
10 - 26
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
0
-30
SIDEBAND SUPPRESSION
-5
-45
0
400
-60
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
0
-150
NOISE FLOOR
-10
-20
400
-160
SET-UP NOISE FLOOR
-170
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
10
0
-10
-6 dBm
0 dBm
+6 dBm
-20
-30
-40
-50
-60
-70
0
400
0
-10
-20
-40
-50
-60
-70
800 1200 1600 2000 2400 2800 3200 3600 4000
0
400
-10
-15
-20
-25
0
-30
SIDEBAND SUPPRESSION
-35
-40
-5
-45
-50
-55
-10
0
400
FREQUENCY (MHz)
-60
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (MHz)
30
-120
OUTPUT IP3
20
-130
OUTPUT P1dB
10
0
-140
-150
NOISE FLOOR
-10
-160
MEASUREMENT NOISE FLOOR
-20
0
400
OUTPUT NOISE FLOOR (dBm/Hz)
OUTPUT POWER
OUTPUT P1dB (dBm), OUTPUT IP3 (dBm)
-5
SIDEBAND SUPPRESSION (dBc)
O
0
5
800 1200 1600 2000 2400 2800 3200 3600 4000
Output IP3, P1dB & Noise Floor
@ 20 MHz vs. Offset Frequency
Over Supply Voltage [1]
Wideband Performance
vs. Frequency Over Supply Voltage [1]
10
-6 dBm
0 dBm
+6 dBm
-30
FREQUENCY (MHz)
OUTPUT POWER (dBm)
-140
Calibrated Carrier Feedthrough [2]
vs. Frequency
B
SO
CARRIER FEEDTHROUGH (dBm)
OUTPUT P1dB
10
0
Uncalibrated Carrier Feedthrough [2]
vs. Frequency
10
-130
LE
-10
20
-170
800 1200 1600 2000 2400 2800 3200 3600 4000
FREQUENCY (GHz)
10
MODULATORS - DIRECT QUADRATURE - SMT
-15
-120
OUTPUT IP3
CARRIER FEEDTHROUGH (dBm)
OUTPUT POWER (dBm)
5
SIDEBAND SUPPRESSION (dBc)
OUTPUT POWER
30
TE
0
OUTPUT NOISE FLOOR @ 20 MHz (dBm/Hz)
10
OUTPUT P1dB (dBm), OUTPUT IP3 (dBm)
Output IP3, P1dB & Noise Floor @ 20 MHz
Offset vs. Frequency Over LO Power [3]
Wideband Performance
vs. Frequency Over LO Power [3]
[1] See note titled “Calibrated vs. Uncalibrated test results” herein.
[2] Supply voltage from +4.5 to +5.5V.
[3] LO Power from -6 dBm to +6 dBm
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
10 - 27
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
ACPR & Output Noise
for W-CDMA @ 2140 MHz
Output Noise @ 20 MHz Offset
vs. LO Power Over Temperature
ACPR (dBc)
-140
-70
1 Carrier ACPR
-150
1 Carrier NF
2 Carrier NF
-75
10
-80
-30
-27
-24
-21
-18
-160
-15
-12
-9
-6
-3
0
-170
RF Power +5 dBm
-150
T=+25C
T=+85C
T= -40C
-155
-160
-165
-6
CARRIER OUTPUT POWER (dBm)
-5
-4
-3
-2
-1
0
1
2
3
4
5
LE
Compression Characteristic @ 2140 MHz
Power & Linearity @ 2140 MHz
vs. Baseband Voltage
25
10
10
6
LO POWER (dBm)
2 TONES OUTPUT POWER (dBm)
3rd ORDER INTERMOD (dBm)
-10
-20
-30
-40
-50
0.8
B
SO
POWER (dBm)
0
OUTPUT POWER (dBm)
9
0.9
1
OUTPUT IP3
8
5
3
5
2
0
0
0.8
0.9
1
2
INPUT BASEBAND VOLTAGE (Vp-p diff)
Single Tone
O
Single Tone
EVM vs. LO Harmonic Level & Sideband
Rejection for EDGE @ 1900 MHz
1200
2000
1100
EVM (m%rms)
1800
2
rd
1600
EVM (m%rms)
SBR: -40 dBc
900
800
LO 2
nd
10
OUTPUT POWER
4
INPUT BASEBAND VOLTAGE PER TONE (Vp-p diff)
1000
15
6
1
2
EVM vs. LO Harmonic Level & Sideband
Rejection for EDGE @ 900 MHz
20
7
OIP3 (dBm)
MODULATORS - DIRECT QUADRATURE - SMT
-145
TE
2 Carrier ACPR
-65
-140
OUTPUT NOISE @20 MHz (dBm/Hz)
-130
OUTPUT NOISE @ 20 MHz Offset (dBm/Hz)
-60
Harmonic Level
-30 dBc
700
-16 dBc
LO 3 Harmonic Level
-70 dBc
1400
-30 dBc
SBR: -42 dBc
2
1200
1000
600
SBR: -48 dBc
500
800
2
SBR: -48 dBc
2
600
400
-70
-65
-60
-55
-50
-45
-40
-35
-30
rd
LO 3 Harmonic Level (dBc)
-30
-25
-20
-15
-10
-5
nd
LO 2 Harmonic Level (dBc)
Note 1: W-CDMA (Modulation Set-up for ACPR Mode); The Baseband I and Q input signals were generated using “Test Model 1 with 64 channels”
settings in the Agilent E3844C.
Note 2: The I/Q baseband amplitude and phase inputs were offset to achieve Sideband Rejection (SBR) levels. LO = +6 dBm, SSB Power = 0 dBm
10 - 28
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
Absolute Maximum Ratings
Baseband Input Voltage (AC + DC)
(Reference to GND)
0.0V to +2.8V
Channel Temperature
150 °C
Continuous Pdiss (T = 85°C)
(Derate 30 mW/°C above 85°C)
1.8 Watts
Thermal Resistance (Rth)
(junction to lead)
34 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
B
SO
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
O
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC497LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC497LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H497
XXXX
[2]
H497
XXXX
10
MODULATORS - DIRECT QUADRATURE - SMT
+18 dBm
TE
0V to +6V
LO Input Power
LE
Vcc1, Vcc2
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
10 - 29
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
Pin Descriptions
10 - 30
Description
1,6, 7, 13, 15
N/C
Not connected.
2, 5, 8, 11,
12, 14, 17, 19,
20, 23
GND
These pins and the ground paddle should be
connected to a high quality RF/DC ground.
3, 4
LOP, LON
LO inputs. Need DC decoupling capacitors.
The ports could be driven single ended or differentially.
9, 10
QN, QP
Q channel differential baseband input. These high
impedance ports should be biased around 1.5V DC.
Nominal recommended baseband input is around
1.6V pp differential.
18
LE
B
SO
16
Interface Schematic
TE
Function
RFOUT
RF output. 50 Ohms. Needs DC blocking capacitor.
Vcc1
Supply voltage for the mixer and
output stages 79mA @ +5.0V.
21, 22
IP, IN
I channel differential baseband input.
These high impedance ports should be at the
same bias voltage (VbbDC) as Qn & Qp.
24
Vcc2
Supply voltage for the LO stage 88mA @ +5V.
O
MODULATORS - DIRECT QUADRATURE - SMT
10
Pin Number
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC497LP4 / 497LP4E
v04.1108
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
O
List of Materials for Evaluation PCB 108962 [1]
Item
Description
J1 - J7
PC Mount SMA Connector
J8, J9
DC Molex Connector
C1 - C3
100 pF Chip Capacitor, 0402 Pkg.
C4, C5
1000 pF Chip Capacitor, 0402 Pkg.
C6, C7
4.7 uF, Case A, Tantulum
U1
HMC497LP4 Modulator
PCB [2]
108960 Eval Board
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
10
MODULATORS - DIRECT QUADRATURE - SMT
B
SO
LE
TE
Evaluation PCB
10 - 31
HMC497LP4 / 497LP4E
v03.0307
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
TE
Application & Evaluation PCB Schematic
10 - 32
LE
B
SO
Characterization Set-up
O
MODULATORS - DIRECT QUADRATURE - SMT
10
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
HMC497LP4 / 497LP4E
v03.0307
SiGe WIDEBAND DIRECT
MODULATOR RFIC, 100 - 4000 MHz
For price,
delivery,
and to place
orders: Analog Devices, Inc.,
For price, delivery, and to place orders, please contact
Hittite
Microwave
Corporation:
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343
Fax:
978-250-3373
Phone: 781-329-4700
• Order
online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Order On-line at www.hittite.com
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
10
MODULATORS - DIRECT QUADRATURE - SMT
O
B
SO
LE
TE
Notes:
10 - 33
工商网监
湘ICP备2023018690号
