HMC342LC4
v04.0514
LOW NOISE AMPLIFIERS - SMT
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
Typical Applications
Features
The HMC342LC4 is ideal for:
Noise Figure: 3.5 dB
• Point-to-Point Radios
Gain: 22 dB
• Point-to-Multi-Point Radios & VSAT
Single Positive Supply: +3V @ 43 mA
• Test Equipment & Sensors
50 Ohm Matched Input/Output
• Military End-Use
RoHS Compliant 4x4 mm SMT Package
Functional Diagram
General Description
The HMC342LC4 is a GaAs pHEMT MMIC Low
Noise Amplifier housed in a leadless 4x4 mm RoHS
compliant SMT package. Operating from 13 to 25
GHz, the amplifier provides 22 dB of gain and +19
dBm of output IP3 from a single +3V supply. The
low noise figure performance of 3.5 dB is ideal for
receive and transmit pre-driver applications. The RF
I/Os are DC blocked and matched to 50 Ohms for
ease of use. The HMC342LC4 allows the use of
surface mount manufacturing techniques and requires
no external matching components.
Electrical Specifications, TA = +25° C, Vdd = +3V, Idd = 43 mA
Parameter
Min.
Frequency Range
Gain
Gain Variation Over Temperature
1
Typ.
Max.
Min.
13 - 18
19
Typ.
Max.
Min.
18 - 22
22
17
Typ.
Max.
22 - 25
20
16
Units
GHz
19
dB
0.025
0.035
0.025
0.035
0.025
0.035
dB/ °C
Noise Figure
3.5
4.0
3.5
4.0
3.5
4.5
dB
Input Return Loss
15
15
10
Output Return Loss
15
20
15
dB
Output Power for 1 dB Compression (P1dB)
7
8
9
dBm
Saturated Output Power (Psat)
9
11
11.5
dBm
dB
Output Third Order Intercept (IP3)
16
19
20
dBm
Supply Current (Idd) (Vdd = +3V)
43
43
43
mA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC342LC4
v04.0514
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
25
10
22
5
GAIN (dB)
RESPONSE (dB)
15
S21
0
S11
-5
S22
-10
19
+25 C
+85 C
-40 C
16
-15
-20
13
-25
-30
10
8
10
12
14
16
18
20
22
24
26
28
12
30
14
16
FREQUENCY (GHz)
Input Return Loss vs. Temperature
22
24
26
0
+25 C
+85 C
-40 C
-5
RETURN LOSS (dB)
-5
RETURN LOSS (dB)
20
Output Return Loss vs. Temperature
0
-10
-15
-20
-25
+25 C
+85 C
-40 C
-10
-15
-20
-25
-30
-30
12
14
16
18
20
22
24
26
12
14
16
FREQUENCY (GHz)
18
20
22
24
26
24
26
FREQUENCY (GHz)
Noise Figure vs. Temperature
Output IP3 vs. Temperature
10
24
22
+25 C
+85 C
-40 C
8
20
6
IP3 (dBm)
NOISE FIGURE (dB)
18
FREQUENCY (GHz)
LOW NOISE AMPLIFIERS - SMT
28
25
4
18
16
14
2
+25 C
+85 C
-40 C
12
0
10
12
14
16
18
20
FREQUENCY (GHz)
22
24
26
12
14
16
18
20
22
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC342LC4
v04.0514
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
14
12
12
10
10
Psat (dBm)
P1dB (dBm)
Psat vs. Temperature
14
8
6
8
6
+25 C
+85 C
+25 C
+85 C
-40 C
4
4
2
-40 C
2
0
0
12
14
16
18
20
22
24
26
12
14
16
FREQUENCY (GHz)
0
19
-10
ISOLATION (dB)
Pout
Gain
PAE
9
4
-1
-6
-26
20
22
24
26
Reverse Isolation vs. Temperature
24
14
18
FREQUENCY (GHz)
Power Compression @ 20 GHz
Pout (dBm), GAIN (dB), PAE (%)
LOW NOISE AMPLIFIERS - SMT
P1dB vs. Temperature
+25 C
+85 C
-40 C
-20
-30
-40
-50
-60
-24
-22
-20
-18
-16
-14
-12
-10
-8
-6
-4
12
14
16
INPUT POWER (dBm)
18
20
22
24
26
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), NOISE FIGURE (dB)
Gain, Power & Noise Figure
vs. Supply Voltage @ 20 GHz
3
24
20
16
Gain
P1dB
Psat
Noise Figure
12
8
4
0
2.7
3
3.3
Vdd Supply Voltage (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC342LC4
v04.0514
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
Drain Bias Voltage (Vdd)
+5.5 Vdc
RF Input Power (RFIN)(Vdd = +3.0 Vdc)
0 dBm
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 3.62 mW/°C above 85 °C)
0.326 W
Thermal Resistance
(channel to ground paddle)
276 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Vdd (Vdc)
Idd (mA)
+2.7
42
+3.0
43
+3.3
44
Note: Amplifier will operate over full voltage ranges shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
LOW NOISE AMPLIFIERS - SMT
Typical Supply Current vs. Vdd
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC342LC4
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H342
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC342LC4
v04.0514
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
Pin Descriptions
LOW NOISE AMPLIFIERS - SMT
Pin Number
5
Function
Description
N/C
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
2, 4, 15, 17
GND
Package base has an exposed metal ground that must
also be connected to RF/DC ground.
3
RFIN
This pin is AC coupled
and matched to 50 Ohms.
16
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
21
Vdd
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 1000pF, and 2.2 µF are required.
1, 5 - 14,
18 - 20, 22 - 24
Interface Schematic
Application Circuit
Component
Value
C1
100 pF
C2
1,000 pF
C3
2.2 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC342LC4
v04.0514
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 13 - 25 GHz
LOW NOISE AMPLIFIERS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 110209
Item
Description
J1, J2
2.92 mm PC mount K-connector
J3, J4
DC Pin
C1
100 pF capacitor, 0402 Pkg..
C2
1,000 pF Capacitor, 0603 Pkg..
C3
2.2µF Capacitor, Tantalum
U1
HMC342LC4 Amplifier
PCB [2]
108535 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6