HMC512LP5/LP5E
v06.0114
VCOS WITH Fo/2 OUTPUT - SMT
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
Typical Applications
Features
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
Triple Output: Fo = 9.6 - 10.8 GHz
Fo/2 = 4.8 - 5.4 GHz
Fo/4 = 2.4 - 2.7 GHz
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• SATCOM
• Military End-Use
Functional Diagram
Pout: +9 dBm
Phase Noise: -110 dBc/Hz @100 kHz Typ.
No External Resonator Needed
32 Lead 5 x 5 mm SMT Package: 25 mm²
General Description
The HMC512LP5 & HMC512LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC512LP5 & HMC512LP5E integrate resonators, negative resistance devices, varactor diodes
and feature half frequency and divide-by-4 outputs.
The VCO’s phase noise performance is excellent over
temperature, shock, and process due to the oscillator’s monolithic structure. Power output is +9 dBm
typical from a +5V supply voltage. The prescaler and
RF/2 functions can be disabled to conserve current if
not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components.
Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Parameter
Frequency Range
Power Output
Min.
Fo
Fo/2
RFOUT
RFOUT/2
RFOUT/4
Supply Current
+3
+6
-8
-110
Vtune
Icc(Dig) + Icc(Amp) + Icc(RF)
2
250
330
Output Return Loss
Pulling (into a 2.0:1 VSWR)
1
1/2
2nd
3rd
Units
GHz
GHz
+15
+14
-3
Tune Port Leakage Current (Vtune= 12V)
Harmonics/Subharmonics
Max.
9.6 - 10.8
4.8 - 5.4
SSB Phase Noise @ 100 kHz Offset,
Vtune= +5V @ RFOUT
Tune Voltage
Typ.
dBm
dBm
dBm
dBc/Hz
13
V
370
mA
10
µA
3
dB
33
25
35
dBc
dBc
dBc
5
MHz pp
Pushing @ Vtune= 5V
30
MHz/V
Frequency Drift Rate
1.2
MHz/°C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC512LP5/LP5E
v06.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
11.2
10.8
10.8
10.4
10
9.6
9.2
8.8
8.4
8
10.4
10
9.6
9.2
8.8
8.4
8
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
TUNING VOLTAGE (Vdc)
+25C
+85C
-40C
Vcc= 4.75V
700
16
600
14
OUTPUT POWER (dBm)
SENSITIVITY (MHz/Volt)
6
7
8
9
10 11 12 13
Vcc= 5.00V
Vcc= 5.25V
Output Power vs. Tuning Voltage
Sensitivity vs. Tuning Voltage
500
400
300
200
100
12
10
8
6
4
2
0
0
0
1
2
3
4
5
6
7
8
9
0
10 11 12 13
1
2
3
+25C
+85C
SSB PHASE NOISE (dBc/Hz)
-80
-85
-90
-95
-100
-105
-110
-115
-120
-125
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (Vdc)
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
-120
-130
-140
-150
-160
-170
1e+2
1e+3
7
8
9
10 11 12 13
+85C
-40C
1e+4
1e+5
1e+6
1e+7
OFFSET FREQUENCY (Hz)
+25C
10khz
6
SSB Phase Noise @ Vtune = +5V
-75
1
5
+25C
-40C
SSB Phase Noise vs. Tuning Voltage
0
4
TUNING VOLTAGE (Vdc)
TUNING VOLTAGE (Vdc)
SSB PHASE NOISE (dBc/Hz)
5
TUNING VOLTAGE (Vdc)
VCOS WITH Fo/2 OUTPUT - SMT
Frequency vs. Tuning Voltage, T = 25°C
11.2
OUTPUT FREQUENCY (GHz)
OUTPUT FREQUENCY (GHz)
Frequency vs. Tuning Voltage
+85C
-40C
100khz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC512LP5/LP5E
v06.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
5.8
16
5.6
14
OUTPUT POWER (dBm)
OUTPUT FREQUENCY (GHz)
RFOUT/2 Output Power
vs. Tuning Voltage
5.4
5.2
5
4.8
4.6
4.4
12
10
8
6
4
2
4.2
0
4
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
+25C
+85C
0
-1
2.7
-2
OUTPUT POWER (dBm)
2.9
2.6
2.5
2.4
2.3
2.2
6
7
+85C
-40C
-7
-8
8
9
10 11 12 13
0
1
2
3
TUNING VOLTAGE (Vdc)
+25C
10 11 12 13
-6
-9
5
9
-5
-10
4
8
-4
2
3
7
-3
2.1
2
6
Divide-by-4 Output Power
vs. Tuning Voltage
2.8
1
5
+25C
-40C
Divide-by-4 Frequency
vs. Tuning Voltage
0
4
TUNING VOLTAGE (Vdc)
TUNING VOLTAGE (Vdc)
OUTPUT FREQUENCY (GHz)
VCOS WITH Fo/2 OUTPUT - SMT
RFOUT/2 Frequency
vs. Tuning Voltage
+85C
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (Vdc)
-40C
Absolute Maximum Ratings
Vcc(Dig), Vcc(Amp), Vcc(RF)
+5.5 Vdc
Vtune
0 to +15V
Storage Temperature
-65 to +150 °C
+25C
+85C
-40C
Reliability Information
Junction Temperature to Maintain
1 Million Hour MTTF
135 °C
Nominal Junction Temperature
(T = 85 °C)
123 °C
Thermal Resistance
(junction to ground paddle)
23 °C/W
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vcc
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Vcc (V)
Icc (mA)
4.75
300
5.00
330
5.25
360
Note: VCO will operate over full voltage range shown above.
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC512LP5/LP5E
v06.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC512LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL3
[1]
HMC512LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL3
[2]
VCOS WITH Fo/2 OUTPUT - SMT
Outline Drawing
Package Marking [3]
H512
XXXX
H512
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Description
1 - 3, 8 - 10, 13 - 18,
20, 22 - 28, 30 - 32
N/C
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
4
RFOUT/4
Divide-by-4 output. DC block required.
6
Vcc (Dig)
Supply voltage for prescaler. If prescaler is not
required, this pin may be left open to conserve
approximately 65 mA of current.
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC512LP5/LP5E
v06.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
VCOS WITH Fo/2 OUTPUT - SMT
Pin Descriptions
Pin Number
Function
Description
7
Vcc (Amp)
Supply voltage for RFOUT/2 output. If RFOUT/2
is not required, this pin may be left open to
conserve approximately 30 mA of current.
12
RFOUT/2
Half frequency output (AC coupled).
19
RF OUT
RF output (AC coupled).
21
Vcc (RF)
Supply Voltage, +5V
29
VTUNE
Control voltage and modulation input. Modulation
bandwidth dependent on drive source impedance. See
“Determining the FM Bandwidth of a Wideband Varactor Tuned VCO” application note.
5, 11, Paddle
GND
Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
Interface Schematic
Typical Application Circuit
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC512LP5/LP5E
v06.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
VCOS WITH Fo/2 OUTPUT - SMT
Evaluation PCB
List of Materials for Evaluation PCB 110227 [1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5 - J6
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1,000 pF Capacitor, 0402 Pkg.
C5 - C7
2.2 µF Tantalum Capacitor
U1
HMC512LP5 / HMC512LP5E VCO
PCB [2]
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
工商网监
湘ICP备2023018690号
