110227-HMC510LP5

HMC510LP5/510LP5E v05.0114 VCOS WITH Fo/2 OUTPUT - SMT MMIC VCO WITH HALF FREQUENCY OUTPUT 8.45 - 9.55 GHz Typical Applications Features Low noise MMIC VCO w/Half Frequency, Divide-by-4 Outputs for: Dual Output: Fo = 8.45 - 9.55 GHz Fo/2 = 4.225 - 4.775 GHz • Point to Point/Multipoint Radio Pout: +13 dBm • Test Equipment & Industrial Controls Phase Noise: -116 dBc/Hz @100 kHz Typ. • SATCOM No External Resonator Needed • Military End-Use 32 Lead 5x5mm SMT Package: 25mm² Functional Diagram General Description The HMC510LP5 & HMC510LP5E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC510LP5 & HMC510LP5E integrate resonators, negative resistance devices, varactor diodes and feature half frequency and divide-by-4 outputs. The VCO’s phase noise performance is excellent over temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +13 dBm typical from a +5V supply voltage. The prescaler and RF/2 functions can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components. Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V Parameter Frequency Range Power Output Min. Fo Fo/2 RFOUT RFOUT/2 RFOUT/4 Supply Current +10 +8 -8 -116 Vtune Icc(Dig) + Icc(Amp) + Icc(RF) 2 270 315 Output Return Loss Pulling (into a 2.0:1 VSWR) 1 1/2 2nd 3rd Units GHz GHz +15 +14 -4 Tune Port Leakage Current (Vtune= 13V) Harmonics/Subharmonics Max. 8.45 - 9.55 4.225 - 4.775 SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT Tune Voltage Typ. dBm dBm dBm dBc/Hz 13 V 360 mA 10 µA 2 dB 40 15 40 dBc dBc dBc 6 MHz pp Pushing @ Vtune= 5V 20 MHz/V Frequency Drift Rate 0.8 MHz/°C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC510LP5/510LP5E v05.0114 MMIC VCO WITH HALF FREQUENCY OUTPUT 8.45 - 9.55 GHz Frequency vs. Tuning Voltage, T= 25°C 9.8 OUTPUT FREQUENCY (GHz) 10.2 9.8 OUTPUT FREQUENCY (GHz) 10.2 9.4 9 8.6 8.2 7.8 7.4 7 9.4 9 8.6 8.2 7.8 7.4 7 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 TUNING VOLTAGE (Vdc) +25C +85C -40C 5 6 Vcc=4.75V 7 8 9 10 11 12 13 700 16 600 14 500 400 300 200 Vcc=5.00V Vcc=5.25V Output Power vs. Tuning Voltage, Vcc = +5V OUTPUT POWER (dBm) SENSITIVITY(MHz/V) Sensitivity vs. Tuning Voltage, Vcc = +5V 100 12 10 8 6 4 2 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 TUNING VOLTAGE (Vdc) +25C +85C 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (Vdc) +25C -40C SSB Phase Noise vs. Tuning Voltage +85C -40C SSB Phase Noise @ Vtune = +5V 0 SSB PHASE NOISE (dBc/Hz) -75 SSB PHASE NOISE (dBc/Hz) 4 TUNING VOLTAGE (Vdc) VCOS WITH Fo/2 OUTPUT - SMT Frequency vs. Tuning Voltage, Vcc = +5V -85 -95 -20 -40 -60 -80 -100 -105 -120 -140 -115 -160 -125 0 1 2 3 4 5 6 7 8 9 10 11 12 13 3 4 10 10 5 10 6 7 10 10 OFFSET FREQUENCY (Hz) TUNING VOLTAGE (Vdc) 10kHz OFFSET -180 2 10 100kHz OFFSET +25C +85C -40C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC510LP5/510LP5E v05.0114 MMIC VCO WITH HALF FREQUENCY OUTPUT 8.45 - 9.55 GHz 5.1 16 4.9 14 OUTPUT POWER (dBm) OUTPUT FREQUENCY (GHz) RFOUT/2 Output Power vs. Tuning Voltage, Vcc = +5V 4.7 4.5 4.3 4.1 3.9 12 10 8 6 4 2 3.7 0 3.5 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 +25C 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (Vdc) TUNING VOLTAGE (Vdc) +85C -40C Divide-by-4 Frequency vs. Tuning Voltage, Vcc = +5V +25C +85C -40C Divide-by-4 Output Power vs. Tuning Voltage, Vcc = +5V 2.55 0 2.45 -1 OUTPUT POWER (dBm) OUTPUT FREQUENCY (GHz) VCOS WITH Fo/2 OUTPUT - SMT RFOUT/2 Frequency vs. Tuning Voltage, Vcc = +5V 2.35 2.25 2.15 2.05 1.95 1.85 -2 -3 -4 -5 -6 -7 -8 -9 1.75 -10 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 TUNING VOLTAGE (Vdc) +25C +85C 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (Vdc) -40C Absolute Maximum Ratings Vcc(Dig), Vcc(Amp), Vcc(RF) +5.5 Vdc Vtune 0 to +15V Storage Temperature -65 to +150 °C ESD Sensitivity (HBM) Class 1A +25C +85C -40C Reliability Information Junction Temperature To Maintain 1 Million Hour MTTF 135 °C Nominal Junction Temperature (T=85 °C) 121.2 °C Thermal Resistance (junction to ground paddle) 23 °C/W Operating Temperature -40 to +85 °C Typical Supply Current vs. Vcc ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Vcc (V) Icc (mA) 4.75 290 5.00 315 5.25 340 Note: VCO will operate over full voltage range shown above. 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC510LP5/510LP5E v05.0114 MMIC VCO WITH HALF FREQUENCY OUTPUT 8.45 - 9.55 GHz NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC510LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL3 [1] HMC510LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [2] VCOS WITH Fo/2 OUTPUT - SMT Outline Drawing Package Marking [3] H510 XXXX H510 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Pin Descriptions Pin Number Function Description 1-3, 8-10, 13-18, 20, 22-28, 30-32 N/C No Connection. These pins may be connected to RF/ DC ground. Performance will not be affected. 4 RFOUT/4 Divide-by-4 output. DC block required. 6 Vcc (Dig) Supply voltage for prescaler. If prescaler is not required, this pin may be left open to conserve approximately 65 mA of current. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC510LP5/510LP5E v05.0114 MMIC VCO WITH HALF FREQUENCY OUTPUT 8.45 - 9.55 GHz VCOS WITH Fo/2 OUTPUT - SMT Pin Descriptions Pin Number Function Description 7 Vcc (Amp) Supply voltage, for RFOUT/2 output. If RFOUT/2 is not required, this pin may be left open to conserve approximately 30 mA of current. 12 RFOUT/2 Half frequency output (AC coupled). 19 RF OUT RF output (AC coupled). 21 Vcc (RF) Supply Voltage, +5V 29 VTUNE Control voltage and modulation input. Modulation bandwidth dependent on drive source impedance. See “Determining the FM Bandwidth of a Wideband Varactor Tuned VCO” application note. 5, 11, Paddle GND Package bottom has an exposed metal paddle that must be connected to RF/DC ground. Interface Schematic Typical Application Circuit 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC510LP5/510LP5E v05.0114 MMIC VCO WITH HALF FREQUENCY OUTPUT 8.45 - 9.55 GHz VCOS WITH Fo/2 OUTPUT - SMT Evaluation PCB List of Materials for Evaluation PCB 110227 [1] Item Description J1 - J4 PCB Mount SMA RF Connector J5 - J6 2 mm DC Header C1 - C3 100 pF Capacitor, 0402 Pkg. C4 1,000 pF Capacitor, 0402 Pkg. C5 - C7 2.2 µF Tantalum Capacitor U1 HMC510LP5 / HMC510LP5E VCO PCB [2] 110225 Eval Board [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6