112697-HMC448LC3B

HMC448LC3B v03.0514 FREQ. MULTIPLIERS - ACTIVE - SMT SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 20 - 25 GHz OUTPUT Typical Applications Features The HMC448LC3B is suitable for: Output Power: +11 dBm • Clock Generation Applications: SONET OC-192 & SDH STM-64 Wide Input Power Range: -4 to +6 dBm • Point-to-Point & VSAT Radios • Test Instrumentation Fo, 3Fo Isolation: >20 dBc @ Fout= 20 GHz 100 KHz SSB Phase Noise: -135 dBc/Hz Single Supply: +5V@ 48 mA • Military & Space RoHS Compliant 3x3 mm SMT Package Functional Diagram General Description The HMC448LC3B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a 0 dBm signal, the multiplier provides +11 dBm typical output power from 22 to 25 GHz. The Fo and 3Fo isolations are >20 dBc up to 22 GHz. This multi-rate frequency multiplier can be used in the generation of a half rate clock for 40 Gbps systems or as part of a multiplier chain to generate a full rate 40 Gbps clock. The HMC448LC3B is also ideal for use in LO multiplier chains for Pt-to-Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -135 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The HMC448LC3B eliminates the need for wire bonding, allowing the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25° C, Vdd = +5V, 0 dBm Drive Level Parameter Min. Frequency Range, Input Frequency Range, Output Output Power Max. Min. 20 - 22 5 9 Typ. 11 - 12.5 7.5 Max. Units GHz 22 - 25 GHz 11 dBm Fo Isolation (with respect to output level) 24 15 dBc 3Fo Isolation (with respect to output level) 25 25 dBc Input Return Loss 10 7 dB Output Return Loss 6 10 dB -135 -135 dBc/Hz 48 48 mA SSB Phase Noise (100 kHz Offset) Supply Current (Idd) 1 Typ. 10 - 11 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC448LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 20 - 25 GHz OUTPUT Output Power vs. Temperature @ 0 dBm Drive Level Output Power vs. Drive Level 12 9 6 +25C +85C -40C 3 +6 dBm 12 +4 dBm 8 -4 dBm 4 -2 dBm 0 0 dBm +2 dBm -6 dBm -4 0 -8 18 19 20 21 22 23 24 25 26 18 20 OUTPUT FREQUENCY (GHz) 22 24 26 OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ 0 dBm Drive Level Isolation @ 0 dBm Drive Level 15 15 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 10 12 9 6 Vdd=4.5V Vdd=5.0V Vdd=5.5V 3 5 0 Fo 2Fo 3Fo -5 -10 -15 -20 0 -25 18 19 20 21 22 23 24 25 26 18 19 OUTPUT FREQUENCY (GHz) 20 21 22 23 24 25 FREQ. MULTIPLIERS - ACTIVE - SMT 16 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 15 26 OUTPUT FREQUENCY (GHz) Pin vs. Pout @ 3 Frequencies OUTPUT POWER (dBm) 14 10 6 Fout= 20 GHz Fout= 22 Ghz Fout= 25 GHz 2 -2 -6 -6 -4 -2 0 2 4 6 8 INPUT POWER (dBm) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC448LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 20 - 25 GHz OUTPUT Output Return Loss vs. Temperature 0 0 -5 -4 RETURN LOSS (dB) RETURN LOSS (dB) -10 -15 +25C +85C -40C -20 -8 +25C +85C -40C -12 -16 -25 -20 9 10 11 12 13 18 19 20 21 FREQUENCY (GHz) 22 23 24 25 26 FREQUENCY (GHz) SSB Phase Noise Performance, Fout = 20.4 GHz, Pin = 0 dBm 0 -20 SSB PHASE NOISE (dBc/Hz) FREQ. MULTIPLIERS - ACTIVE - SMT Input Return Loss vs. Temperature -40 -60 -80 -100 -120 -140 -160 2 10 3 10 4 10 5 10 6 10 7 10 OFFSET FREQUENCY (Hz) 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC448LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 20 - 25 GHz OUTPUT RF Input (Vcc= +5V) +20 dBm Vdd (Vdc) Idd (mA) Supply Voltage (Vdd) +6.0 Vdc 4.5 47 Channel Temperature 175 °C 5.0 48 5.5 49 Continuous Pdiss (T= 85 °C) (derate 8.3 mW/°C above 85 °C) 744 mW Thermal Resistance (channel to ground paddle) 121 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing FREQ. MULTIPLIERS - ACTIVE - SMT Typical Supply Current vs. Vdd Absolute Maximum Ratings NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish HMC448LC3B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H448 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC448LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 20 - 25 GHz OUTPUT FREQ. MULTIPLIERS - ACTIVE - SMT Pin Description 5 Pin Number Function Description 1 Vdd Supply voltage 5V ± 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 µF are required. 2, 3, 7-9 N/C This pin may be connected to RF/DC ground. Performance will not be affected. 4, 6, 10, 12 GND Package bottom must also be connected to RF/DC ground. 5 RFIN Pin is AC coupled and matched to 50 Ohm from 10.0 - 12.5 GHz. 11 RFOUT Pin is AC coupled and matched to 50 Ohm from 20 - 25 GHz. Interface Schematic Application Circuit Component Value C1 100 pF C2 1,000 pF C3 2.2 µF Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC448LC3B v03.0514 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 20 - 25 GHz OUTPUT FREQ. MULTIPLIERS - ACTIVE - SMT Evaluation PCB List of Materials for Evaluation PCB 112697 [1] Item Description J1 PCB Mount SRI SMA Connector J2 PCB Mount SRI K Connector J3 - J4 DC Pin C1 100 pF Capacitor, 0402 Pkg. C2 1,000 pF Capacitor, 0603 Pkg. C3 2.2 µF Tantalum Capacitor U1 HMC448LC3B x2 Active Multiplier PCB [2] 112841 Eval Board The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6